Numerical modelling of oil spill in inland waters

Water Qualit

Optimization of microstructural evolution during laser cladding of Ni based powder on GCI glass molds

International audienceIn the glass industry, laser cladding is an innovative surfacing technique of depositing a layer of nickel to protect glass mold against corrosion, abrasion and thermal fatigue. This method (powder fusion by projection), well known in additive manufacturing represents a real technological leap for the glass industry. However, during laser cladding of Ni-based powder on gray cast iron, cracks can be observed for some process conditions. These cracks are often due to the Heat Affected Zone which creates structural stresses linked to the development of a martensitic structure in the ferritic matrix of the lamellar graphite cast iron. The aim of this work is to observe the impact of laser cladding (without substrate pre-heating usually used to limit cracking) on coating behavior but also on flake-graphite cast iron substrates. The microstructure and the mechanical properties were studied around the interface cladding/substrate. The impact of the processing parameters (power P, scanning speed v and powder feeding rate PFR was studied by using the ANOVA (ANalysis Of VAriance) technique. It has been observed that laser cladding on graphite cast iron without cracking is possible by limiting the linear energy induced by the process. Optimization of the processing parameters in order to obtain the industrial expected geometry of the coating has also been proposed

Study of the microstructure and texture heterogeneities of Fe–48wt%Ni alloy severely deformed by equal channel angular pressing

International audienceA Fe-48wt%Ni alloy was processed by severe plastic deformation using equal channel angular pressing process. A stacking of 9 sheets was introduced and pressed up to two passes into die with an inner angles of Φ=90º and outer arc of curvature ψ= 17° at room temperature following route A. The same material in bulk form was also ECAPed up to one pass. The microstructure and the texture were investigated by means of electron backscattered diffraction and X-ray diffraction, respectively. To evaluate the mechanical response, Vickers microhardness was carried out. The given analyses concern the as-received sample, the peripheral and the central plates of the pressed stacks and the upper, the middle and the lower parts of the pressed bulk material. The deformation was heterogeneous and variations in texture and microstructure, resulting from different efficiencies in the shearing process, were locally noted. For the stacks samples, the microstructure evolved from equiaxed grains of 9 μm with high fraction of high-angle grain boundaries (around 90%) to a heterogeneous fine grain structure with an average grain size of 3 m after two passes. On the contrary, for the bulk sample, the evolution wa

Recrystallization and grain growth at the interface of a bimetallic colaminated strip composed of two different Fe-Ni alloys

International audienceRoll bonding is a solid-state welding process widely used to manufacture layered metal composites. Particular properties may thus be obtained using the physical features of each material of the composite. Bimetal plates consisting of two different Fe-Ni alloys were made by roll bonding followed by heat treatment for 90 minutes at various annealing temperatures. The effects of post-rolling heat treatments on the bonding strength of a bimetal strip were investigated in relation to the interface microstructure evolution. Both recrystallization and grain growth took place at the interface during annealing. In particular, nucleation of new grains as well as growing grains crossing the interface may have contributed to the improvement of the bonding strength. Moreover, diffusion through the interface was found to drastically enhance the bonding strength from 850°C up to 1050°C. However, excessive grain growth associated to porosity occurrence probably caused the saturation of the bonding strength beyond 1050°C

Microstructure, Texture, and Mechanical Properties of Ni-W Alloy After Accumulative Roll Bonding

International audienceIn this study, the microstructure, texture, and mechanical properties evolution of Ni-14W (wt. %) alloy processed up to four cycles of accumulative roll-bonding (ARB) were investigated using electron backscatter diffraction, microhardness measurements, and tensile tests. The initial equiaxed grains, with an average size of 10 μm, underwent a strong refinement after ARB processing. The elongated ultrafine grains were parallel to the rolling direction, with a grain thickness of 0.2 µm. The texture after ARB processing was characterized by the typical rolling components (Copper, S and Brass), which showed a tendency toward stabilization after four cycles. The microhardness increased substantially (+86%) and seemed to saturate after three cycles. The tensile tests demonstrated that Ni-14W samples subjected to ARB processing exhibited high strength (> 1200 MPa after three ARB cycles) and very poor ductility

Microstructural Evolutions and Mechanical Properties of Drawn Medium Carbon Steel Wire

International audienceThis study focuses on the evolution in the microstructure, texture and mechanical properties of medium carbon steel wires obtained by wire drawing at Tréfissoud Company for the manufacturing of the spring mattress. Wire drawing induces elongation of grains in the direction of drawing with the development of the fibre texture parallel to the wire axis. Kinking and bending of cementite lamellae were observed during the drawing process. The work was carried out respectively on three states, wire rod and drawn states for two different amounts (ε %=43,6 and 60 %), using the optical and SEM microscopy, electron backscatter diffraction and X-ray diffraction analysis for examination of the microstructure and texture evolution, the hardness Vickers and tensile test to follow the curing of the studied wires

A multi-center, open-label trial to compare the efficacy and pharmacokinetics of Artemether-Lumefantrine in children with severe acute malnutrition versus children without severe acute malnutrition: study protocol for the MAL-NUT study

BACKGROUND:Malnutrition and malaria frequently coexist in sub-Saharan African countries. Studies on efficacy of antimalarial treatments usually follow the WHO standardized protocol in which severely malnourished children are systematically excluded.Few studies have assessed the efficacy of chloroquine, sulfadoxine-pyrimethamine and quinine in severe acute malnourished children. Overall, efficacy of these treatments appeared to be reduced, attributed to lower immunity and for some antimalarials altered pharmacokinetic profiles and lower drug concentrations. However, similar research on the efficacy and pharmacokinetic profiles of artemisinin-combination therapies (ACTs) and especially artemether-lumefantrine in malnourished children is currently lacking.The main objective of this study is to assess whether artemether-lumefantrine is less efficacious in children suffering from severe acute malnutrition (SAM) compared to non-SAM children, and if so, to what extent this can be attributed to a sub-optimal pharmacokinetic profile.METHODS/DESIGN:In two sites, Ouelessebougou, Mali and Maradi, Niger, children with uncomplicated microscopically-confirmed P. falciparum malaria aged between 6 and 59 months will be enrolled. Two non-SAM children will be enrolled after the enrolment of each SAM case. Children with severe manifestations of malaria or complications of acute malnutrition needing intensive treatment will be excluded.Treatment intakes will be supervised and children will be followed-up for 42 days, according to WHO guidance for surveillance of antimalarial drug efficacy. Polymerase Chain Reaction genotyping will be used to distinguish recrudescence from re-infection. SAM children will also benefit from the national nutritional rehabilitation program.Outcomes will be compared between the SAM and non-SAM populations. The primary outcome will be adequate clinical and parasitological response at day 28 after PCR correction, estimated by Kaplan-Meier analysis. To assess the pharmacokinetic profile of lumefantrine, a sparse sampling approach will be used with randomized allocation of sampling times (5 per child). A total of 180 SAM children and 360 non-SAM children will be recruited during the 2013 and 2014 malaria seasons.DISCUSSION:This study will provide important information that is currently lacking on the effect of SAM on therapeutic efficacy and pharmacokinetic profile of artemether-lumefantrine. If it shows lower therapeutic efficacy and decreased lumefantrine concentrations, it would inform dose optimization studies in SAM children.TRIAL REGISTRATION:ClinicalTrials.gov: NCT0195890

Inhaled Nitric Oxide as an Adjunctive Treatment for Cerebral Malaria in Children: A Phase II Randomized Open-Label Clinical Trial

Background. Children with cerebral malaria (CM) have high rates of mortality and neurologic sequelae. Nitric oxide (NO) metabolite levels in plasma and urine are reduced in CM. Methods. This randomized trial assessed the efficacy of inhaled NO versus nitrogen (N2) as an adjunctive treatment for CM patients receiving intravenous artesunate.We hypothesized that patients treated with NO would have a greater increase of the malaria biomarker, plasma angiopoietin-1 (Ang-1) after 48 hours of treatment. Results. Ninety-two children with CM were randomized to receive either inhaled 80 part per million NO or N2 for 48 or more hours. Plasma Ang-1 levels increased in both treatment groups, but there was no difference between the groups at 48 hours (P = not significant [NS]). Plasma Ang-2 and cytokine levels (tumor necrosis factor-α, interferon- γ, interleukin [IL]-1β, IL-6, IL-10, and monocyte chemoattractant protein-1) decreased between inclusion and 48 hours in both treatment groups, but there was no difference between the groups (P = NS). Nitric oxide metabolite levels—blood methemoglobin and plasma nitrate—increased in patients treated with NO (both P \u3c .05). Seven patients in the N2 group and 4 patients in the NO group died. Five patients in the N2 group and 6 in the NO group had neurological sequelae at hospital discharge. Conclusions. Breathing NO as an adjunctive treatment for CM for a minimum of 48 hours was safe, increased blood methemoglobin and plasma nitrate levels, but did not result in a greater increase of plasma Ang-1 levels at 48 hours

Haematological consequences of acute uncomplicated falciparum malaria: a WorldWide Antimalarial Resistance Network pooled analysis of individual patient data

Background: Plasmodium falciparum malaria is associated with anaemia-related morbidity, attributable to host, parasite and drug factors. We quantified the haematological response following treatment of uncomplicated P. falciparum malaria to identify the factors associated with malarial anaemia. Methods: Individual patient data from eligible antimalarial efficacy studies of uncomplicated P. falciparum malaria, available through the WorldWide Antimalarial Resistance Network data repository prior to August 2015, were pooled using standardised methodology. The haematological response over time was quantified using a multivariable linear mixed effects model with nonlinear terms for time, and the model was then used to estimate the mean haemoglobin at day of nadir and day 7. Multivariable logistic regression quantified risk factors for moderately severe anaemia (haemoglobin < 7 g/dL) at day 0, day 3 and day 7 as well as a fractional fall ≥ 25% at day 3 and day 7. Results: A total of 70,226 patients, recruited into 200 studies between 1991 and 2013, were included in the analysis: 50,859 (72.4%) enrolled in Africa, 18,451 (26.3%) in Asia and 916 (1.3%) in South America. The median haemoglobin concentration at presentation was 9.9 g/dL (range 5.0–19.7 g/dL) in Africa, 11.6 g/dL (range 5.0–20.0 g/dL) in Asia and 12.3 g/dL (range 6.9–17.9 g/dL) in South America. Moderately severe anaemia (Hb < 7g/dl) was present in 8.4% (4284/50,859) of patients from Africa, 3.3% (606/18,451) from Asia and 0.1% (1/916) from South America. The nadir haemoglobin occurred on day 2 post treatment with a mean fall from baseline of 0.57 g/dL in Africa and 1.13 g/dL in Asia. Independent risk factors for moderately severe anaemia on day 7, in both Africa and Asia, included moderately severe anaemia at baseline (adjusted odds ratio (AOR) = 16.10 and AOR = 23.00, respectively), young age (age < 1 compared to ≥ 12 years AOR = 12.81 and AOR = 6.79, respectively), high parasitaemia (AOR = 1.78 and AOR = 1.58, respectively) and delayed parasite clearance (AOR = 2.44 and AOR = 2.59, respectively). In Asia, patients treated with an artemisinin-based regimen were at significantly greater risk of moderately severe anaemia on day 7 compared to those treated with a non-artemisinin-based regimen (AOR = 2.06 [95%CI 1.39–3.05], p < 0.001). Conclusions: In patients with uncomplicated P. falciparum malaria, the nadir haemoglobin occurs 2 days after starting treatment. Although artemisinin-based treatments increase the rate of parasite clearance, in Asia they are associated with a greater risk of anaemia during recovery