An Approach to Line Balancing on Virtual Supervisor Induction Method and Intelligent Agents

This approach develops a method for solving the line-balancing problem, which is based on two stages. The works in a first stage is to identify the task of workstation, the assignment of the tasks to stations on the line and the recognized balance delay. In this stage we propose the induction VS method, which allows further identify the exact position between pieces, machine into a workstation and also between extern workstation, as well as intracellular and intercellular part. This way each task is identified and measured. In the second stage is to carry out a macro-approach to choose the resource to perform each of them. The hybrid intelligent agent architecture is proposed for this second stage, which has consideration of machining sequence. The integration between both technologies allows us to develop new hybrid architecture capable to reduce the computational time in the deliberative layers fundamentally. Finally, a reconfigurable testbed has been proposed for future experiments and results to evaluate this new balancing method. Some previous computational experiments provide that the proposed approach is efficient to solve practical transfer line design for balancing problem

Chromosomal radiosensitivity of lymphocytes in South African breast cancer patients of different ethnicity: An indirect measure of cancer susceptibility

Background. Breast cancer is the leading cancer among South African (SA) women. SA has citizens from diverse ethnic groups, and the lifetime risk of breast cancer differs according to ethnicity. Candidate genes for increased breast cancer risk are those involved in DNA damage repair pathways, and mutations in these genes are characterised by increased chromosomal radiosensitivity. Several European studies have shown that breast cancer patients are more sensitive to ionising radiation than healthy individuals.Objectives. To investigate the in vitro chromosomal radiosensitivity of SA women with breast cancer and the possible influence of ethnicity and clinical parameters on chromosomal radiosensitivity.Methods. Chromosomal radiosensitivity was analysed with the micronucleus assay using lymphocytes of breast cancer patients and healthy individuals of different ethnic groups. Lymphocytes were irradiated in vitro with 2 Gy or 4 Gy, and micronuclei (MN) were scored 70 hours after irradiation. These MN frequencies were correlated with the ethnicity and clinical parameters of the breast cancer patients.Results. MN values were higher in breast cancer patients than in healthy controls. This was noted for black and white breast cancer patients at the different radiation doses. No correlations could be demonstrated between MN values and clinical parameters of the breast cancer, except that MN values were significantly higher in oestrogen receptor (ER)-positive breast cancers.Conclusion. SA breast cancer patients have elevated chromosomal radiosensitivity compared with healthy controls. ER positivity also influences chromosomal radiosensitivity

Timing and placing samplings to optimally calibrate a reactive transport model: exploring the potential for <i>Escherichia coli</i> in the Scheldt estuary

For the calibration of any model, measurements are necessary. As measurements are expensive, it is of interest to determine beforehand which kind of samples will provide the maximum of information. Using a criterion related to the Fisher information matrix, it is possible to design a sampling scheme that will enable the most precise model parameter estimates. This approach was applied to a reactive transport model (based on SLIM) of Escherichia coli in the Scheldt Estuary. As this estuary is highly influenced by the tide, it is expected that careful timing of the samples with respect to the tidal cycle will have an effect on the quality of the data. The timing and also the positioning of samples were optimised according to the proposed criterion. In the investigated case studies the precision of the estimated parameters could be improved by up to a factor of ten, confirming the usefulness of this approach to maximize the amount of information that can be retrieved from a fixed number of samples

Intra-session test-retest reliability of pelvic floor muscle electromyography during running

Introduction and hypothesis: The prevalence of female stress urinary incontinence is high, and young adults are also affected, including athletes, especially those involved in "high-impact” sports. To date there have been almost no studies testing pelvic floor muscle (PFM) activity during dynamic functional whole body movements. The aim of this study was the description and reliability test of PFM activity and time variables during running. Methods: A prospective cross-sectional study including ten healthy female subjects was designed with the focus on the intra-session test-retest reliability of PFM activity and time variables during running derived from electromyography (EMG) and accelerometry. Results: Thirteen variables were identified based on ten steps of each subject: Six EMG variables showed good reliability (ICC 0.906-0.942) and seven time variables did not show good reliability (ICC 0.113-0.731). Time variables (e.g. time difference between heel strike and maximal acceleration of vaginal accelerator) showed low reliability. However, relevant PFM EMG variables during running (e.g., pre-activation, minimal and maximal activity) could be identified and showed good reliability. Conclusion: Further adaptations regarding measurement methods should be tested to gain better control of the kinetics and kinematics of the EMG probe and accelerometers. To our knowledge this is the first study to test the reliability of PFM activity and time variables during dynamic functional whole body movements. More knowledge of PFM activity and time variables may help to provide a deeper insight into physical strain with high force impacts and important functional reflexive contraction patterns of PFM to maintain or to restore continenc

<i>In situ</i> measurements of micronutrient dynamics in open seawater show that complex dissociation rates may limit diatom growth

In this first in situ study of the dynamic availability of phytoplankton micronutrients, a SeaExplorer glider was combined with Diffusive Gradients in Thin Films and deployed in the Mediterranean Sea. On the basis of their labile metal complex pools, we discovered that Fe and Co can be potentially limiting and Cu co-limiting to diatom growth, contrary to the generally accepted view that phosphorus (phosphate) is the growth limiting element in the Mediterranean Sea. For flagellates and picoplankton, phosphorus remains the main element limiting growth. Our in situ measurements showed that organic complexes of Fe and Cu (>98% of total dissolved concentration), dissociate slower than inorganic complexes of Co, Cd and Ni (>99% of total dissolved concentration being free ions and inorganic complexes). This strengthens the potential growth limiting effect of Fe and Cu versus phosphate, which is present as a free ion and, thus, directly available for plankton

European silver eel (<i>Anguilla anguilla</i> L.) migration behaviour in a highly regulated shipping canal

Among the many man-made structures that facilitate shipping, navigable canals take an important position. These canals may offer energetically favourable migration routes for diadromous fish, but they may also obstruct fish migration, for instance at shipping locks. Because the use of shipping canals by, and their effects on, migrating fish remain unknown, we assessed whether these canals can play a significant role in the migration of the critically endangered European eel. Only one third of 70 acoustically tagged silver eels completed migration through a shipping canal, and did so at a very low pace (average -1) due to delays at shipping locks and most likely also due to the disruption of water flow. These delays may come at an energetic cost, hampering the chances of successful migration. Knowledge on the impact of shipping canals on diadromous fish is crucial for proper management regulations. For instance, the observation that eels mostly migrated at night and during spring and autumn can support water managers to define adequate measures to improve eel migration in shipping canals

The Belgian PCB and dioxin incident of January-June 1999: exposure data and potential impact on health.

In January 1999, 500 tons of feed contaminated with approximately 50 kg of polychlorinated biphenyls (PCBs) and 1 g of dioxins were distributed to animal farms in Belgium, and to a lesser extent in the Netherlands, France, and Germany. This study was based on 20,491 samples collected in the database of the Belgian federal ministries from animal feed, cattle, pork, poultry, eggs, milk, and various fat-containing food items analyzed for their PCB and/or dioxin content. Dioxin measurements showed a clear predominance of polychlorinated dibenzofuran over polychlorinated dibenzodioxin congeners, a dioxin/PCB ratio of approximately 1:50,000 and a PCB fingerprint resembling that of an Aroclor mixture, thus confirming contamination by transformer oil rather than by other environmental sources. In this case the PCBs contribute significantly more to toxic equivalents (TEQ) than dioxins. The respective means +/- SDs and the maximum concentrations of dioxin (expressed in TEQ) and PCB observed per gram of fat in contaminated food were 170.3 +/- 487.7 pg, 2613.4 pg, 240.7 +/- 2036.9 ng, and 51059.0 ng in chicken; 1.9 +/- 0.8 pg, 4.3 pg, 34.2 +/- 30.5 ng, and 314.0 ng in milk; and 32.0 +/- 104.4 pg, 713.3 pg, 392.7 +/- 2883.5 ng, and 46000.0 ng in eggs. Assuming that as a consequence of this incident between 10 and 15 kg PCBs and from 200 to 300 mg dioxins were ingested by 10 million Belgians, the mean intake per kilogram of body weight is calculated to maximally 25,000 ng PCBs and 500 pg international TEQ dioxins. Estimates of the total number of cancers resulting from this incident range between 40 and 8,000. Neurotoxic and behavioral effects in neonates are also to be expected but cannot be quantified. Because food items differed widely (more than 50-fold) in the ratio of PCBs to dioxins, other significant sources of contamination and a high background contamination are likely to contribute substantially to the exposure of the Belgian population