Photocatalytic reduction of CO2 over Ti3+ self-doped TiO2-based nanomaterials

In this study, we explored the photocatalytic efficacy of Ti3+-doped TiO2-based photocatalysts for CO2 reduction. The Ti3+ self-doped photocatalysts were synthesized using a straightforward chemical reduction with sodium borohydride (NaBH4). Our investigation aimed to elucidate the intricate interplay between the synthesis process and the quantity of NaBH4 reductant on the physical-chemical and photocatalytic attributes of the defective TiO2-based photocatalysts. We explored three different commercially available TiO2 materials labeled P25, (S)TiO2, and KRONOClean7050, which were reduced (2 g of TiO2) with 0.75 and 1.5 g of NaBH4. The reduction with 0.75 g of NaBH4 led to a significant decrease of photocatalytic activity in all three cases. It was caused by clogging of the photocatalysts surface by sodium ions which resulted in the surface recombination of charge carriers. Oppositely, the reduction with 1.5 g of NaBH4, led to an increase of the photocatalytic activity with superior performance of KRONOClean7050. The comprehensive characterization of all the samples explained this superior performance of KC7050_RED_1.5 sample. Importantly, it did not contain any amorphous phase and the crystal size was two times higher compared to other 2 samples reduced by 1.5 g of NaBH4. In the addition to higher crystallinity, the formation of a disordered TiO2−x layer, enriched with Ti3+ defects and oxygen vacancies, was confirmed. These structural features enhance the light absorption and mitigate undesired recombination of photogenerated charge carriers. These results would trigger farther investigation of defect engineering towards enhancement of the efficiency of metal oxide photocatalysts.European Union's Horizon 2020 project SAN4Fuel, (101079384, HORIZON-WIDERA-2021-ACCESS-03–01); European Commission, EC, (101120397, CZ.10.03.01/00/22_003/0000048, HORIZON-WIDERA-2022-TALENTS, RRC/12/2022); Grantová Agentura České Republiky, GA ČR, (GA CR 21-24268K); Narodowe Centrum Badań i Rozwoju, NCBR, (NOR/POLNORCCS/PhotoRed/0007/2019-00)Large Research Infrastructure ENREGAT [LM2023056]; Norway Grants 2014-2021 via the National Centre for Research and Development [NOR/POLNORCCS/PhotoRed/0007/2019-00]; Czech Science Foundation [GA CR 21-24268K]; European Union [HORIZON-WIDERA-2021-ACCESS-03-01: 101079384, CZ.10.03.01/00/22_003/0000048]; Support for Science and Research in the Moravia- Silesia Region 2022 [RRC/12/2022]; APPROACH [101120397

Hematene: A sustainable 2D conductive platform for visible-light-driven photocatalytic ammonia decomposition

The emerging class of 2D non-van der Waals (n-vdW) materials, including 2D iron oxides, possesses unique properties and high applicability, making them attractive for various technological applications. However, the synthesis of these materials through a scalable and eco-friendly method remains a challenge, as most known chemical exfoliation processes require toxic organic solvents. In this study, we report a green synthesis of 2D hematene (α-Fe2O3) using an ultrasound-supported exfoliation method of earth-abundant iron oxide ore in a pure aqueous solution. The resulting hematene sheets, only a few nanometers thick, exhibit superior electrochemical performance in terms of charge transfer processes, making them ideal for photocatalytic applications. By doping a conductive hematene substrate with ruthenium, we demonstrate a synergistic effect for generating electrons and holes under visible light irradiation. Using this approach, we successfully decomposed ammonia into hydrogen and nitrogen, highlighting the potential of this novel class of environmentally-friendly photocatalysts for clean energy production. Overall, our water-assisted scalable synthesis of hematene offers a promising strategy for producing efficient and sustainable photocatalysts.Web of Science34art. no. 10188

Magnetic polaron states in photoluminescent carbon dots enable hydrogen peroxide photoproduction

Photoactivation of aspartic acid-based carbon dots (Asp-CDs) induces the generation of spin-separated species, including electron/hole (e−/h+) polarons and spin-coupled triplet states, as uniquely confirmed by the light-induced electron paramagnetic resonance spectroscopy. The relative population of the e−/h+ pairs and triplet species depends on the solvent polarity, featuring a substantial stabilization of the triplet state in a non-polar environment (benzene). The electronic properties of the photoexcited Asp-CDs emerge from their spatial organization being interpreted as multi-layer assemblies containing a hydrophobic carbonaceous core and a hydrophilic oxygen and nitrogen functionalized surface. The system properties are dissected theoreti cally by density functional theory in combination with molecular dynamics simulations on quasi-spherical assemblies of size-variant flakelike model sys tems, revealing the importance of size dependence and interlayer effects. The formation of the spin-separated states in Asp-CDs enables the photoproduc tion of hydrogen peroxide (H2O2) from water and water/2-propanol mixture via a water oxidation reaction.Web of Science1932art. no. 220658

Graphene nanobeacons with high-affinity pockets for combined, selective, and effective decontamination and reagentless detection of heavy metals

Access to clean water for drinking, sanitation, and irrigation is a major sustainable development goal of the United Nations. Thus, technologies for cleaning water and quality-monitoring must become widely accessible and of low-cost, while being effective, selective, sustainable, and eco-friendly. To meet this challenge, hetero-bifunctional nanographene fluorescent beacons with high-affinity pockets for heavy metals are developed, offering top-rated and selective adsorption for cadmium and lead, reaching 870 and 450 mg g(-1), respectively. The heterobifunctional and multidentate pockets also operate as selective gates for fluorescence signal regulation with sub-nanomolar sensitivity (0.1 and 0.2 nm for Pb2+ and Cd2+, respectively), due to binding affinities as low as those of antigen-antibody interactions. Importantly, the acid-proof nanographenes can be fully regenerated and reused. Their broad visible-light absorption offers an additional mode for water-quality monitoring based on ultra-low cost and user-friendly reagentless paper detection with the naked-eye at a limit of detection of 1 and 10 ppb for Pb2+ and Cd2+ ions, respectively. This work shows that photoactive nanomaterials, densely-functionalized with strong, yet selective ligands for targeted contaminants, can successfully combine features such as excellent adsorption, reusability, and sensing capabilities, in a way to extend the material's applicability, its life-cycle, and value-for-money.Web of Science1833art. no. 220100

Light-induced migration of spin defects in TiO2 nanosystems and their contribution to the H-2 evolution catalysis from water

The photocatalytic activity for H-2 production from water, without presence of hole scavengers, of thermally reduced TiO2 nanoparticles (H-500, H-700) and neat anatase were followed by in-situ continuous-wave light-induced electron paramagnetic resonance technique (CW-LEPR), in order to correlate the H-2 evolution rates with the electronic fingerprints of the photoexcited systems. Under UV irradiation, photoexcited electrons moved from the deep lattice towards the superficially exposed Ti sites. These photogenerated redox sites mediated (e(-)+h(+)) recombination and were the crucial electronic factor affecting catalysis. In the best-performant system (H-500), a synergic combination of mobile electrons was observed, which dynamically created diverse types of Ti3+ sites, including interstitial Ti3+, and singly ionized electrons trapped in oxygen vacancies (V-O(.)). The interplay of these species fed successfully surface exposed Ti4+ sites, which became a catalytically active, fast reacting Ti4+reversible arrow Ti3+ state that was key for the H-2 evolution process.Web of Science14204414440

Light-induced defect formation and Pt single atoms synergistically boost photocatalytic H2 production in 2D TiO2-bronze nanosheets ?

Ultrathin two-dimensional (2D) semiconductor nanosheets decorated with single atomic species (SAs) have recently attracted increasing attention due to their abundant surface-exposed reactive sites and maximum SAs binding capabilities thus lowering the catalyst cost, without sacrificing high performance for photocatalytic hydrogen (H2) production from water. Here, we present a strategy to prepare titanium dioxide-bronze nanosheets (TiO2-BNS) and H2-reduced TiO2 nanosheets (TiO2- HRNS) synthesized, characterized, and applied for photocatalytic H2 production. Surprisingly, black TiO2-HRNS show complete photo inactivity, while the TiO2-BNS-Pt0.05 nanohybrid shows excellent H2 production rate with a very low loading of 0.05 wt % Pt. TiO2-BNS-Pt0.05 presents around 10 and 99 times higher photocatalytic rate than pristine TiO2-BNS under solar and 365 nm UV-LED light irradiation, respectively. Due to the 2D morphology and the presence of abundant coordinating sites, the successful formation of widely dispersed Pt SAs was achieved. Most excitingly, the in situ formation of surface-exposed defect sites (Ti3+) was observed for TiO2-BNS under light illumination, suggesting their significant role in enhancing the H2 production rate. This self-activation and amplification behavior of TiO2-BNS can be extended to other 2D systems and applied to other photocatalytic reactions, thus providing a facile approach for fully utilizing noble metal catalysts via the successful formation of SAs.Web of Scienc

Carbon dots detect water-to-ice phase transition and act as alcohol sensors via fluorescence turn-off/on mechanism

Highly fluorescent carbon nanoparticles called carbon dots (CDs) have been the focus of intense research due to their simple chemical synthesis, nontoxic nature, and broad application potential including optoelectronics, photocatalysis, biomedicine, and energy-related technologies. Although a detailed elucidation of the mechanism of their photoluminescence (PL) remains an unmet challenge, the CDs exhibit robust, reproducible, and environment-sensitive PL signals, enabling us to monitor selected chemical phenomena including phase transitions or detection of ultralow concentrations of molecular species in solution. Herein, we report the PL turn-off/on behavior of aqueous CDs allowing the reversible monitoring of the water-ice phase transition. The bright PL attributable to molecular fluorophores present on the CD surface was quenched by changing the liquid aqueous environment to solid phase (ice). Based on light-induced electron paramagnetic resonance (LEPR) measurements and density functional theory (DFT) calculations, the proposed kinetic model assuming the presence of charge-separated trap states rationalized the observed sensitivity of PL lifetimes to the environment. Importantly, the PL quenching induced by freezing could be suppressed by adding a small amount of alcohols. This was attributed to a high tendency of alcohol to increase its concentration at the CD/solvent interface, as revealed by all-atom molecular dynamics simulations. Based on this behavior, a fluorescence "turn-on" alcohol sensor for exhaled breath condensate (EBC) analysis has been developed. This provided an easy method to detect alcohols among other common interferents in EBC with a low detection limit (100 ppm), which has a potential to become an inexpensive and noninvasive clinically useful diagnostic tool for early stage lung cancer screening.Web of Science1546593658

Photocatalytic reduction of CO2 over Ti3+ self-doped TiO2-based nanomaterials

In this study, we explored the photocatalytic efficacy of Ti3+-doped TiO2-based photocatalysts for CO2 reduction. The Ti3+ self-doped photocatalysts were synthesized using a straightforward chemical reduction with sodium borohydride (NaBH4). Our investigation aimed to elucidate the intricate interplay between the synthesis process and the quantity of NaBH4 reductant on the physical-chemical and photocatalytic attributes of the defective TiO2-based photocatalysts. We explored three different commercially available TiO2 materials labeled P25, (S)TiO2, and KRONOClean7050, which were reduced (2 g of TiO2) with 0.75 and 1.5 g of NaBH4. The reduction with 0.75 g of NaBH4 led to a significant decrease of photocatalytic activity in all three cases. It was caused by clogging of the photocatalysts surface by sodium ions which resulted in the surface recombination of charge carriers. Oppositely, the reduction with 1.5 g of NaBH4, led to an increase of the photocatalytic activity with superior performance of KRONOClean7050. The comprehensive characterization of all the samples explained this superior performance of KC7050_RED_1.5 sample. Importantly, it did not contain any amorphous phase and the crystal size was two times higher compared to other 2 samples reduced by 1.5 g of NaBH4. In the addition to higher crystallinity, the formation of a disordered TiO2−x layer, enriched with Ti3+ defects and oxygen vacancies, was confirmed. These structural features enhance the light absorption and mitigate undesired recombination of photogenerated charge carriers. These results would trigger farther investigation of defect engineering towards enhancement of the efficiency of metal oxide photocatalysts

Carboxylated graphene for radical-assisted ultra-trace-level water treatment and noble metal recovery

Sorption technologies, enabling removal of heavy metals, play a pivotal role in meeting the global demands for unrestricted access to drinking water. Standard sorption technologies suffer from limited efficiency related to the weak sorbent-metal interaction. Further challenges include the development of technologies enabling smart metal recovery and sorbent regeneration. To this end, a densely functionalized graphene, with 33% by mass content of carboxyl groups, linked through direct C-C bonds (graphene acid, GA) represents a previously unexplored solution to this challenge. GA revealed excellent efficiency for removal of highly toxic metals, such as Cd2+ and Pb2+. Due to its selective chemistry, GA can bind heavy metals with high affinity, even at concentrations of 1 mg L-1 and in the presence of competing ions of natural drinking water, and reduce them down to drinking water allowance levels of a few mu g L-1. This is not only due to carboxyl groups but also due to the stable radical centers of the GA structure, enabling metal ion-radical interactions, as proved by EPR, XPS, and density functional theory calculations. GA offers full structural integrity during the highly acidic and basic treatment, which is exploited for noble metal recovery (Ga3+, In3+, Pd2+) and sorbent regeneration. Owing to these attributes, GA represents a fully reusable metal sorbent, applicable also in electrochemical energy technologies, as illustrated with a GA/Pt catalyst derived from Pt4+-contaminated water.Web of Science1523358334

Defect engineering over anisotropic brookite toward substrate-specific photo-oxidation of alcohols

Generally adopted strategies for enhancing the photocatalytic activity are aimed at tuning the visible light response, the exposed crystal facets, and the nanocrystal shape. Here, we present a different approach for designing efficient photocatalysts displaying a substrate-specific reactivity upon defect engineering. The platinized, defective anisotropic brookite TiO2 photocatalysts are tested for alcohol photoreforming showing up to an 11-fold increase in methanol oxidation rate, compared with the pristine one, while presenting much lower ethanol or isopropanol specific oxidation rates. We demonstrate that the substrate- specific alcohol oxidation and hydrogen evolution reactions are tightly related, and when the former is increased, the latter is boosted. The reduced anisotropic brookite shows up to 18-fold higher specific photoactivity with respect to anatase and brookite with isotropic nanocrystals. Advanced in situ characterizations and theoretical investigations reveal that controlled engineering over oxygen vacancies and lattice strain produces large electron polarons hosting the substratespecific active sites for alcohol photo-oxidation.Web of Science251190117