Characterisation of untreated and treated biodegradable wastes

As part of a Defra sponsored project (WRT220), approximately 40 biodegradable wastes were characterised according to biodegradability (DR4 and BM100), total PTE content, C:N ratio and biochemical composition. Two leaching tests were employed; upflow percolation test and a one step LS10 test; eluates were analysed for TOC, pH, electrical conductivity, PTEs and a range of cations and anions. This paper contains a limited set of data for a selection of untreated and treated waste types representing four waste treatment processes (composting, MBT, MHT, anaerobic digestion). The DR4 and BM100 tests were found to be appropriate for a wide range of waste types but where possible they should be used in conjunction with other related tests. Longer-term MBT composting processes appeared to produce compost material with reduced ammonium concentrations and extractability of some PTEs. Carbon content (carbon analyzer - LECO) could be estimated as C = LOI/1.9 which is a routine operation. N LECO values were approximately 12% greater than the equivalent N Kjeldahl values

Application of DR4 and BM100 Biodegradability tests to treated and untreated organic wastes

The aerobic DR4 and anaerobic BM100 biodegradability tests are currently applied in England and Wales for monitoring the reduction in biological municipal waste (BMW) achieved by mechanical biological treatment (MBT) plants (Environment Agency 2005). The protocol is applied only when outputs are landfilled and is based on estimating the reduction in potential biogas production between the MBT input, municipal solid waste (MSW), and all of the landfilled outputs, using the BM100 test. As this is a long term 100 day test the more rapid 4 day DR4 test may also be applied as this has been shown to correlate with the BM100 test. We have now applied the DR4 and BM100 tests to 132 organic waste samples including untreated and treated BMW and specific organic wastes. The results indicate that the correlation between the DR4 and BM100 tests has proved valid for mixed MSW derived BMW wastes. However when both tests are applied to specific organic wastes such as turkey feathers, cardboard packaging waste and pizza food wastes the correlation between the tests is less strong. It is concluded that the use of the DR4 and BM100 test correlation is valid for its designed application (monitoring MBT processes treating MSW derived mixed BMW), but that caution should be exercised when applying both tests to specific single component organic wastes

Does size matter? The benefits and challenges of voluntary sector partnerships in dementia service provision for South Asian communities in England

YesIn response to the need for improved access to dementia services for minority ethnic communities, the Alzheimer’s Society piloted, in 2014, the Information Programme for South Asian Families (IPSAF), an adapted version of its existing course for carers. It delivered this in partnership with local black and minority ethnic community and faith organisations, a new approach for the Alzheimer’s Society. In most cases, the partnerships formed were strong and effective, and have given rise to ongoing plans for joint working that bring benefits to both the local organisations and the Alzheimer’s Society. However, the current realities of UK voluntary and community sector dynamics raise questions of ownership and issues around how to establish genuine partnerships. In this article, we reflect on what the IPSAF experience indicates about the potential for equitable partnerships between small and large organisations, and draw out lessons for building effective, mutually beneficial relationships

Optimal piston crevice study in a rapid compression machine

Multi-dimensional effects such as vortex generation and heat losses from the gas to the wall of the reactor chamber have been an issue to obtaining a reliable RCM data. This vortex initiates a flow in the relatively cold boundary layer, which may penetrate the core gas. This resulting non-uniformity of the core region could cause serious discrepancies and give unreliable experimental data. To achieve a homogenous temperature field, an optimised piston crevice was designed using CFD modelling (Ansys fluent). A 2-Dimensional computational moving mesh is assuming an axisymmetric symmetry. The model adopted for this calculation is the laminar flow model and the fluid used was nitrogen. To get the appropriate crevice volume suitable for the present design, an optimisation of the five different crevice volume was modelled which resulted to about 2-10% of the entire chamber volume. The use of creviced piston has shown to reduce the final compressed gas temperature and pressure in the reactor chamber. All the crevice volumes between 2-10% of the chamber volume adequately contained the roll up vortexes, but the crevice volume of 282 mm 3 was chosen to be the best in addition to minimising the end gas pressure and temperature drop. The final pressure trace from experiment shows a reasonable agreement with the CFD model at compression and post compression stage

Energy consumption and capacity utilization of galvanizing furnaces

An explicit equation leading to a method for improving furnace efficiency is presented. This equation is dimensionless and can be applied to furnaces of any size and fuel type for the purposes of comparison. The implications for current furnace design are discussed. Currently the technique most commonly used to reduce energy consumption in galvanizing furnaces is to increase burner turndown. This is shown by the analysis presented here actually to worsen the thermal efficiency of the furnace, particularly at low levels of capacity utilization. Galvanizing furnaces are different to many furnaces used within industry, as a quantity of material (in this case zinc) is kept molten within the furnace at all times, even outside production periods. The dimensionless analysis can, however, be applied to furnaces with the same operational function as a galvanizing furnace, such as some furnaces utilized within the glass industry. © IMechE 2004

Lipid droplet detection by the cavity perturbation method

There are currently no point-of-care diagnosis strategies available to indicate the presence of neoplasmic growth. This research aims to develop a novel diagnostic strategy based on detecting TAG accumulation in cells. This element of the research is a preliminary experiment to prove the concept of detecting TAG lipid droplets in YEPD media. It was found that a change in mono-unsaturated concentration can be detected by the frequency shift in a resonant cavity. The dielectric constant of TAG vegetable oils was calculated at 2.34-2.39. It was also found that concentrations of lipid droplet can be differentiated up to 5% (v/v)

Can changes in population mixing and socio-economic deprivation in Cumbria, England explain changes in cancer incidence around Sellafield?

Previously excesses in incident cases of leukaemia and non-Hodgkin lymphoma have been observed amongst young people born or resident in Seascale, Cumbria. These excesses have not been seen more recently. It is postulated that the former apparent increased risk was related to ‘unusual population mixing’, which is not present in recent years. This study investigated changes in measures of population mixing from 1951-2001. Comparisons were made between three specified areas. Area-based measures were calculated (migration, commuting, deprivation, population density). All areas have become more affluent, although Seascale was consistently the most affluent. Seascale has become less densely populated, with less migration into the ward and less diversity with respect to migrants’ origin. There have been marked changes in patterns of population mixing throughout Cumbria. Lesser population mixing has been observed in Seascale in recent decades. Changes in pattern and nature of population mixing may explain the lack of recent excesses

Detrital zircon geochronology of pre-Tertiary strata in the Tibetan-Himalayan orogen

Detrital zircon data have recently become available from many different portions of the Tibetan-Himalayan orogen. This study uses 13,441 new or existing U-Pb ages of zircon crystals from strata in the Lesser Himalayan, Greater Himalayan, and Tethyan sequences in the Himalaya, the Lhasa, Qiangtang, and Nan Shan-Qilian Shan-Altun Shan terranes in Tibet, and platformal strata of the Tarim craton to constrain changes in provenance through time. These constraints provide information about the paleogeographic and tectonic evolution of the Tibet-Himalaya region during Neoproterozoic to Mesozoic time. First-order conclusions are as follows: (1) Most ages from these crustal fragments are <1.4 Ga, which suggests formation in accretionary orogens involving little pre-mid-Proterozoic cratonal material; (2) all fragments south of the Jinsa suture evolved along the northern margin of India as part of a circum-Gondwana convergent margin system; (3) these Gondwana-margin assemblages were blanketed by glaciogenic sediment during Carboniferous-Permian time; (4) terranes north of the Jinsa suture formed along the southern margin of the Tarim-North China craton; (5) the northern (Tarim-North China) terranes and Gondwana-margin assemblages may have been juxtaposed during mid-Paleozoic time, followed by rifting that formed the Paleo-Tethys and Meso-Tethys ocean basins; (6) the abundance of Permian-Triassic arc-derived detritus in the Lhasa and Qiangtang terranes is interpreted to record their northward migration across the Paleo- and Meso-Tethys ocean basins; and (7) the arrival of India juxtaposed the Tethyan assemblage on its northern margin against the Lhasa terrane, and is the latest in a long history of collisional tectonism. Copyright 2011 by the American Geophysical Union

Countering the Australian 'ndrangheta: The criminalisation of mafia behaviour in Australia between national and comparative criminal law

Mafia-type criminal groups belonging to, or originated from, the Calabrian ‘ndrangheta from Southern Italy, have been object of recent academic research and media attention in Australia. The Australian ‘ndrangheta, as qualified form of organised crime, poses new challenges for law enforcement in the country. This paper briefly looks at the strategies to fight organised crime in Australia, with specific focus on anti-association laws. By using a comparative approach, the paper will look at the criminalisation of mafias as qualified forms of organised crime in other two jurisdictions, Italy and the USA, to advocate for an effective mafia criminalisation in Australia. In conclusion, this paper will argue that, in order to also fight mafia phenomena, criminal law in Australia should focus on behaviours of organised crime groups rather than only on the criminalisation of proscribed associations and their illegal activities

Great art for everyone? Engagement and participation policy in the arts

New Labour began its administration with a commitment to bring democracy to culture. However, a decade later the Arts Council England (ACE)'s mission statement of "Great art for everyone" suggested a continued emphasis on access to mainstream culture rather than on cultural democracy. The argument in this paper is that Labour's vision has resulted in little change to the basis upon which arts institutions receive regular funding, or the social composition of those who participate in the arts in Britain today - who remain predominantly white and middle class. Public consultation through The arts debate provides evidence that the arts are still perceived as elitist, and policy too insular and self-reflective. The report clearly identified the public's desire for not only greater transparency in decisionmaking processes but also involvement in the decisions themselves, in order to democratise the arts. This paper draws on research investigating the extent to which participatory decisionmaking schemes affect cultural democracy and the subsequent impact on artistic policy and practice. In addition to documentary analysis, this study involved interviews with policymakers, practitioners and the public, focusing on two projects using participatory decision-making in England. © 2011 Copyright Taylor and Francis Group, LLC