1,150 research outputs found
Inseminación artificial na vaca
Licenciatura en VeterinariaA Obstetricia e Reprodución (131504) é unha materia que se imparte no quinto curso da licenciatura en Veterinaria. Non existen
requisitos previos legais e calquera alumno matriculado na licenciatura en Veterinaria pode cursar esta materia. Porén, é
conveniente que o alumnado teña coñecementos previos de anatomía e fisioloxía veterinaria, así como de patoloxía xeral e propedeútica clínica. Tamén sería aconsellable que os estudantes teñan
coñecementos básicos de TICs, xa que serán de aplicación na busca de información, para o manexo de bases de datos e para empregar a
aula virtual coa que conta a materia. Coma sempre, sería ideal contar con coñecementos básicos de inglés, xa que a maior parte
dos artigos científicos están publicados nese idioma.
A xustificación de editar esta unidade didáctica nace da importancia do tema que se vai tratar. A inseminación artificial na especie bovina é unha habilidade que debe ser acadada por calquera profesional veterinario que teña intención de traballar
na reprodución dos ruminantes. Alcanzar soltura nesta técnica pode abrir un gran número de portas no ámbito laboral.
Tal e como figura na guía docente da materia, “a función desta disciplina é achegar coñecementos e destrezas relacionadas coa reprodución dos animais domésticos, dende dous puntos de vista: o
clínico asistencial e o da produción animal. Así, a reprodución constitúe a base de todo proceso produtivo xa sexa dun xeito directo (carne, ovos), ou indirecto (leite)”. Non podemos esquecer, que a práctica clínica tradicional está a ser substituída nas especies de renda pola chamada medicina da
produción, dentro da cal a reprodución xoga un papel moi destacado.
Por todo isto, unha parte moi importante da actividade profesional dos futuros licenciados en veterinaria estará centrada en conseguir que os animais se reproduzan e, ademais, o fagan dun xeito eficiente para garantira súa rendibilidade económica.
Debemos ter en conta que os coñecementos e destrezas adquiridos nesta materia ó longo do curso permitirán diagnosticar e tratar
problemas relacionados coa reprodución animal, así como mellorar o rendemento reprodutivo dos animais domésticos e aumentar a rendibilidade produtiva das explotacións gandeiras.Universidade de Santiago de Compostela. Servizo de Normalización Lingüístic
Comparative Analysis of Greedy Pursuits for the Order Reduction of Wideband Digital Predistorters
This paper provides a review of greedy pursuits for optimizing Volterra-based behavioral models structure and estimating its parameters. An experimental comparison of the digital predistortion (DPD) linearization performance achieved by these approaches for model-order reduction, such as compressive sampling matching pursuit (CoSaMP), subspace pursuit (SP), orthogonal matching pursuit (OMP), and the novel doubly OMP (DOMP), is presented. A benchmark of the techniques in the DPD of a commercial class AB power amplifier (PA) and a class J PA operating over a 15-MHz Long-Term Evolution (LTE) signal is presented, giving a clear overview of their pruning characteristics in terms of linearization indicators and regressor selection capabilities. In addition, the benchmark is run in a cross-validation scheme by identifying the DPD with a 30-MHz 5G-new radio (NR) signal and validating with the same signal and a 20-MHz multicarrier wideband code division multiple access (WCDMA) signal. The DOMP is shown to be a promising technique since it achieves an enhanced model-order reduction for a similar linearization performance and precision
A bivariate volterra series model for the design of power amplifier digital predistorters
(This article belongs to the Special Issue Energy-Efficient Wireless Communication Systems)The operation of the power amplifier (PA) in wireless transmitters presents a trade-off
between linearity and power efficiency, being more efficient when the device exhibits the highest
nonlinearity. Its modeling and linearization performance depend on the quality of the underlying
Volterra models that are characterized by the presence of relevant terms amongst the enormous
amount of regressors that these models generate. The presence of PA mechanisms that generate
an internal state variable motivates the adoption of a bivariate Volterra series perspective with the
aim of enhancing modeling capabilities through the inclussion of beneficial terms. In this paper, the
conventional Volterra-based models are enhanced by the addition of terms, including cross products
of the input signal and the new internal variable. The bivariate versions of the general full Volterra
(FV) model and one of its pruned versions, referred to as the circuit-knowledge based Volterra (CKV)
model, are derived by considering the signal envelope as the internal variable and applying the
proposed methodology to the univariate models. A comparative assessment of the bivariate models
versus their conventional counterparts is experimentally performed for the modeling of two PAs
driven by a 30 MHz 5G New Radio signal: a class AB PA and a class J PA. The results for the digital
predistortion of the class AB PA under a direct learning architecture reveal the benefits in linearization
performance produced by the bivariate CKV model structure compared to that of the univariate
CKV model.Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación TEC2017-82807-PFondo Europeo de Desarrollo Regiona
On the Optimum Number of Coefficients of Sparse Digital Predistorters: A Bayesian Approach
This work presents insights on the application of the Bayesian information criterion (BIC) to fix the optimum number of coefficients in the Volterra series applied to the modeling and linearization of power amplifiers (PAs). The BIC is transformed from a rule to be applied after selection techniques to a stopping criterion, which enables the halting of the algorithm when a condition is reached. This study reveals that the BIC is equivalent to allow a certain identification normalized mean square error (NMSE) decrease after the inclusion of a model component. Experimental results of the digital predistortion of a class J PA are provided, demonstrating the proposal applicability in the attaining of the optimum number of coefficients. A comparison is made between the results obtained when the stopping rule is applied to the hill climbing (HC) and the doubly orthogonal matching pursuit (DOMP) algorithms
An Upgraded Dual-Band Digital Predistorter Model for Power Amplifiers Linearization
Digital predistortion (DPD) based on Volterra models is commonly employed to counteract the nonlinear distortion of power amplifiers. However, when concurrent dual-band signals are transmitted, 2-D DPD models are required. In this work, upgrading of a standard dual-band model is proposed and justified using multinomial theorem. The linearization performance of the current proposal has been compared to the unextended model. Fifth generation (5G) New Radio signals have been generated to compose a dual-band signal, which later was employed as input signal at Chalmers University of Technology's RF WebLab. Using coefficient selection techniques, the most relevant regressors are shown, and the importance of the new extension is proven. Linearization results highlight the benefits of this proposal.Comisión Europea, Fondo Europeo de Desarrollo RegionalMinisterio de Economía y Competitividad TEC2017-82807-
Formal deduction of a Volterra series model for complex-valued systems
This paper demonstrates a general model for nonlinear systems with complex-valued inputs and its application to communication systems modeling. Based on Wirtinger calculus and a double Volterra series approach, the proposed representation can also be considered as a generalization of the widely linear transformation to incorporate the description of nonlinear systems. The complete structure is pruned with the assistance of a compressive-sensing algorithm in order to reduce the number of parameters. To illustrate this approach, it has been experimentally implemented to model a transmitter for OFDM signals, which includes an I/Q modulator and a power amplifier.Ministerio de Economía y Competitividad TEC2014-53103-P
Digital predistortion of power amplifiers using structured compressed-sensing Volterra series
Digital predistortion has become an attractive technique for power amplifier linearisation whose limiting factor for using Volterra series as the underlying model is its computational complexity, since the number of components rapidly grows with the non-linear order and memory. Based on a previous reference algorithm, which consists on applying the orthogonal matching pursuit for the sorting of the model components and a Bayesian information criterion for the selection of the optimum number of components, a new technique to reduce the size of the support set taking into account the structural information within a model is presented. Experimental results of the predistortion of a commercial power amplifier are given as a proof of its capabilities, showing equivalent performance to the pruning with the reference algorithm while further reducing the number of components.Ministerio de Economía y Competitividad TEC2011-23559 TEC2014-53103-
A Sparse-Bayesian Approach for the Design of Robust Digital Predistorters Under Power-Varying Operation
"Early access"In this article, a sparse-Bayesian treatment is
proposed to solve the crucial questions posed by power amplifier
(PA) and digital predistorter (DPD) modeling. To learn a
model, the advanced Bayesian framework includes a group of
specific processes that maximize the likelihood of the measured
data: regressor pursuit and identification, coefficient estimation,
stopping criterion, and regressor deselection. The relevance
vector machine (RVM) method is reformulated theoretically to
be implemented in complex-valued linear regression. In essence,
given an initial set of candidate regressors, the result of this
sparse-Bayesian learning approach is the most likely model.
Experimental results are provided for the linearization of class
AB and class J PAs driven by a 30-MHz fifth-generation new
radio signal for a fixed average power, where the evolution of
the figures of merit versus the number of active coefficients
is examined for the proposed sparse-Bayesian pursuit (SBP)
algorithm in comparison to other greedy algorithms. The SBP
presents a good performance in terms of linearization capabilities
and computational cost. Furthermore, the proposed Bayesian
framework enabled the design of a DPD model structure,
deselect regressors, and readjust coefficients in a direct learning
architecture, demonstrating the robustness to changes in the
power level over a 10-dB range.Ministerio de Ciencia e Innovación 10.13039/501100011033Junta de Andalucía - Fondos FEDER US-126499
Sparse identification of volterra models for power amplifiers without pseudoinverse computation
Article number 9178996We present a new formulation of the doubly orthogonal matching pursuit (DOMP) algorithm for the sparse recovery of Volterra series models. The proposal works over the covariance matrices by taking advantage of the orthogonal properties of the solution at each iteration and avoids the calculation of the pseudoinverse matrix to obtain the model coefficients. A detailed formulation of the algorithm is provided along with a computational complexity assessment, showing a fixed complexity per iteration compared with its previous versions in which it depends on the iteration number. Moreover, we empirically demonstrate the reduction in computational complexity in terms of runtime and highlight the pruning capabilities through its application to the digital predistortion of a class J power amplifier operating under 5G-NR signals with the bandwidth of 20 and 30 MHz, concluding that this proposal significantly outperforms existing techniques in terms of computational complexity
Transmitter Linearization Adaptable to Power-Varying Operation
This paper presents the design of a power-scalable digital predistorter (DPD) for transmitter architectures. The target is to accomplish the joint compensation of impairments due to the I/Q modulator and nonlinearities associated with the power amplifier, and procure a maintained linearization performance in a range of average working operation levels. The identification method for the linearizer parameters enriches the standard least-squares procedure with a synergistic integration with sparsity-based model pruning strategies. The method has been tested with a general complex-valued Volterra model applied to the linearization of two communications transmitters operating at 3.6 GHz. The linearizers designed for the two transmitters effectively provide the joint compensation of the nonlinear behavior. In addition to their good performance in terms of adjacent channel power ratio, the DPDs exhibit a wide range of power-varying adaptation.Comisión Interministerial de Ciencia y Tecnología (CICYT) TEC2014-53103-
- …