Circle of Ramsey Greenway System

Report and posters completed by students enrolled in ARCH 3250: Community Design and Public Interest Architecture, taught by James Wheeler and LA 3002: Informants of Creating Landscape Space, taught by Jessica Rossi-Mastracci and Joe Favour in spring 2018.This project was completed as part of the 2017-2018 Resilient Communities Project (rcp.umn.edu) partnership with the City of Ramsey. The goal of this project was to examine the City of Ramsey’s current greenway system and propose changes and extensions to the system that make it easier to navigate and more efficient to use. Ramsey project lead Mark Riverblood collaborated with a team of students enrolled in James Wheeler’s ARCH 3250 course, and Jessica Rossi-Mastracci and Joe Favour’s LA 3002 course, to create conceptual designs and recommend specific improvements to the City’s greenway system. A final student report and posters from the project are available.This project was supported by the Resilient Communities Project (RCP), a program at the University of Minnesota whose mission is to connect communities in Minnesota with U of MN faculty and students to advance community resilience through collaborative, course-based projects. RCP is a program of the Center for Urban and Regional Affairs (CURA). More information at http://www.rcp.umn.edu

A novel bismuth-based metal-organic framework for high volumetric methane and carbon dioxide adsorption

Solvothermal reaction of H4L (L = biphenyl-3,3’,5,5’-tetracarboxylate) and Bi(NO3)3·(H2O)5 in a mixture of DMF/MeCN/H2O in the presence of piperazine and nitric acid at 100 oC for 10 h affords the solvated metal-organic polymer [Bi2(L)1.5(H2O)2]·(DMF)3.5·(H2O)3 (NOTT-220-solv). A single crystal X-ray structure determination confirms that it crystallises in space group P2/c and has a neutral and non-interpenetrated structure comprising binuclear {Bi2} centres bridged by tetracarboxylate ligands. NOTT-220-solv shows a 3,6-connected network having a new framework topology with a {4·62}2{42·65·88}{62·8} point symbol. The desolvated material NOTT-220a shows exceptionally high adsorption uptakes for CH4 and CO2 on a volumetric basis at moderate pressures and temperatures with a CO2 uptake of 553 gL-1 (20 bar, 293 K) with a saturation uptake of 688 gL-1 (1 bar, 195 K). The corresponding CH4 uptake of 165 V(STP)/V (20 bar, 293 K) and 189 V(STP/V) (35 bar, 293 K) is within the top three MOF materials under the same conditions, surpassed only by PCN-14 and Ni-MOF-74 (230 and 190 V(STP)/V 35 Bar, 298 K). The maximum CH4 uptake for NOTT-220a was recorded at 20 bar and 195 K to be 287 V(STP)/V, while H2 uptake of NOTT-220a at 20 bar, 77 K is 42 gL-1. These gas uptakes have been modelled by Grand Canonical Monte Carlo (GCMC) and Density Functional Theory (DFT) calculations, which confirm the experimental data and give insights into the nature of the binding sites of CH4 and CO2 in this porous hybrid material

High pressure studies of palladium and platinum thioether macrocyclic dihalide complexes

The mononuclear macrocyclic Pd(II) complex cis-[PdCl2([9 aneS3)] ([9]aneS3 = 1,4,7-trithiacyclononane) converts at 44 kbar into an intensely coloured chain polymer exhibiting distorted octahedral co-ordination at the metal centre and an unprecedented [1233] conformation for the thioether ligand. The evolution of an intramolecular axial sulphur metal interaction and an intermolecular equatorial sulfur-metal interaction is central to these changes. High pressure crystallographic experiments have also been undertaken on the related complexes [PtCl2([9]aneS3)], [PdBr2([9]aneS3)],[PtBr2([9]aneS3)], [PdI2([9]aneS3)] and [PtI2([9]aneS3)] in order to establish the effects of changing the halide ligands and the metal centre on the behaviour of these complexes under pressure. While all complexes undergo contraction of the various interaction distances with increasing pressure, only[PdCl2([9]aneS3)] undergoes a phase change. Pressure-induced I…I interactions were observed for [PdI2([9]aneS3)] and [PtI2([9]aneS3)] at 19 kbar but the corresponding Br…Br interactions in [PdBr2([9]aneS3)] and [PtBr2([9]aneS3)] only become significant at much higher pressure (58 kbar. Accompanying DFT calculations have yielded interaction energies and bond orders for the sulphur metal interactions

EPINEST, an agent-based model to simulate epidemic dynamics in large-scale poultry production and distribution networks

The rapid intensification of poultry production raises important concerns about the associated risks of zoonotic infections. Here, we introduce EPINEST (EPIdemic NEtwork Simulation in poultry Transportation systems): an agent-based modelling framework designed to simulate pathogen transmission within realistic poultry production and distribution networks. We provide example applications to broiler production in Bangladesh, but the modular structure of the model allows for easy parameterization to suit specific countries and system configurations. Moreover, the framework enables the replication of a wide range of eco-epidemiological scenarios by incorporating diverse pathogen life-history traits, modes of transmission and interactions between multiple strains and/or pathogens. EPINEST was developed in the context of an interdisciplinary multi-centre study conducted in Bangladesh, India, Vietnam and Sri Lanka, and will facilitate the investigation of the spreading patterns of various health hazards such as avian influenza, Campylobacter, Salmonella and antimicrobial resistance in these countries. Furthermore, this modelling framework holds potential for broader application in veterinary epidemiology and One Health research, extending its relevance beyond poultry to encompass other livestock species and disease systems

Microstructure Based Material-Sand Particulate Interactions and Assessment of Coatings for High Temperature Turbine Blades

Gas turbine engines for military/commercial fixed-wing and rotary wing aircraft use thermal barrier coatings in the high-temperature sections of the engine for improved efficiency and power. The desire to further make improvements in gas turbine engine efficiency and high power-density is driving the research and development of thermal barrier coatings and the effort of improving their tolerance to fine foreign particulates that may be contained in the intake air. Both commercial and military aircraft engines often are required to operate over sandy regions such as in the Middle-East nations, as well as over volcanic zones. For rotorcraft gas turbine engines, the sand ingestion is adverse during take-off, hovering near ground, and landing conditions. Although, most of the rotorcraft gas turbine engines are fitted with inlet particle separators, they are not 100 percent efficient in filtering fine sand particles of size 75 microns or below. The presence of these fine solid particles in the working fluid medium has an adverse effect on the durability of turbine blade thermal barrier coatings and overall performance of the engine. Typical turbine blade damages include blade coating wear, sand glazing, Calcia-Magnesia-Alumina-Silicate (CMAS) attack, oxidation, plugged cooling holes, all of which can cause rapid performance deterioration including loss of aircraft. The objective of this research is to understand the fine particle interactions with typical ceramic coatings of turbine blades at the microstructure level. A finite-element based microstructure modeling and analysis has been performed to investigate particle-surface interactions, and restitution characteristics. Experimentally, a set of tailored thermal barrier coatings and surface treatments were down-selected through hot burner rig tests and then applied to first stage nozzle vanes of the Gas Generator Turbine of a typical rotorcraft gas turbine engine. Laser Doppler velocity measurements were performed during hot burner rig testing to determine sand particle incoming velocities and their rebound characteristics upon impact on coated material targets. Further, engine sand ingestion tests were carried out to test the CMAS tolerance of the coated nozzle vanes. The findings from this on-going collaborative research to develop the next-gen sand tolerant coatings for turbine blades are presented in this paper

Improving teaching: Enhancing ways of being university teachers

My aim in this paper is to theorize my teaching in a course for experienced university teachers, in a context of increased attention to such courses. My focus in the course is transforming and enhancing ways of being university teachers, through integrating knowing, acting and being. In other words, epistemology is not seen as an end in itself, but rather it is in the service of ontology. In the paper, I explore and illustrate how this focus on ontology is enacted in the course

Furthering alternative cultures of valuation in higher education research

The value of higher education is often implicit or assumed in educational research. The underlying and antecedent premises that shape and influence debates about value remain unchallenged which perpetuates the dominant, but limiting, terms of the debate and fosters reductionism. I proceed on the premise that analyses of value are not self–supporting or self-referential but are embedded within prevailing cultures of valuation. I contend that challenging, and providing alternatives to, dominant narratives of higher education requires an appreciation of those cultures. I therefore highlight some of the existing cultures of valuation and their influence. I then propose Sayer’s concept of lay normativity as a culture of valuation and discuss how it translates into the practices of research into higher education, specifically the practice of analysis. I animate the discussion by detecting the presence of lay normativity in the evaluative space of the capability approach

Interfacial characteristics and microstructural evolution of ceramics exposed to high temperature sand laden combustion environments

Sand laden combustion environments are a current challenge plaguing ceramic thermal barrier coatings (TBCs) and environmental barrier coatings (EBCs) on metallic and emerging ceramic matrix composite (CMC) turbomachinery components. Exposure of thermal and environmental barrier coatings on ceramic matrix composites to environmental particulate laden deteriorates the ceramic structure via chemical reactions and infiltration into pore structures. The challenge of environmental particulates, collectively referred to as calcium-magnesium-aluminosilicate (CMAS), is expected to be exacerbated in future components that utilize ceramic matric composites (CMCs), since the higher operating temperatures will accelerate particulate melting, infiltration, and diffusion kinetics. This study first presents efforts at ARL to develop sandphobic coatings resistant to CMAS infiltration and deposition. The results of a recent full scale sand ingestion engine test used to evaluate several ARL layered and blended coating compositions are presented. The study also includes the evaluation of interactions of CMAS plasma sprayed environmental barrier coatings and HfO2-Si bond coats on SiC/SiC CMCs in rig simulated engine test conditions. The focus is on the microstructural evolution of the coatings and the interfacial characteristics between the TBCs and EBCs and CMAS. Interfaces between coating constituents are also of interest in order to tailor coatings with superior thermal, structural, and chemical characteristics. Controlled studies on YSZ-based ceramic compacts are also performed in order to gain a more fundamental understanding of the effect of porosity on infiltration kinetics, as well as the nature of interfaces and interfacial products wrought by CMAS infiltration into YSZ ceramic grain boundaries. These model studies on YSZ are conducted by immersing the ceramic compacts into AFRL-02 sand and exposing the system to temperatures of up to 1300 °C. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, electron back scattered diffraction, and focused ion beam (milling and imaging) are utilized for microstructural and interfacial characterization of the CMAS reacted thermal and environmental barrier coating systems

A paediatric bone index derived by automated radiogrammetry

Hand radiographs are obtained routinely to determine bone age of children. This paper presents a method that determines a Paediatric Bone Index automatically from such radiographs. The Paediatric Bone Index is designed to have minimal relative standard deviation (7.5%), and the precision is determined to be 1.42%. Introduction We present a computerised method to determine bone mass of children based on hand radiographs, including a reference database for normal Caucasian children. Methods Normal Danish subjects (1,867), of ages 7-17, and 531 normal Dutch subjects of ages 5-19 were included. Historically, three different indices of bone mass have been used in radiogrammetry all based on A = pi TW(1 - T/W), where T is the cortical thickness and W the bone width. The indices are the metacarpal index A/W-2, DXR-BMD=A/W, and Exton-Smith's index A/(WL), where L is the length of the bone. These indices are compared with new indices of the form A/((WLb)-L-a), and it is argued that the preferred index has minimal SD relative to the mean value at each bone age and sex. Finally, longitudinal series of X-rays of 20 Japanese children are used to derive the precision of the measurements. Results The preferred index is A/((WL0.33)-L-1.33), which is named the Paediatric Bone Index, PBI. It has mean relative SD 7.5% and precision 1.42%. Conclusions As part of the BoneXpert method for automated bone age determination, our method facilitates retrospective research studies involving validation of the proposed index against fracture incidence and adult bone mineral densit

Discovery and Characterization of 2-Anilino-4- (Thiazol-5-yl)Pyrimidine Transcriptional CDK Inhibitors as Anticancer Agents

The main difficulty in the development of ATP antagonist kinase inhibitors is target specificity, since the ATP-binding motif is present in many proteins. We introduce a strategy that has allowed us to identify compounds from a kinase inhibitor library that block the cyclin-dependent kinases responsible for regulating transcription, i.e., CDK7 and especially CDK9. The screening cascade employs cellular phenotypic assays based on mitotic index and nuclear p53 protein accumulation. This permitted us to classify compounds into transcriptional, cell cycle, and mitotic inhibitor groups. We describe the characterization of the transcriptional inhibitor class in terms of kinase inhibition profile, cellular mode of action, and selectivity for transformed cells. A structural selectivity rationale was used to optimize potency and biopharmaceutical properties and led to the development of a transcriptional inhibitor, 3,4-dimethyl-5-[2-(4-piperazin-1-yl-phenylamino)-pyrimidin-4-yl]-3H-thiazol-2-one, with anticancer activity in animal models