3,603 research outputs found

    Modelo de simulação de discos

    Get PDF
    Dissertação de mestrado em Engenharia InformáticaA simulação de componentes é uma importante ferramenta para o auxílio no desenvolvimento de sistemas, realização de testes e uma melhor compreensão acerca desses mesmos componentes por parte de investigadores e desenvolvedores. Esta pode ser realizada utilizando diferentes abordagens, mas tem de permitir uma reprodução fiável do ambiente. A presente dissertação assenta sobre uma plataforma já existente, o Minha. Esta plataforma permite simular sistemas distribuídos e é capaz de simular todas as interações entre várias máquinas ao nível da rede. Embora a plataforma seja capaz de realizar a simulação ao nível da rede, esta não era capaz de realizar qualquer simulação ao nível dos discos das máquinas simuladas, até à realização do dissertação. É este o problema que a presente dissertação se propõe resolver, criando um módulo que realize a intercepção das operações sobre o disco e que trate as mesmas de forma a simular a existência de um disco independente para cada uma das máquinas simuladas. Esta dissertação tem como objetivo dotar a plataforma de um novo módulo que permita que a mesma consiga simular sistemas que necessitem de recursos do disco, como bases de dados. Até à realização da dissertação a plataforma não fazia qualquer controlo sobre os recurso requeridos do disco, o que provocava resultados de simulação inconsistentes devido à partilha não controlada do disco da máquina onde a simulação era realizada. O modelo de simulação apresentado é validado experimentalmente com um microbenchmark e com TPC-B sobre a base de dados HyperSQL. De realçar que o resultado da dissertação em questão já se encontra integrado na plataforma e disponível no repositório oficial da plataforma Minha que se encontra alojado em http://code.google.com/p/minha/.The simulation components is an important tool to support the development of systems, testing and a better understanding of those components by researchers and developers. This can be accomplished using different approaches, but must allow faithful reproduction of the environment. This dissertation is based on an existing platform, Minha. This platform allows simulate distributed systems and is capable of simulating all the interactions between multiple machines at the network level. Although the platform is able to perform the simulation at the network level, this was not able to perform any simulation to the level of the disks of machines simulated until completion of the dissertation. Is this the problem that this dissertation proposes to solve by creating a module that performs the interception operations on the disk and that treat the same in order to simulate the existence of an independent disk for each of the simulated machines. This dissertation aims to provide a platform for a new module that allows simulate systems that require disk resources, such as databases. Until completion of the dissertation platform made no control over the resources required from disk, which caused inconsistent simulation results due to uncontrolled sharing disk of the machine where the simulation was performed. The simulation model is validated experimentally presented with a micro-benchmarks and TPC-B on the HyperSQL database. Note that the result of the dissertation is already integrated into the platform and available in the official repository of Minha platform that is available in http://code.google.com/p/minha/

    Earnings announcements and implied volatility

    Get PDF
    Mestrado em FinançasEu analisei a reação da volatilidade implícita em opções do tipo europeu subjacentes a ações americanas num curto espaço de tempo antes e depois das divulgações de resultados trimestrais, de 2007 a 2016. Concluí que as empresas que apresentam resultados que não atingem as expetativas dos analistas têm uma menor redução de volatilidade implícita nas opções quando comparadas com empresas que apresentam resultados que atingem ou superam as expetativas dos analistas. Neste estudo encontrei também evidências de uma queda generalizada na volatilidade implícita nos três dias subsequentes às divulgações de resultados. No que corresponde às maturidades, quanto maior a maturidade, menor o impacto das divulgações de resultados no preço das opções. O Mercado de opções aparenta absorver rapidamente a informação mais recente, e contém informação útil sobre as expetativas dos investidores.I have analyzed the reaction of the Implied Volatility on European style options regarding American equities in a short period before and after quarterly earnings announcements, from 2007 to 2016. I concluded that firms' earnings announcements that fail to meet analyst expectations produce a lower implied volatility drop on options, when compared to earnings announcements that meet/beat analyst expectations. In this study I also found evidence of a general decrease in implied volatility in a three-day window following the earnings announcements. In what regards the maturities of the options it seems the higher the maturity the less impact the earnings announcements have on the option pricing. The options market seems to absorb rapidly the new information, and contain useful information about investors' expectations.info:eu-repo/semantics/publishedVersio

    Produção e caracterização da fusão ZZapo-CBM64 para captura e deteção da apolipoproteína-A1 em testes de papel

    Get PDF
    Mestrado em Bioquímica - Métodos BiomolecularesAffibodies (ZZ) são pequenas proteínas de afinidade que podem ser modificadas para se ligarem a alvos específicos. Estas proteínas têm sido sugeridas como uma alternativa a anticorpos, devido ao seu processo de produção mais simples e barato. Assim, o objetivo deste trabalho de mestrado visou a possibilidade da utilização de um affibody (ZZapo) para a captura da Apolipoproteina-A1 (Apo-A1) e sua deteção com anticorpos Anti-Apo-A1 conjugados com Nanopartículas de Ouro (AuNPs) num Dispositivo Microfluídico Analítico de Papel (μPAD). Para atingir o objetivo proposto, a fusão de uma molécula com afinidade a carboidratos da família 64 (CBM64) com o affibody ZZapo (ZZapo-CBM64) foi desenhada, produzida em E.coli, sequenciada, purificada e quantificada com sucesso. A fusão ZZapo-CBM64 foi comparada com a fusão semelhante ZZ-CBM64, que tem afinidade para imunoglobulina G (IgG). Foi testada a capacidade de ligação das fusões à celulose, tendo-se verificado que ambas apresentaram alta afinidade a micropartículas e papel de celulose. Foi ainda testada a capacidade de ligação das duas fusões a IgG, pela utilização de IgG marcado com fluorescência. No entanto, ao contrário da ZZ-CBM64, a ZZapo-CBM64 não mostrou afinidade para a IgG. Um teste μPAD foi criado com barreiras impressas a cera hidrofóbica, e com um adesivo na base do teste, o que permitiu os testes serem feitos em superfícies planas e ainda contribuiu para um fluxo da amostra mais rápido. Os testes μPAD mostraram interações não específicas entre ZZapo-CBM64 e AuNPs, que foram removidas pela conjugação das AuNPs com Albumina de Soro Bovino (BSA) e adição de BSA e Tween20 à solução tampão. Os testes μPAD para deteção da Apo-A1 mostraram interações não específicas entre Apo-A1 e a membrana adesiva, que foram removidas pela utilização de um tampão de Bicarbonato de Amónia com BSA e Tween20. A deteção de Apo-A1 em μPADs não foi conseguida devido ao ZZapo-CBM64 não capturar a Apo-A1. Esta falha poderá ser devido a algum bloqueio da zona de captura relacionado com a estrutura 3D da fusão. De modo a ultrapassar esta questão, deverão ser realizados trabalhos futuros para o estudo da estrutura 3D da fusão, assim como estudo de outras fusões com diferentes variantes de affibodies para averiguar se o problema é exclusivo à fusão ZZapo-CBM64 ou não.Affibodies (ZZ) are small affinity proteins that can be engineered to bind to specific targets. These molecules have emerged as an alternative to antibodies due to their simpler and cheaper production process. The objective of this work was thus to assess the possibility of using an affibody (ZZapo) to capture Apolipoprotein-A1 (Apo-A1) and its detection using Anti-Apo-A1 antibodies conjugated to Gold Nanoparticles (AuNPs) on a Microfluidic Paper-Based Analytical Device (μPAD). To achieve the proposed objective, a fusion of a Carbohydrate Binding Molecule of the family 64 (CBM64) with a ZZapo affibody (ZZapo-CBM64) was successfully designed, produced in E. coli, sequenced, purified and quantified. The ZZapo-CBM64 fusion was then compared to a similar ZZ-CBM64 fusion (produced and purified in the same way) with immunoglobulin G (IgG) binding capacity, and tested for its cellulose binding capacity. Both fusions showed high affinity to cellulose particles and paper. They were also tested for IgG binding capacity, using a fluorescently labelled IgG. While ZZ-CBM64 successfully captured IgG, the new ZZapo-CBM64 did not capture the labelled IgG. A μPAD test was designed and produced with wax printed hydrophobic barriers, and the use of an adhesive membrane in the bottom of the test enabled running tests on a flat surface, and contributed for faster sample flow. μPAD tests showed that ZZapo-CBM64 and AuNPs had non-specific interactions, which were removed by conjugating AuNPs with Bovine Serum Albumin (BSA) and using a buffer containing BSA and Tween20. μPAD tests for the detection of Apo-A1 showed non-specific binding of Apo-A1 and the adhesive membrane, which was removed by using ammonium bicarbonate buffer. Apo-A1 detection in μPADs was unsuccessful, which was shown to be caused by ZZapo-CBM64 failing to capture Apo-A1. This failed capture could be caused by the capture zone of the protein being blocked. Future works should be directed to the study of the 3D structure of this fusion, as well as the study of other fusions with different affibody variants to assess if this problem is exclusive to ZZapo-CBM64 or not

    Recognition of gait patterns in human motor disorders using a machine learning approach

    Get PDF
    Dissertação de mestrado em Industrial Electronics and Computers EngineeringWith advanced age, the occurrence of motor disturbances becomes more prevalent and can lead to gait pathologies, increasing the risk of falls. Currently, there are many available gait monitoring systems that can aid in gait disorder diagnosis by extracting relevant data from a subject’s gait. This increases the amount of data to be processed in working time. To accelerate this process and provide an objective tool for a systematic clinical diagnosis support, Machine Learning methods are a powerful addition capable of processing great amounts of data and uncover non-linear relationships in data. The purpose of this dissertation is the development of a gait pattern recognition system based on a Machine Learning approach for the support of clinical diagnosis of post-stroke gait. This includes the development of a data estimation tool capable of computing several features from inertial sensors. Four different neural networks were be added to the classification tool: Feed-Forward (FFNN), convolutional (CNN) and two recurrent neural networks (LSTM and CLSTM). The performance of all classification models was analyzed and compared in order to select the most effective method of gait analysis. The performance metric used is Matthew’s Correlation Coefficient. The classifiers that exhibit the best performance where Support Vector Machines (SVM), k-Nearest Neighbors (KNN), CNN, LSTM and CLSTM, with a Matthew’s correlation coeficient of 1 in the test set. Despite the first two classifiers reaching the same performance of the three neural networks, the later reached this performance systematically and without the need of explicit dimensionality reduction methods.Com o avançar da idade, a ocorrência de distúrbios motores torna-se mais prevalente, conduzindo a patologias na marcha e aumentando o risco de quedas. Atualmente, muitos sistemas de monitorização de marcha extraem grandes quantidades de dados biomecânicos para apoio ao diagnóstico clínico, aumentando a quantidade de dados a ser processados em tempo útil. Para acelerar esse processo e proporcionar uma ferramenta objetiva de apoio sistemático ao diagnóstico clínico, métodos de Machine Learning são uma poderosa adição, processando grandes quantidades de dados e descobrindo relações não-lineares entre dados. Esta dissertação tem o objetivo de desenvolver um sistema de reconhecimento de padrões de marcha com uma abordagem de Machine Learning para apoio ao diagnóstico clínico da marcha de vitimas de AVC. Isso inclui o desenvolvimento de uma ferramenta de estimação de dados biomecânicos e cálculo de features, a partir de sensores inerciais. Quatro redes neuronais foram implementadas numa ferramenta de classificação: uma rede Feed-Forward (FFNN), uma convolucinal (CNN), e duas redes recorrentes (LSTM e CLSTM). O desempenho de todos os modelos de classificação foi analisado. A métrica de desempenho usada é o coeficiente de correlação de Matthew. Os classificadores com melhor performance foram: Support Vector Machines (SVM), k-Nearest Neighbors (KNN), CNN, LSTM e CLSTM. Todos com uma performance igual a 1 no conjunto de teste. Apesar de os dois primeiros classificadores atingirem a mesma performance das redes neuronais, estas atingiram esta performance repetidamente e sem necessitar de métodos de redução de dimensionalidade

    Effect of virtual reality rehabilitation on motor function in patients with stroke : a narrative review

    Get PDF
    Trabalho Final do Curso de Mestrado Integrado em Medicina, Faculdade de Medicina, Universidade de Lisboa, 2021Introdução: O acidente vascular cerebral é uma das principais causas de morte e incapacidade no mundo, sendo descrita como uma epidemia global. Défices motores causados por esta etiologia, afetam as tarefas diárias, bem como, a atividade profissional destas pessoas, resultando num dia-a-dia repleto de obstáculos. Desta forma, a reabilitação tem um papel fulcral, na melhoria destas queixas e consequentemente na qualidade de vida. A realidade virtual é uma ferramenta, que nos recentes anos tem vindo a ganhar um papel cada vez de maior importância para estes doentes. Nesta revisão narrativa, pretendemos comparar a reabilitação convencional com a reabilitação baseada na realidade virtual e perceber, desta forma, se existe benefício na combinação de ambas. Métodos: A nossa estratégia de pesquisa consistiu na pesquisa de ensaios clínicos randomizados em três diferentes plataformas (PubMed, sci-Elo e medRxiv), publicados nos últimos 10 anos cujo objetivo primário se focasse na função motora dos membros superiores. Usamos as seguintes palavras-chave como ponto de partida para a pesquisa de artigos: “Virtual Reality”, “rehabilitation”, “stroke”. Após ser aplicada a estratégia de pesquisa acima mencionada, obtivemos um total de 100 artigos. Após análise destes mesmos 100 artigos, somente 26 tinham os critérios necessários para a sua utilização na revisão, com uma amostra total de 1382 pacientes envolvidos nesta revisão de narrativa. Resultados: Como referido previamente, dos 100 artigos, somente 26 foram utilizados para a construção desta revisão narrativa. Os 74 artigos foram excluídos por não preencherem os critérios necessários para a sua inclusão. O facto do artigo não se focar na função motora do membro superior, foi a principal causa de exclusão de artigos. Outras razões como duplicados, não ter acesso livre, não focar o seu estudo na reabilitação do acidente vascular cerebral e não focar no estudo da realidade virtual também foram motivos para exclusão. Conclusão: Devido a inúmeras variáveis entre os diferentes ensaios, é impossível a conclusão de possíveis conexões entre a intervenção e os resultados obtidos. Sugere-se a realização de estudos em que certas variáveis como a intervenção realizada ao grupo de intervenção, o número de sessões, a duração das mesmas, sejam homogeneizados.Introduction: Stroke is one of the leading causes of death and disability and has been described as a worldwide epidemic. Motor function deficits due to stroke affect the patients' performance in daily tasks as well as in their jobs, which results in an increased difficulty in their everyday life. This way, rehabilitation in these patients plays an important role trying to improve their motor function and therefore their quality of life. Virtual reality, in recent years, has been increasingly more popular in this type of patients. In this narrative review, we aim to compare conventional therapy versus virtual reality-based therapy and find out if there is any kind of benefit in combining conventional therapy with virtual reality-based therapy. Methods: Our search strategy consisted in searching for randomized controlled trials published in the last 10 years with the primary outcome focusing on upper limb motor function, in three different platforms (PubMed, sci-Elo and medRxiv) using the following keywords: “virtual reality”, “rehabilitation”, “stroke”. After applied our search strategy we ended up with a total of 100 articles. After analyzing the 100 trials, only 26 of them met the necessary criteria to take part of this review, with a total sample of 1382 patients involved in the narrative review. Results: As previously mentioned, of the 100 articles, only 26 were used to build this narrative review. 74 articles excluded for not meeting the necessary criteria to make part of this review. The fact that the article did not focus on the motor function of the upper limb was the main reason for the exclusion of articles. Other reasons such as duplicates, not having open access, not focusing their study on stroke rehabilitation and not focusing on the study on virtual reality were also reasons for exclusion. Conclusion: Due to numerous variables between the different trials, it is impossible to conclude possible connections between the intervention and the results obtained. It is suggested that studies should be carried out with certain variables, such as the intervention carried out in the intervention group, the number of sessions, the duration of the sessions, homogenized

    Orchestration and Lifecycle Management over Virtualized Network Functions

    Get PDF
    A crescente evolução da nova geração de redes móveis aproxima a comercialização de redes de quinta geração da realidade. Os operadores móveis já dizem possuir dispositivos preparados para o 5G e já demonstram protótipos de serviços criados e sustentados para estas redes. Na realidade, as Redes de Acesso Radio (Radio Access Network - RAN) planeadas para o 5G já estão desenvolvidas e testadas, existindo já algumas redes de acesso radio com novas antenas preparadas para 5G em várias partes do mundo. Porém, as redes 5G vão mais além que a evolução das RAN, sendo a principal novidade desta geração de redes móvel a virtualização das redes centrais, incluindo nestas serviços e funções de rede. A Virtualização de Funções de Rede (Network Function Virtualization - NFV) está a ser normalizada pela European Telecommunications Standards Institute (ETSI). Esta tecnologia está a ser usada pela 3rd Generation Partnership Project (3GPP) para normalizar as redes 5G, nomeadamente a virtualização das suas redes centrais. A virtualização não só irá permitir o surgimento de novos serviços e funções de rede como também permitirá virtualizar serviços e funções de rede antigas. A virtualização não só irá melhorar significativamente as redes móveis, como também será mais fácil a gestão e a orquestração destas. Em Portugal, o consórcio 5GO, que envolve várias empresas com uma vasta experiência de Pesquisa e Desenvolvimento (Research & Development - R&D) na área de Telecomunicações, desenvolve o projeto Mobilizador 5G. Esta iniciativa portuguesa visa desenvolver soluções inovadoras para a rede 5G. Esta dissertação aborda inicialmente uma análise às tecnologias que permitem as redes 5G. De seguida foca-se nas plataformas de gestão e orquestração de redes existentes e por fim, nas operações de gestão de ciclo de vida (Lifecycle Management - LCM) que estas plataformas poderão realizar nas funções de redes. O objetivo final será testar e analisar essas operações em funções de rede através de uma das plataformas existentes.The growing evolution of the new mobile generation networks brings the commercialization of 5th generation networks closer to reality. Mobile operators already claim to have 5G-ready devices and already demonstrate prototypes of services created and sustained for these networks. In fact, the Radio Access Network (RAN) planned for 5G are already developed and tested, and there are already some radio access networks with new 5G-ready antennas in diverse parts of the world. However, 5G networks go beyond the evolution of RANs, with the main novelty of this mobile network generation being the virtualisation of central networks, including in these services and network functions. Network Function Virtualization (NFV) is being standardized by the European Telecommunications Standards Institute (ETSI). This technology is being used by the 3rd Generation Partnership Project (3GPP) to standardise 5G networks, particularly the virtualisation of core networks. Virtualization will not only allow the development of new network services and functions, it will also allow the virtualization of legacy network services and functions. Virtualization will not only significantly improve mobile networks, but also make it easier to manage and orchestrate them. In Portugal, the 5GO consortium, which involves several companies with a vast experience in Research & Development (R&D) in the area of Telecommunications, develops the project Mobilizador 5G. This Portuguese initiative aims to develop innovative solutions for the 5G network. This dissertation initially addresses an analysis of the technologies that enable 5G networks. It then focuses on the existing network management and orchestration platforms and, finally, on the Lifecycle Management (LCM) operations that these platforms can perform in network functions. The final objective will be to test and analyse these operations in network functions through one of the existing platforms
    corecore