664 research outputs found
Influence of model resolution on spatial and temporal variability of clouds and precipitation over Germany
Importance of aerosols and shape of the cloud droplet size distribution for convective clouds and precipitation
The predictability of deep moist convection is subject to large uncertainties resulting from inaccurate initial and boundary data, the incomplete description of physical processes, or microphysical uncertainties. In this study, we investigate the response of convective clouds and precipitation over central Europe to varying cloud condensation nuclei (CCN) concentrations and different shape parameters of the cloud droplet size distribution (CDSD), both of which are not well constrained by observations. We systematically evaluate the relative impact of these uncertainties in realistic convection-resolving simulations for multiple cases with different synoptic controls using the new icosahedral non-hydrostatic ICON model. The results show a large systematic increase in total cloud water content with increasing CCN concentrations and narrower CDSDs, together with a reduction in the total rain water content. This is related to a suppressed warm-rain formation due to a less efficient collisionâcoalescence process. It is shown that the evaporation at lower levels is responsible for diminishing these impacts on surface precipitation, which lies between +13â% and â16â% compared to a reference run with continental aerosol assumption. In general, the precipitation response was larger for weakly forced cases. We also find that the overall timing of convection is not sensitive to the microphysical uncertainties applied, indicating that different rain intensities are responsible for changing precipitation totals at the ground. Furthermore, weaker rain intensities in the developing phase of convective clouds can allow for a higher convective instability at later times, which can lead to a turning point with larger rain intensities later on. The existence of such a turning point and its location in time can have a major impact on precipitation totals. In general, we find that an increase in the shape parameter can produce almost as large a variation in precipitation as a CCN increase from maritime to polluted conditions. The narrowing of the CDSD not only decreases the absolute values of autoconversion and accretion but also decreases the relative role of the warm-rain formation in general, independent of the prevailing weather regime.
We further find that increasing CCN concentrations reduce the effective radius of cloud droplets in a stronger manner than larger shape parameters. The cloud optical depth, however, reveals a similarly large increase with larger shape parameters when changing the aerosol load from maritime to polluted. By the frequency of updrafts as a function of height, we show a negative aerosol effect on updraft strength, leading to an enervation of deep convection. These findings demonstrate that both the CCN assumptions and the CDSD shape parameter are important for quantitative precipitation forecasting and should be carefully chosen if double-moment schemes are used for modeling aerosolâcloud interactions
Spatial and temporal variability of clouds and precipitation over Germany: multiscale simulations across the "gray zone"
This paper assesses the resolution dependance of clouds and precipitation over Germany by numerical simulations with the COnsortium for Small-scale MOdeling (COSMO) model. Six intensive observation periods of the HOPE (HD(CP)2 Observational Prototype Experiment) measurement campaign conducted in spring 2013 and one summer day of the same year are simulated. By means of a series of grid-refinement resolution tests (horizontal grid spacing 2.8, 1 km, 500 and 250 m), the applicability of the COSMO model to real weather events in the terra incognita, i. e. the scale ranging between the mesoscale limit (no turbulence resolved) and the large-eddy simulation limit (energy-containing turbulence resolved), is tested. It is found that although the representation of a number of processes is enhanced with resolution (e. g. boundary-layer thermals, low-level convergence zones, gravity waves), their influence on the temporal evolution of precipitation is rather weak. However, rain intensities may vary with resolution, leading to differences in the total rain amount of up to +48 %. Furthermore, the location of rain is similar for the springtime cases with moderate and strong synoptic forcing, whereas significant differences are obtained for the summertime case with air mass convection. Probability density functions of convection-related parameters are analyzed to investigate their dependance on model resolution and their impact on cloud formation and subsequent precipitation
The effect of secondary ice production parameterization on the simulation of a cold frontal rainband
Secondary ice production via processes like rime splintering, frozen droplet shattering, and breakup upon ice hydrometeor collision have been proposed to explain discrepancies between in-cloud ice crystal and ice-nucleating particle numbers. To understand the impact of this additional ice crystal generation on surface precipitation, we present one of the first studies to implement frozen droplet shattering and iceâice collisional breakup parameterizations in a mesoscale model. We simulate a cold frontal rainband from the Aerosol Properties, PRocesses, And InfluenceS on the Earth\u27s Climate campaign and investigate the impact of the new parameterizations on the simulated ice crystal number concentrations (ICNC) and precipitation. Near the convective regions of the rainband, contributions to ICNC can be as large from secondary production as from primary nucleation, but ICNCs greater than 50Lâ1 remain underestimated by the model. The addition of the secondary production parameterizations also clearly intensifies the differences in both accumulated precipitation and precipitation rate between the convective towers and non-convective gap regions. We suggest, then, that secondary ice production parameterizations be included in large-scale models on the basis of large hydrometeor concentration and convective activity criteria
Porous materials show superhydrophobic to superhydrophilic switching
Switching between superhydrophobicity and superhydrophilicity in porous materials was predicted theoretically and demonstrated experimentally with the example of thermally induced contact angle change; tunability of this system was also demonstrated
Efficiency of self-cleaning properties in wheat (Triticum aestivum L.)
An experimental study was carried out to assess the efficiency of self-cleaning properties of three wheat cultivars and their potential in the protection against Blumeria graminis f. sp. tritici, a fungus that causes powdery mildew. Leaf samples with intact epicuticular structure were compared to such with wiped wax crystals. Contact angles were determined and the surfaces were subjected to a standardized contamination test with hydrophobic fluorescence powder. Another set of samples was inoculated with conidia of B. graminis and, after various time intervals, exposed to artificial fog or rain. For the intact surfaces of all cultivars contact angles of about 165° were measured. It is therefore suggested that wheat should be termed superhydrophobic. The wiping of the wax crystals led to a significant decrease of contact angles. This fact underlines the importance of surface roughness for achieving extreme water-repellency. In the standardized contamination test significantly more particles remained on the wiped surfaces than on those who had been left intact. This result was ascribed to increased adhesion on the smoothed samples.The inoculation with subsequent precipitation revealed a significantly better removal effect of conidia from intact than from wiped surfaces. This was irrespective of the wheat cultivar. In general, conidia were more effectively removed by rain than by fog. This was probably due to the higher kinetic energy and the greater amount of water when using rain. If fog application was delayed by 3 hours a higher percentage of conidia remained on the surface. As possible causes are discussed increased adhesion by conidia secretions or the development of primary germ tubes.Despite its highly efficient self-cleaning properties proved here, wheat is frequently infected by Blumeria graminis. We conclude that the high water content of the mildew conidia, the ability of Blumeria graminis to germinate at very low humidities and its rapid irreversible adhesion are effective adaptations in order to overcome the barrier of a superhydrophobic self-cleaning surface
Passive water control at the surface of a superhydrophobic lichen
Some lichens have a super-hydrophobic upper surface, which repels water drops, keeping the surface dry but probably preventing water uptake. Spore ejection requires water and is most efficient just after rainfall. This study was carried out to investigate how super-hydrophobic lichens manage water uptake and repellence at their fruiting bodies, or podetia. Drops of water were placed onto separate podetia of Cladonia chlorophaea and observed using optical microscopy and cryo-scanning-electron microscopy (cryo-SEM) techniques to determine the structure of podetia and to visualise their interaction with water droplets. SEM and optical microscopy studies revealed that the surface of the podetia was constructed in a three-level structural hierarchy. By cryo-SEM of water-glycerol droplets placed on the upper part of the podetium, pinning of the droplet to specific, hydrophilic spots (pycnidia/apothecia) was observed. The results suggest a mechanism for water uptake, which is highly sophisticated, using surface wettability to generate a passive response to different types of precipitation in a manner similar to the Namib Desert beetle. This mechanism is likely to be found in other organisms as it offers passive but selective water control
Stable water isotopes as a tool to investigate tropospheric moisture transport pathways over the eastern subtropical North Atlantic
Cross-validation of IASI/MetOp derived tropospheric ÎŽD with TES and ground-based FTIR observations
International audienceThe Infrared Atmospheric Sounding Interferometer (IASI) flying on-board MetOpA and MetOpB is able to capture fine isotopic variations of the HDO to H2O ratio (ÎŽD) in the troposphere. Such observations at the high spatio temporal resolution of the sounder are of great interest to improve our understanding of the mechanisms controlling humidity in the troposphere. In this study we aim to empirically assess the validity of our error estimation previously evaluated theoretically. To achieve this, we compare IASI ÎŽD retrieved profiles with other available profiles of ÎŽD, from the TES infrared sounder onboard AURA and from three ground-based FTIR stations produced within the MUSICA project: the NDACC (Network for the Detection of Atmospheric Composition Change) sites Kiruna and Izana, and the TCCON site Karlsruhe, which in addition to near-infrared TCCON spectra also records mid-infrared spectra. We describe the achievable level of agreement between the different retrievals and show that these theoretical errors are in good agreement with empirical differences. The comparisons are made at different locations from tropical to Arctic latitudes, above sea and above land. Generally IASI and TES are similarly sensitive to ÎŽD in the free troposphere which allows to compare their measurements directly. At tropical latitudes where IASI's sensitivity is lower than that of TES, we show that the agreement improves when taking into account the sensitivity of IASI in the TES retrieval. For the comparison IASI-FTIR only direct comparisons are performed because of similar sensitivities. We identify a quasi negligible bias in the free troposphere (â3â°) between IASI retrieved ÎŽD with the TES one, which are bias corrected, but an important with the ground-based FTIR reaching â47â°. We also suggest that model-satellite observations comparisons could be optimized with IASI thanks to its high spatial and temporal sampling
Empirical validation and proof of added value of MUSICA\u27s tropospheric ÎŽD remote sensing products
- âŠ