Nonlinear Multi-Frequency Converter Array for Vibration Energy Harvesting in Autonomous Sensors☆

Abstract This work proposes and experimentally validates a vibration energy harvester which combines the multi-frequency and nonlinear approaches into a converter array. The converter array consists of four piezoelectric cantilevers composed of ferromagnetic substrates with screen-printed lead zirconate titanate (PZT) layers coupled with a single permanent magnet elastically suspended on the array base in order to create a nonlinear behaviour. The presence of a moving magnet and the possibility to realize cantilevers with different potential curves can be useful to obtain a collective nonlinear behaviour due to strong coupling irrespective of the amplitude of the mechanical excitation, therefore increasing the overall effectiveness of the converter array. The experimental results confirm that combining cantilevers with different potential curves can be useful to obtain a collective bistable behaviour, therefore increasing the overall effectiveness of the converter array

Sensors and energy harvesters based on piezoelectric thick films

n/

Impact-Enhanced Multi-Beam Piezoelectric Converter for Energy Harvesting in Autonomous Sensors

AbstractThis work proposes and experimentally validates a piezoelectric vibration energy harvester, which exploits the impact of a central compliant driving beam onto two piezoelectric parallel bimorph beams on flexible steel. At suitable mechanical excitation conditions, the central driving beam impacts the piezo beams and triggers a nonlinear frequency-up conversion mechanism that improves the overall effectiveness, i.e. increases the overall rms output voltage and widens the equivalent bandwidth of the converter with respect to the condition of the noninteracting linear converters

Piezoelectric Resonant Sensors with Contactless Interrogation for Mass-Sensitive and Acoustic-Load Detection

n/

A Nonlinear Energy Harvester by Direct Printing Technology

n/

A new set of integrals of motion to propagate the perturbed two-body problem

A formulation of the perturbed two-body problem that relies on a new set of orbital elements is presented. The proposed method represents a generalization of the special perturbation method published by Peláez et al. (Celest Mech Dyn Astron 97(2):131?150,2007) for the case of a perturbing force that is partially or totally derivable from a potential. We accomplish this result by employing a generalized Sundman time transformation in the framework of the projective decomposition, which is a known approach for transforming the two-body problem into a set of linear and regular differential equations of motion. Numerical tests, carried out with examples extensively used in the literature, show the remarkable improvement of the performance of the new method for different kinds of perturbations and eccentricities. In particular, one notable result is that the quadratic dependence of the position error on the time-like argument exhibited by Peláez?s method for near-circular motion under the J2 perturbation is transformed into linear.Moreover, themethod reveals to be competitive with two very popular elementmethods derived from theKustaanheimo-Stiefel and Sperling-Burdet regularizations

QUBIC: the Q&U Bolometric Interferometer for Cosmology

The primordial B-mode polarisation of the Cosmic Microwave Background is the imprints of the gravitational wave background generated by inflation. Observing the B-mode is up to now the most direct way to constrain the physics of the primordial Universe, especially inflation. To detect these B-modes, high sensitivity is required as well as an exquisite control of systematics effects. To comply with these requirements, we propose a new instrument called QUBIC (Q and U Bolometric Interferometer for Cosmology) based on bolometric interferometry. The control of systematics is obtained with a close-packed interferometer while bolometers cooled to very low temperature allow for high sensitivity. We present the architecture of this new instrument, the status of the project and the self-calibration technique which allows accurate measurement of the instrumental systematic effects

QUBIC instrument for CMB polarization measurements

Measurements of cosmic microwave background (CMB) polarization may reveal the presence of a background of gravitational waves produced during cosmic inflation, providing thus a test of inflationary models. The Q&U Bolometric Interferometer for Cosmology (QUBIC) is an experiment designed to measure the CMB polarization. It is based on the novel concept of bolometric interferometry, which combines the sensitivity of bolometric detectors with the properties of beam synthesis and control of calibration offered by interferometers. To modulate and extract the input polarized signal of the CMB, QUBIC exploits Stokes polarimetry based on a rotating half-wave plate (HWP). In this work, we illustrate the design of the QUBIC instrument, focusing on the polarization modulation system, and we present preliminary results of beam calibrations and the performance of the HWP rotator at 300 K

QUBIC VI: cryogenic half wave plate rotator, design and performances

Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used technique is the Stokes Polarimetry that uses a rotating half-wave plate (HWP) and a linear polarizer to separate and modulate the polarization components with low residual cross-polarization. This paper describes the QUBIC Stokes Polarimeter highlighting its design features and its performances. A common systematic with these devices is the generation of large spurious signals synchronous with the rotation and proportional to the emissivity of the optical elements. A key feature of the QUBIC Stokes Polarimeter is to operate at cryogenic temperature in order to minimize this unwanted component. Moving efficiently this large optical element at low temperature constitutes a big engineering challenge in order to reduce friction power dissipation. Big attention has been given during the designing phase to minimize the differential thermal contractions between parts. The rotation is driven by a stepper motor placed outside the cryostat to avoid thermal load dissipation at cryogenic temperature. The tests and the results presented in this work show that the QUBIC polarimeter can easily achieve a precision below 0.1{\deg} in positioning simply using the stepper motor precision and the optical absolute encoder. The rotation induces only few mK of extra power load on the second cryogenic stage (~ 8 K).Comment: Part of a series of 8 papers on QUBIC to be submitted to a special issue of JCA