24,611 research outputs found
AVIRIS data characteristics and their effects on spectral discrimination of rocks exposed in the Drum Mountains, Utah: Results of a preliminary study
Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) data collected over a geologically diverse field site and over a nearby calibration site were analyzed and interpreted in efforts to document radiometric and geometric characteristics of AVIRIS, quantify and correct for detrimental sensor phenomena, and evaluate the utility of AVIRIS data for discriminating rock types and identifying their constituent mineralogy. AVIRIS data acquired for these studies exhibit a variety of detrimental artifacts and have lower signal-to-noise ratios than expected in the longer wavelength bands. Artifacts are both inherent in the image data and introduced during ground processing, but most may be corrected by appropriate processing techniques. Poor signal-to-noise characteristics of this AVIRIS data set limited the usefulness of the data for lithologic discrimination and mineral identification. Various data calibration techniques, based on field-acquired spectral measurements, were applied to the AVIRIS data. Major absorption features of hydroxyl-bearing minerals were resolved in the spectra of the calibrated AVIRIS data, and the presence of hydroxyl-bearing minerals at the corresponding ground locations was confirmed by field data
Statistical evaluation of control inputs and eye movements in the use of instruments clusters during aircraft landing
Two different types of analyses were done on data from a study in which eye movements and other variables were recorded while four pilots executed landing sequences in a Boeing 737 simulation. Various conditions were manupulated, including changes in turbulence, starting position, and instrumentation. Control inputs were analyzed in the context of the various conditions and compared against ratings of workload obtained using the Cooper-Harper scale. A number of eye-scanning measures including mean dwell time and transition from one instrument to another were entered into a principal components factor analysis. The results show a differentiation between control inputs and eye-scanning behavior. This shows the need for improved definition of workload and experiments to uncover the important differences among control inputs, eye-scanning and cognitive processes of the pilot
Ks band secondary eclipses of WASP-19b and WASP-43b with the Anglo-Australian Telescope
We report new Ks band secondary eclipse observations for the hot-Jupiters
WASP-19b and WASP-43b. Using the IRIS2 infrared camera on the Anglo-Australian
Telescope (AAT), we measured significant secondary eclipses for both planets,
with depths of 0.287 -0.020/+0.020% and 0.181 -0.027/+0.027% for WASP-19b and
WASP-43b respectively. We compare the observations to atmosphere models from
the VSTAR line-by-line radiative transfer code, and examine the effect of C/O
abundance, top layer haze, and metallicities on the observed spectra. We
performed a series of signal injection and recovery exercises on the observed
light curves to explore the detection thresholds of the AAT+IRIS2 facility. We
find that the optimal photometric precision is achieved for targets brighter
than Kmag = 9, for which eclipses as shallow as 0.05% are detectable at >5
sigma significance.Comment: Accepted for publication in MNRAS, 13 pages, 10 figure
Development of dispersion strengthened nickel-chromium alloy (Ni-Cr-ThO2) sheet for space shuttle vehicles, part 2
Two dispersion strengthened nickel base alloy systems were developed for use at temperatures up to 1204 C(2200 F); TD nickel chromium (TDNiCr) and TD nickel chromium aluminum (TDNiCrA1). They are considered candidate materials for use on the thermal protection systems of the space shuttle and for long term use in aircraft gas turbine engine applications. Improved manufacturing processes were developed for the fabrication of TDNiCr sheet and foil to specifications. Sheet rolling process studies and extrusion studies were made on two aluminum containing alloys: Ni-16%Cr-3.5%A1-2%ThO2 and Ni-16%Cr-5.0%A12%ThO2. Over 1600 kg.(3500 lb.) of plate, sheet, foil, bar and extrusion products were supplied to NASA Centers for technology studies
Demonstration Advanced Avionics System (DAAS) function description
The Demonstration Advanced Avionics System, DAAS, is an integrated avionics system utilizing microprocessor technologies, data busing, and shared displays for demonstrating the potential of these technologies in improving the safety and utility of general aviation operations in the late 1980's and beyond. Major hardware elements of the DAAS include a functionally distributed microcomputer complex, an integrated data control center, an electronic horizontal situation indicator, and a radio adaptor unit. All processing and display resources are interconnected by an IEEE-488 bus in order to enhance the overall system effectiveness, reliability, modularity and maintainability. A detail description of the DAAS architecture, the DAAS hardware, and the DAAS functions is presented. The system is designed for installation and flight test in a NASA Cessna 402-B aircraft
Effect of Cluster Formation on Isospin Asymmetry in the Liquid-Gas Phase Transition Region
Nuclear matter within the liquid-gas phase transition region is investigated
in a mean-field two-component Fermi-gas model. Following largely analytic
considerations, it is shown that: (1) Due to density dependence of asymmetry
energy, some of the neutron excess from the high-density phase could be
expelled into the low-density region. (2) Formation of clusters in the gas
phase tends to counteract this trend, making the gas phase more liquid-like and
reducing the asymmetry in the gas phase. Flow of asymmetry between the
spectator and midrapidity region in reactions is discussed and a possible
inversion of the flow direction is indicated.Comment: 9 pages,3 figures, RevTe
HST Fine Guidance Sensor Astrometric Parallaxes for Three Dwarf Novae: SS Aurigae, SS Cygni, and U Geminorum
We report astrometric parallaxes for three well known dwarf novae obtained
using the Fine Guidance Sensors on the Hubble Space Telescope. We found a
parallax for SS Aurigae of Pi = 5.00 +/- 0.64 mas, for SS Cygni we found Pi =
6.02 +/- 0.46 mas, and for U Geminorum we obtained Pi = 10.37 +/- 0.50 mas.
These represent the first true trigonometric parallaxes of any dwarf novae. We
briefly compare these results with previous distance estimates. This program
demonstrates that with a very modest amount of HST observing time, the Fine
Guidance Sensors can deliver parallaxes of unrivaled precision.Comment: 15 pages, 2 Table
Production of a Prompt Photon in Association with Charm at Next-to-Leading Order in QCD
A second order, , calculation in perturbative quantum
chromodynamics of the two particle inclusive cross section is presented for the
reaction for large values of the
transverse momentum of the prompt photon and charm quark. The combination of
analytic and Monte Carlo integration methods used here to perform phase-space
integrations facilitates imposition of photon isolation restrictions and other
selections of relevance in experiments. Differential distributions are provided
for various observables. Positive correlations in rapidity are predicted.Comment: 27 pages in RevTex plus 14 figures in one compressed PS fil
Phase-field model for grain boundary grooving in multi-component thin films
Polycrystalline thin films can be unstable with respect to island formation
(agglomeration) through grooving where grain boundaries intersect the free
surface and/or thin film-substrate interface. We develop a phase-field model to
study the evolution of the phases, composition, microstructure and morphology
of such thin films. The phase-field model is quite general, describing
compounds and solid solution alloys with sufficient freedom to choose
solubilities, grain boundary and interface energies, and heats of segregation
to all interfaces. We present analytical results which describe the interface
profiles, with and without segregation, and confirm them using numerical
simulations. We demonstrate that the present model accurately reproduces the
theoretical grain boundary groove angles both at and far from equilibrium. As
an example, we apply the phase-field model to the special case of a Ni(Pt)Si
(Ni/Pt silicide) thin film on an initially flat silicon substrate.Comment: 12 pages, 5 figures, submitted to Modelling Simulation Mater. Sci.
En
Recommended from our members
The Tabby cat locus maps to feline chromosome B1.
The Tabby markings of the domestic cat are unique coat patterns for which no causative candidate gene has been inferred from other mammals. In this study, a genome scan was performed on a large pedigree of cats that segregated for Tabby coat markings, specifically for the Abyssinian (Ta-) and blotched (tbtb) phenotypes. There was linkage between the Tabby locus and eight markers on cat chromosome B1. The most significant linkage was between marker FCA700 and Tabby (Z = 7.56, theta = 0.03). Two additional markers in the region supported linkage, although not with significant LOD scores. Pairwise analysis of the markers supported the published genetic map of the cat, although additional meioses are required to refine the region. The linked markers cover a 17-cM region and flank an evolutionary breakpoint, suggesting that the Tabby gene has a homologue on either human chromosome 4 or 8. Alternatively, Tabby could be a unique locus in cats
- …