Strategien zur Minimierung des Einsatzes kupferhaltiger Fungizide bei der Krautfäulebekämpfung im Ökologischen Kartoffelanbau – ein vom Bundesprogramm Ökologischer Landbau gefördertes Forschungsprojekt

Ziel des Projektes ist es, auf Basis der witterungsbedingten Epidemiebewertung, die Kupferaufwandmengen auf das absolut notwendige Maß zu begrenzen. Dazu werden verschiedene Strategien verfolgt. Zum einen soll durch eine Pflanzgutbeizung mit Kupferpräparaten das Auftreten von Primärbefall reduziert werden, um den Epidemiebeginn und somit auch den Spritzstart nach hinten verlagern zu können. Zum andern werden zur Kontrolle des Sekundärbefalls Applikationsstrategien erarbeitet, bei denen die Kupferaufwandmengen und die Spritzabstände variabel an den Infektionsdruck angepasst werden, um mit möglichst niedrigeren Mengen auszukommen

Strategien zur Reduzierung der Kupferaufwandmengen im ökologischen Kartoffelanbau – Projekt “ÖKO-SIMPHYT“

Potato late blight (Phytophthora infestans) is still an unsolved problem in organic farming. Up to now the disease can only be controlled by copper fungicides. Our project is aiming to reduce the application of copper-containing fungicides by introduc-tion of the new blight forecasting system “ÖKO-SIMPHYT” based on meteorological parameters. Primary stem infections should be reduced by seed treatment with copper fungicides thus to postpone the beginning of the blight epidemic as well as the start of spraying. To control secondary infections on the foliage, fungicide strategies should be elaborated to achieve best efficacy with reduced amounts of copper. Therefore copper amounts and spraying intervals should be adjusted to the infection pressure. Based on the biological and epidemiological conditions for primary and secondary infections the new developed potato blight forecast system ÖKO-SIMPHYT should be optimized

Kupferminimierungsstrategien im ökologischen Kartoffelanbau – Projekt “ÖKO-SIMPHYT“: Erste Erfahrungen aus dem norddeutschen Freiland

In the research project „ÖKO-SIMPHYT“ different strategies are tested to reduce the copper application for Phytophthora infestans in organic potato cultivation. Within the first two years of our research a reduction of the total amount of copper per hectare could be accomplished when applying the new developed forecast system ÖKO-SIMPHYT. With this decision support system a reduction of copper up to 46% was possible, when the infection pressure was relatively low. These first results have now to be proven under high infection pressure conditions. Experiments were carried out in the greenhouse to test the rain stability of copper and contacting agents. It could be proved that precipitation of 30 mm is able to reduce the degree of a copper treatment by up to 25%

Solvent extraction studies of coprocessing flowsheets: Results from Campaign 6 of the Solvent Extraction Test Facility (SETF)

A series of five solvent extraction tests were made in the Solvent Extraction Test Facility (SETF) during Campaign 6. Each test used a coprocessing flowsheet that included coextraction-coscrubbing of the heavy metals followed by partial partitioning of the uranium and plutonium into separate uranium and uranium-plutonium products. The separation of the uranium and plutonium was aided by the addition of HNO{sub 2} to the organic backscrub stream. Two of these tests compared the performance of the traditional Purex solvent, tri-n-butyl phosphate (TBP), with a potential replacement, tri-2-ethylhexyl phosphate (TEHP). The remaining three tests were made with a chemically-degraded TBP solvent to compare the effectiveness of two solvent cleanup methods - treatment with silica gel or scrubbing with sodium carbonate and water

Groundwater contamination by trichloroethene (TCE) in a residential area of Perth: Distribution, mobility, and implications for management

Substantial TCE and ammonia contamination was detected in groundwater beneath a residential area in Perth. Investigation has successfully determined broad aspects of the extent of the TCE plume and its impact. The plume extends approximately 900 m in groundwater downgradient of an industrial area. The contamination is about 300 m wide and 6 - 8 m thick. A peak concentration of 2000 ugL{-1} TCE was measured. The mobility of the plume and the residence time for the contamination in the sand aquifer are estimated based on the groundwater velocities and retardation factors. Biological or chemical transformation of TCE cannot be excluded, although no transformation products have been found in a small portion of the plume. Currently no remediation of the contaminated site is planned. An approach for managing the contamination is presented and important issues for future remediation options for TCE contaminated sites in Perth are discussed

Groundwater contamination by trichloroethene (TCE) in a residential area of Perth: Distribution, mobility, and implications for management

Substantial TCE and ammonia contamination was detected in groundwater beneath a residential area in Perth. Investigation has successfully determined broad aspects of the extent of the TCE plume and its impact. The plume extends approximately 900 m in groundwater downgradient of an industrial area. The contamination is about 300 m wide and 6 - 8 m thick. A peak concentration of 2000 ugL{-1} TCE was measured. The mobility of the plume and the residence time for the contamination in the sand aquifer are estimated based on the groundwater velocities and retardation factors. Biological or chemical transformation of TCE cannot be excluded, although no transformation products have been found in a small portion of the plume. Currently no remediation of the contaminated site is planned. An approach for managing the contamination is presented and important issues for future remediation options for TCE contaminated sites in Perth are discussed

Solvent extraction studies of coprocessing flowsheets: results from Campaign 5 of the Solvent Extraction Test Facility (SETF)

In Campaign 5, fast breeder reactor (FBR) fuel [average burnup {similar_to}2.6 TJ/kg ({similar_to}30,000 MWd/t)] was processed for the first time. Operations in a single extraction cycle with 30% TBP-NPH were satisfactory with low heavy-metal losses (< 0.02%) and high decontamination factors (DFs > 1000) for all fission products except {sup 95}Zr, which exhibited moderate DFs (180 and 750, respectively, in two runs). The use of a split scrub stream (0.5 M and 3 M HNO{sub 3}) vs a single scrub stream (3 M HNO{sub 3}) resulted in the higher DF. An extractant backscrubbing stream was not needed to produce partially partitioned uranium-plutonium products containing 30 to 35% plutonium when processing the core FBR fuel (22% Pu). The necessary enrichment factor ({similar_to}1.5) was attained by maintaining the temperature at 25 to 30{sup 0}C in partial partitioning and adjusting the relative flow rates of the aqueous and organic phases. The plutonium recovery in the two runs ({similar_to}400 g) was purified by anion exchange and converted to PuO{sub 2} for fuel refabrication studies. 8 references, 7 figures, 6 tables

The Influence of Chemical and Mineral Compositions on the Parameterization of Immersion Freezing by Volcanic Ash Particles

Volcanic ash (VA) from explosive eruptions contributes to aerosol loadings in the atmosphere. Aside from the negative impact of VA on air quality and aviation, these particles can alter the optical and microphysical properties of clouds by triggering ice formation, thereby influencing precipitation and climate. Depending on the volcano and eruption style, VA displays a wide range of different physical, chemical, and mineralogical properties. Here, we present a unique data set on the ice nucleation activity of 15 VA samples obtained from different volcanoes worldwide. The ice nucleation activities of these samples were studied in the Aerosol Interaction and Dynamics in the Atmosphere (AIDA) cloud simulation chamber as well as with the Ice Nucleation Spectrometer of the Karlsruhe Institute of Technology (INSEKT). All VA particles nucleated ice in the immersion freezing mode from 263 to 238K with ice nucleation active site (INAS) densities ranging from ∼10$^{5}$ to 10$^{11}$ m$^{-2}$, respectively. The variabilities observed among the VA samples, at any given temperature, range over 3.5 orders of magnitude. The ice-nucleating abilities of VA samples correlate to varying degrees with their bulk pyroxene and plagioclase contents as a function of temperature. We combined our new data set with existing literature data to develop an improved ice nucleation parameterization for natural VA in the immersion freezing mode. This should be useful for modeling the impact of VA on clouds

Solvent extraction studies with intermediate-burnup Fast Flux Test Facility fuel in the Solvent Extraction Test Facility

In Campaign 8, two batches of irradiated fuel from the Fast Flux Test Facility (FFTF) were processed, using 30% TBP-NPH, in the Solvent Extraction Test Facility (SETF). The burnups were about 36 and 55 MWd/kg with 1.3- and 1-year cooling times, respectively. The latter fuel had the highest burnup and shortest cooling time of any fuel ever handled in the SETF. No major problems were noted during the operation of the mixer-settlers, and low uranium and plutonium losses (<0.02%) were achieved. Zirconium and ruthenium decontamination factors (DFs) were improved by increasing the number of scrub stages and increasing the peak solvent loading in the coextraction-coscrub bank. The use of an in-line photometer to measure the uranium and plutonium concentrations in a process stream permitted high solvent loadings of heavy metals to be achieved in the extraction bank while maintaining low losses to the aqueous raffinate. The investigation of two flowsheet options for making separate uranium and plutonium products (organic backscrub and selective uranium extraction) that was started in Campaign 7 was continued. High-quality products were again obtained (uranium and plutonium DFs of {similar_to}0{sup 4}). Plutonium reoxidation was still extensive even though hydrazine was added to the aqueous strip for the organic backscrub flowsheet. Two different plutonium oxalate precipitation procedures [Pu(III) and Pu(IV)] were used in the preparation of the plutonium oxide products; this was done so that the fuel fabrication characteristics of the oxide from the two procedures could be compared. A total of {similar_to}50 g of plutonium was recovered and shipped to the fuel refabrication program

Solvent extraction studies of coprocessing flowsheets: results from campaigns 3 and 4 of the Solvent-Extraction Test Facility (SETF)

Experiments on tri-n-butyl phosphate solvent extraction of uranium and plutonium at full activity levels (Campaigns 3 and 4) were conducted in the Solvent Extraction Test Facility (SETF), located in one of the heavily shielded cells of the Transuranium Processing Plant. The primary objectives were: (1) to demonstrate and evaluate the first two cycles of the Hot Engineering Facility flowsheets (codecontamination and partial partitioning), and (2) to investigate and evaluate the use of HNO{sub 2} as the reductant for tetravalent plutonium during reductive stripping operations. Secondary objectives were to determine the solvent extraction behavior of feed solutions prepared by dissolving fuel from a boiling water reactor (BWR) and to improve the solvent extraction feed clarification