Moneta del comune e reddito sociale garantito

article publié sur le site culturel http://www.uninomade.org/L'ambizione di quest'articolo è quella di gettare le basi per una concezione della moneta del comune a partire da un'interrogazione omessa dalla teoria economica dei beni comuni. Quali sono, dunque, le condizioni capaci di attenuare il vincolo monetario al rapporto salariale e di favorire così lo sviluppo di forme di produzione alternative ai principi d'organizzazione sia del pubblico che del privato? Questa domanda richiede d'introdurre nella teoria del Comune il ruolo strutturante della moneta nei rapporti capitale-lavoro. L'esame del rapporto tra moneta e comune necessita, di conseguenza, di partire da una critica della teoria dei beni comuni dalla quale la moneta, come il lavoro, sono curiosamente assenti. La ragione di quest'assenza si trova nel fatto che questa concezione naturalista dei beni comuni accetta implicitamente uno dei postulati fondatori della teoria economica standard, ovvero la neutralità della moneta, concepita come un semplice strumento tecnico che facilita gli scambi, e non come la cristallizzazione di un rapporto sociale di potere. Su questa base, si tratterà di caratterizzare un approccio dinamico del comune al singolare nel quale la questione della moneta e delle mutazioni della divisione del lavoro occupa un posto centrale. Questo approccio fondato sulla triade lavoro-moneta-plusvalore servirà allora egualmente da filo conduttore per rianimare la controversia che aveva opposto Marx ai proudhoniani, precursori di un approccio della moneta come comune. Infine, fonderemo il nostro ragionamento sulle teorie marxiane del circuito per mostrare che il carattere specificamente monetario del rapporto capitale-lavoro costituisce l'unico punto di partenza adeguato per una riflessione sulla moneta del comune. Questa riflessione farà emergere perché la nozione di reddito sociale garantito corrisponde ad un'istituzione del comune volta a rendere la creazione monetaria endogena non solo al capitale ma anche alla riproduzione autonoma della forza lavoro

Imaging an acoustic waveguide from surface data in the time domain

International audienceThis paper deals with an inverse scattering problem in an acoustic waveguide. The data consist of time domain signals given by sources and receivers located on the boundary of the waveguide. After transforming the data to the frequency domain, the obstacle is then recovered by using a modal formulation of the Linear Sampling Method. The impact of many parameters are analyzed, such as the numbers of sources/receivers and the distance between them, the time shape of the incident wave and the number and the values of the frequencies that are used. Some numerical experiments illustrate such analysis

Iterative methods for scattering problems in isotropic or anisotropic elastic waveguides

International audienceWe consider the time-harmonic problem of the diffraction of an incident propagative mode by a localized defect, in an infinite straight isotropic elastic waveguide. We propose several iterative algorithms to compute an approximate solution of the problem, using a classical finite element discretization in a small area around the perturbation, and a modal expansion in unbounded straight parts of the guide. Each algorithm can be related to a so-called domain decomposition method, with or without an overlap between the domains. Specific transmission conditions are used, so that only the sparse finite element matrix has to be inverted, the modal expansion being obtained by a simple projection, using the Fraser bi-orthogonality relation. The benefit of using an overlap between the finite element domain and the modal domain is emphasized, in particular for the extension to the anisotropic case. The transparency of these new boundary conditions is checked for two- and three-dimensional anisotropic waveguides. Finally, in the isotropic case, numerical validation for two- and three-dimensional waveguides illustrates the efficiency of the new approach, compared to other existing methods, in terms of number of iterations and CPU time

Enhancement of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) accumulation in Arxula adeninivorans by stabilization of production

Background: In recent years the production of biobased biodegradable plastics has been of interest of researchers partly due to the accumulation of non-biodegradable plastics in the environment and to the opportunity for new applications. Commonly investigated are the polyhydroxyalkanoates (PHAs) poly(hydroxybutyrate) and poly(hydroxybutyrate-co-hydroxyvalerate) (PHB-V). The latter has the advantage of being tougher and less brittle. The production of these polymers in bacteria is well established but production in yeast may have some advantages, e.g. the ability to use a broad spectrum of industrial by-products as a carbon sources. Results: In this study we increased the synthesis of PHB-V in the non-conventional yeast Arxula adeninivorans by stabilization of polymer accumulation via genetic modification and optimization of culture conditions. An A. adeninivorans strain with overexpressed PHA pathway genes for β-ketothiolase, acetoacetyl-CoA reductase, PHAs synthase and the phasin gene was able to accumulate an unexpectedly high level of polymer. It was found that an optimized strain cultivated in a shaking incubator is able to produce up to 52.1% of the DCW of PHB-V (10.8gL-1) with 12.3%mol of PHV fraction. Although further optimization of cultivation conditions in a fed-batch bioreactor led to lower polymer content (15.3% of the DCW of PHB-V), the PHV fraction and total polymer level increased to 23.1%mol and 11.6gL-1 respectively. Additionally, analysis of the product revealed that the polymer has a very low average molecular mass and unexpected melting and glass transition temperatures. Conclusions: This study indicates a potential of use for the non-conventional yeast, A. adeninivorans, as an efficient producer of polyhydroxyalkanoates

Linear Sampling Method applied to Non Destructive Testing of an elastic waveguide: theory, numerics and experiments

International audienceThis paper presents an application of the Linear Sampling Method to ultrasonic Non Destructive Testing of an elastic waveguide. In particular, the NDT context implies that both the solicitations and the measurements are located on the surface of the waveguide and are given in the time domain. Our strategy consists in using a modal formulation of the Linear Sampling Method at multiple frequencies, such modal formulation being justified theoretically in [1] for rigid obstacles and in [2] for cracks. Our strategy requires the inversion of some emission and reception matrices which deserve some special attention due to potential ill-conditioning. The feasibility of our method is proved with the help of artificial data as well as real data

Arxula adeninivorans Recombinant Urate Oxidase and Its Application in the Production of Food with Low Uric Acid Content

Hyperuricemia and its symptoms are becoming increasingly common worldwide. Elevated serum uric acid levels are caused by increased uric acid synthesis from food constituents and reduced renal excretion. Treatment in most cases involves reducing alcohol intake and consumption of meat and fish or treatment with pharmaceuticals. Another approach could be to reduce uric acid level in food, either during production or consumption. This work reports the production of recombinant urate oxidase by Arxula adeninivorans and its application to reduce uric acid in a food product. The A. adeninivorans urate oxidase amino acid sequence was found to be similar to urate oxidases from other fungi (61-65% identity). In media supplemented with adenine, hypoxanthine or uric acid, induction of the urate oxidase (AUOX) gene and intracellular accumulation of urate oxidase (Auoxp) was observed. The enzyme characteristics were analyzed from isolates of the wild-type strain A. adeninivorans LS3, as well as from those of transgenic strains expressing the AUOX gene under control of the strong constitutive TEF1 promoter or the inducible AYNI1 promoter. The enzyme showed high substrate specificity for uric acid, a broad temperature and pH range, high thermostability and the ability to reduce uric acid content in food

Arxula adeninivorans Recombinant Guanine Deaminase and Its Application in the Production of Food with Low Purine Content

Purines of exogenous and endogenous sources are degraded to uric acid in human beings. Concentrations >6.8 mg uric acid/dl serum cause hyperuricemia and its symptoms. Pharmaceuticals and the reduction of the intake of purine-rich food are used to control uric acid levels. A novel approach to the latter proposition is the enzymatic reduction of the purine content of food by purine-degrading enzymes. Here we describe the production of recombinant guanine deaminase by the yeast Arxula adeninivorans LS3 and its application in food. In media supplemented with nitrogen sources hypoxanthine or adenine, guanine deaminase (AGDA) gene expression is induced and intracellular accumulation of guanine deaminase (Agdap) protein occurs. The characteristics of the guanine deaminase isolated from wild-type strain LS3 and a transgenic strain expressing the AGDA gene under control of the strong constitutive TEF1 promoter were determined and compared. Both enzymes were dimeric and had temperature optima of 55°C with high substrate specificity for guanine and localisation in both the cytoplasm and vacuole of yeast. The enzyme was demonstrated to reduce levels of guanine in food. A mixture of guanine deaminase and other purine degradation enzymes will allow the reduction of purines in purine-rich foods

Off-grid desalination for irrigation in the Jordan Valley

Groundwater resources in many regions of the world are becoming increasingly depleted and salinized. With many aquifers straddling political boundaries, on-going depletion presents both a flash-point for conflict and an opportunity for cooperation. A salient example is that of transboundary groundwater resources in the Jordan Valley. These are shared among Israeli, Jordanian and Palestinian residents. Here we describe a collaborative project aiming to develop a desalination system for use by Palestinian farmers in the West Bank. Students have collaborated across borders in a programme of training and research, in which they have constructed desalination prototypes. These are based on a simple but efficient batch-reverse osmosis (RO) technology that incorporates energy recovery and brine recirculation to achieve 70%–76% recovery and specific energy consumption <1.3 kWh/m 3. The technology can be solar powered with minimal PV footprint. Being built almost entirely from off-the-shelf parts, the system is readily implemented with levels of engineering expertise available in many areas of the world. To test and upscale the technology, and to propagate the knowledge about it, it is being trialled at centres in the UK, Israel and soon in Palestine. It is concluded that the project demonstrates a valuable approach in regions facing transboundary groundwater challenges, and that further learning resources should be developed for free access to foster collaboration across borders