Extreme accumulation of nucleotides in simulated hydrothermal pore systems

We simulate molecular transport in elongated hydrothermal pore systems influenced by a thermal gradient. We find extreme accumulation of molecules in a wide variety of plugged pores. The mechanism is able to provide highly concentrated single nucleotides, suitable for operations of an RNA world at the origin of life. It is driven solely by the thermal gradient across a pore. On the one hand, the fluid is shuttled by thermal convection along the pore, whereas on the other hand, the molecules drift across the pore, driven by thermodiffusion. As a result, millimeter-sized pores accumulate even single nucleotides more than 108-fold into micrometer-sized regions. The enhanced concentration of molecules is found in the bulk water near the closed bottom end of the pore. Because the accumulation depends exponentially on the pore length and temperature difference, it is considerably robust with respect to changes in the cleft geometry and the molecular dimensions. Whereas thin pores can concentrate only long polynucleotides, thicker pores accumulate short and long polynucleotides equally well and allow various molecular compositions. This setting also provides a temperature oscillation, shown previously to exponentially replicate DNA in the protein-assisted PCR. Our results indicate that, for life to evolve, complicated active membrane transport is not required for the initial steps. We find that interlinked mineral pores in a thermal gradient provide a compelling high-concentration starting point for the molecular evolution of life

Designer lipid-like peptides

A crucial bottleneck in membrane protein studies, particularly G-protein coupled receptors, is the notorious difficulty of finding an optimal detergent that can solubilize them and maintain their stability and function. Here we report rapid production of 12 unique mammalian olfactory receptors using short designer lipid-like peptides as detergents. The peptides were able to solubilize and stabilize each receptor. Circular dichroism showed that the purified olfactory receptors had alpha-helical secondary structures. Microscale thermophoresis suggested that the receptors were functional and bound their odorants. Blot intensity measurements indicated that milligram quantities of each olfactory receptor could be produced with at least one peptide detergent. The peptide detergents' capability was comparable to that of the detergent Brij-35. The ability of 10 peptide detergents to functionally solubilize 12 olfactory receptors demonstrates their usefulness as a new class of detergents for olfactory receptors, and possibly other G-protein coupled receptors and membrane proteins

Insertion of T4-lysozyme (T4L) can be a useful tool for studying olfactory-related GPCRs.

The detergents used to solubilize GPCRs can make crystal growth the rate-limiting step in determining their structure. The Kobilka laboratory showed that insertion of T4-lysozyme (T4L) in the 3rd intracellular loop is a promising strategy towards increasing the solvent-exposed receptor area, and hence the number of possible lattice-forming contacts. The potential to use T4L with the olfactory-related receptors hOR17-4 and hVN1R1 was thus tested. The structure and function of native and T4L-variants were compared. Both receptors localized to the cell membrane, and could initiate ligand-activated signaling. Purified receptors not only had the predicted alpha-helical structures, but also bound their ligands canthoxal (MW = 178.23) and myrtenal (MW = 150.22). Interestingly, the T4L variants had higher percentages of soluble monomers compared to protein aggregates, effectively increasing the protein yield that could be used for structural and function studies. They also bound their ligands for longer times, suggesting higher receptor stability. Our results indicate that a T4L insertion may be a general method for obtaining GPCRs suitable for structural studies

Impact of treatment planning target volumen (PTV) size on radiation induced diarrhoea following selenium supplementation in gynecologic radiation oncology - a subgroup analysis of a multicenter, phase III trial

Background: In a previous analysis (Int J Radiat Oncol Biol Phys 70:828-835,2010), we assessed whether an adjuvant supplementation with selenium (Se) improves Se status and reduces the radiation-induced side-effects of patients treated by adjuvant radiotherapy (RT) for cervical and uterine cancer. Now, a potential relation between the planning target volume (PTV) of the RT and the Se effect concerning radiation induced diarrhoea was evaluated in detail. Methods: Whole blood Se concentrations had been measured in patients with cervical (n=11) and uterine cancer (n=70) after surgical treatment, during, and at the end of RT. Patients with initial Se concentrations of less than 84 μg/l were categorized as Se-deficient and randomized before RT to receive Se (as sodium selenite) per os on the days of RT, or to receive no supplement during RT. Diarrhoea was graded according to the Common Toxicity Criteria system (CTC, Version 2a). The evaluation of the PTV of the RT was ascertained with the help of a specialised computer-assisted treatment planning software used for radiation planning procedure. Results: A total of 81 patients had been randomized for the initial supplementation study, 39 of which received Se [selenium group, SeG] and 42 serving as controls [control group, CG]. Mean Se levels did not differ between SeG and CG upon study initiation, but were significantly higher in the SeG compared to the CG at the end of RT. The actuarial incidence of at least CTC 2 radiation induced diarrhoea in the SeG was 20.5% compared to 44.5% in the CG (p=0.04). The median PTV in both groups was 1302 ml (916–4608). With a PTV of 1302 ml (n=40) the actuarial incidence of at least CTC 2 diarrhoea in the SeG was 19.1% (4 of 21 patients) versus 52.6% (10 of 19 patients) in the CG (p=0.046). Conclusions: Se supplementation during RT was effective to improve blood Se status in Se-deficient cervical and uterine cancer patients, and reduces episodes and severity of RT-induced diarrhoea. This effect was most pronounced and significant in patients with large PTV (> 1302 ml)

A Robust and Rapid Method of Producing Soluble, Stable, and Functional G-Protein Coupled Receptors

Membrane proteins, particularly G-protein coupled receptors (GPCRs), are notoriously difficult to express. Using commercial E.coli cell-free systems with the detergent Brij-35, we could rapidly produce milligram quantities of 13 unique GPCRs. Immunoaffinity purification yielded receptors at >90% purity. Secondary structure analysis using circular dichroism indicated that the purified receptors were properly folded. Microscale thermophoresis, a novel label-free and surface-free detection technique that uses thermal gradients, showed that these receptors bound their ligands. The secondary structure and ligand-binding results from cell-free produced proteins were comparable to those expressed and purified from HEK293 cells. Our study demonstrates that cell-free protein production using commercially available kits and optimal detergents is a robust technology that can be used to produce sufficient GPCRs for biochemical, structural, and functional analyses. This robust and simple method may further stimulate others to study the structure and function of membrane proteins.United States. Defense Advanced Research Projects Agency (DARPA-HR0011-09-C-0012)Massachusetts Institute of Technology. Undergraduate Research Opportunities Progra

Designer Lipid-Like Peptides: A Class of Detergents for Studying Functional Olfactory Receptors Using Commercial Cell-Free Systems

A crucial bottleneck in membrane protein studies, particularly G-protein coupled receptors, is the notorious difficulty of finding an optimal detergent that can solubilize them and maintain their stability and function. Here we report rapid production of 12 unique mammalian olfactory receptors using short designer lipid-like peptides as detergents. The peptides were able to solubilize and stabilize each receptor. Circular dichroism showed that the purified olfactory receptors had alpha-helical secondary structures. Microscale thermophoresis suggested that the receptors were functional and bound their odorants. Blot intensity measurements indicated that milligram quantities of each olfactory receptor could be produced with at least one peptide detergent. The peptide detergents' capability was comparable to that of the detergent Brij-35. The ability of 10 peptide detergents to functionally solubilize 12 olfactory receptors demonstrates their usefulness as a new class of detergents for olfactory receptors, and possibly other G-protein coupled receptors and membrane proteins.United States. Defense Advanced Research Projects Agency (DARPA-HR0011-09-C-0012)Massachusetts Institute of Technology. Undergraduate Research Opportunities Progra

Matched-pair analysis of patients with female and male breast cancer: a comparative analysis

<p>Abstract</p> <p>Background</p> <p>Male breast cancer (MBC) is a rare disease accounting for approximately 1% of all breast carcinomas. Presently treatment recommendations are derived from the standards for female breast cancer. However, those approaches might be inadequate because of distinct gender specific differences in tumor biology of breast cancer. This study was planned in order to contrast potential differences between female and male breast cancer in both tumor biological behavior and clinical management.</p> <p>Methods</p> <p>MBC diagnosed between 1995-2007 (region Chemnitz/Zwickau, Saxony, Germany) was retrospectively analyzed. Tumor characteristics, treatment and follow-up of the patients were documented. In order to highlight potential differences each MBC was matched with a female counterpart (FBC) that showed accordance in at least eight tumor characteristics (year of diagnosis, age, tumor stage, nodal status, grade, estrogen- and progesterone receptors, HER2 status).</p> <p>Results</p> <p>108 male/female matched-pairs were available for survival analyses. In our study men and women with breast cancer had similar disease-free (DFS) and overall (OS) survival. The 5-years DFS was 53.4% (95% CI, range 54.1-66.3) in men respectively 62.6% (95% CI, 63.5-75.3) in women (p > 0.05). The 5-years OS was 71.4% (95% CI, 62.1-72.7%) and 70.3% (95% CI, 32.6-49.6) in women (p > 0.05). In males DFS analyses revealed progesterone receptor expression as the only prognostic relevant factor (p = 0.006). In multivariate analyses for OS both advanced tumor size (p = 0.01) and a lack of progesterone receptor expression were correlated (p = 0.01) with poor patients outcome in MBC.</p> <p>Conclusion</p> <p>Our comparative study revealed no survival differences between male and female breast cancer patients and gives evidence that gender is no predictor for survival in breast cancer. This was shown despite of significant gender specific differences in terms of frequency and intensity of systemic therapy in favor to female breast cancer.</p

Microscale thermophoresis quantifies biomolecular interactions under previously challenging conditions

Item does not contain fulltextMicroscale thermophoresis (MST) allows for quantitative analysis of protein interactions in free solution and with low sample consumption. The technique is based on thermophoresis, the directed motion of molecules in temperature gradients. Thermophoresis is highly sensitive to all types of binding-induced changes of molecular properties, be it in size, charge, hydration shell or conformation. In an all-optical approach, an infrared laser is used for local heating, and molecule mobility in the temperature gradient is analyzed via fluorescence. In standard MST one binding partner is fluorescently labeled. However, MST can also be performed label-free by exploiting intrinsic protein UV-fluorescence. Despite the high molecular weight ratio, the interaction of small molecules and peptides with proteins is readily accessible by MST. Furthermore, MST assays are highly adaptable to fit to the diverse requirements of different biomolecules, such as membrane proteins to be stabilized in solution. The type of buffer and additives can be chosen freely. Measuring is even possible in complex bioliquids like cell lysate allowing close to in vivo conditions without sample purification. Binding modes that are quantifiable via MST include dimerization, cooperativity and competition. Thus, its flexibility in assay design qualifies MST for analysis of biomolecular interactions in complex experimental settings, which we herein demonstrate by addressing typically challenging types of binding events from various fields of life science