Design of 12.5 kA current leads for the Large Hadron Collider using high temperature superconductor material

The Large Hadron Collider will be equipped with about 8000 superconducting magnets. Some 2600 current leads will feed the currents ranging from 25 to 12500 A. CERN aims to reduce the consumption of liquid helium, using high temperature superconductors in these leads. A development of leads for 12.5 kA is being conducted in collaboration with Oxford Instruments. The design options for these leads are described. A test rig and prototype lead have been made according to one of the options. Electrical contact tests are in progress on BSCCO-2212 and YBCO-123 samples. In the first run, the prototype carried 13000 A

Company ‘Emigration’ and EC Freedom of Establishment: Daily Mail Revisited

Following the ECJ’s recent case law on EC freedom of establishment (the Centros, Überseering and Inspire Art cases), regulatory competition for corporate law within the European Union takes place at an early stage of the incorporation of new companies. In contrast, as regards the ‘moving out’ of companies from the country of incorporation, the ECJ once considered a tax law restriction against the transfer abroad of a company’s administrative seat as compatible with EC freedom of establishment (the Daily Mail case). For years, this decision has been regarded as applicable to all restrictions imposed by countries of incorporation, even the forced liquidation of the ‘emigrating’ company. This paper addresses the question whether EC freedom of establishment really allows Member States to place any limit on the ‘emigration’ of nationally registered companies. It argues that EC freedom of establishment covers the transfer of the administrative seat as well as the transfer of the registered office and, therefore, that the country of incorporation cannot liquidate ‘emigrating’ companies. In addition, it addresses the question whether a new Directive is needed to allow the transfer of a com- pany’s registered office and the identity-preserving company law changes. It argues that such a Directive is necessary to avoid legal uncertainty and to protect the interests of employees, creditors and minority shareholders, among others, who could be detrimentally affected by the ‘emigration’ of national companies

Second-Generation Coil Design of the Nb3Sn low-β Quadrupole for the High Luminosity LHC

As part of the Large Hadron Collider (LHC) Luminosity upgrade program, the U.S.-LHC Accelerator Research Program collaboration and CERN are working together to design and build a 150-mm aperture Nb3Sn quadrupole for the LHC interaction regions. A first series of 1.5-m-long coils was fabricated and assembled in a first short model. A detailed visual inspection of the coils was carried out to investigate cable dimensional changes during heat treatment and the position of the windings in the coil straight section and in the end region. The analyses allow identifying a set of design changes which, combined with a fine tune of the cable geometry and a field quality optimization, were implemented in a new second-generation coil design. In this paper, we review the main characteristics of the first generation coils, describe the modification in coil layout and discuss their impact on parts design and magnet analysis

Progress on HL-LHC Nb3Sn Magnets

The high-luminosity Large Hadron Collider (HL-LHC) project aims at allowing to increase the collisions in the LHC by a factor of ten in the decade 2025-2035. One essential element is the superconducting magnet around the interaction region points, where the large aperture magnets will be installed to allow to further reduce the beam size in the interaction point. The core of this upgrade is the Nb Sn triplet, made up of 150-mm aperture quadrupoles in the range of 7-8 m. The project is being shared between the European Organization for Nuclear Research and the US Accelerator Upgrade Program, based on the same design, and on the two strand technologies. The project is ending the short model phase, and entering the prototype construction. We will report on the main results of the short model program, including the quench performance and field quality. A second important element is the 11 T dipole that replaces a standard dipole making space for additional collimators. The magnet is also ending the model development and entering the prototype phase. A critical point in the design of this magnet is the large current density, allowing increase of the field from 8 to 11 T with the same coil cross section as in the LHC dipoles. This is also the first two-in-one Nb Sn magnet developed so far. We will report the main results on the test and the critical aspects. 3

Conceptual Design of the LHC Interaction Region Upgrade: Phase-I

The LHC is starting operation with beam. The primary goal of CERN and the LHC community is to ensure that the collider is operated efficiently and that it achieves nominal performance in the shortest term. Since several years the community has been discussing the directions for maximizing the physics reach of the LHC by upgrading the experiments, in particular ATLAS and CMS, the LHC machine and the CERN proton injector complex, in a phased approach. The first phase of the LHC interaction region upgrade was approved by Council in December 2007. This phase relies on the mature Nb-Ti superconducting magnet technology with the target of increasing the LHC luminosity to 2 to 3 10^34 cm^-2s^-1, while maximising the use of the existing infrastructure. In this report, we present the goals and the proposed conceptual solutions for the LHC IR Upgrade Phase-I which include the recommendations of the conceptual design review

Performance of the Superconducting Corrector Magnet Circuits during the Commissioning of the LHC

The LHC is a complex machine requiring more than 7400 superconducting corrector magnets distributed along a circumference of 26.7 km. These magnets are powered in 1446 different electrical circuits at currents ranging from 60 A up to 600 A. Among the corrector circuits the 600 A corrector magnets form the most diverse and differentiated group. All together, about 60000 high current connections had to be made. A fault in a circuit or one of the superconducting connections would have severe consequences for the accelerator operation. All magnets are wound from various types of Nb-Ti superconducting strands, and many contain parallel protection resistors to by-pass the current still flowing in the other magnets of the same circuit when they quench. In this paper the performance of these magnet circuits is presented, focussing on the quench behaviour of the magnets. Quench detection and the performance of the electrical interconnects will be dealt with. The results as measured on the entire circuits are compared to the test results obtained at the reception of the individual magnets

Performance of the Main Dipole Magnet Circuits of the LHC during Commissioning

During hardware commissioning of the Large Hadron Collider (LHC), 8 main dipole circuits are tested at 1.9 K and up to their nominal current. Each dipole circuit contains 154 magnets of 15 m length, and has a total stored energy of up to 1.3 GJ. All magnets are wound from Nb-Ti superconducting Rutherford cables, and contain heaters to quickly force the transition to the normal conducting state in case of a quench, and hence reduce the hot spot temperature. In this paper the performance of the first three of these circuits is presented, focussing on quench detection, heater performance, operation of the cold bypass diodes, and magnet-to-magnet quench propagation. The results as measured on the entire circuits will be compared to the test results obtained during the reception tests of the individual magnets

Regulation of microRNA biogenesis and turnover by animals and their viruses

Item does not contain fulltextMicroRNAs (miRNAs) are a ubiquitous component of gene regulatory networks that modulate the precise amounts of proteins expressed in a cell. Despite their small size, miRNA genes contain various recognition elements that enable specificity in when, where and to what extent they are expressed. The importance of precise control of miRNA expression is underscored by functional studies in model organisms and by the association between miRNA mis-expression and disease. In the last decade, identification of the pathways by which miRNAs are produced, matured and turned-over has revealed many aspects of their biogenesis that are subject to regulation. Studies in viral systems have revealed a range of mechanisms by which viruses target these pathways through viral proteins or non-coding RNAs in order to regulate cellular gene expression. In parallel, a field of study has evolved around the activation and suppression of antiviral RNA interference (RNAi) by viruses. Virus encoded suppressors of RNAi can impact miRNA biogenesis in cases where miRNA and small interfering RNA pathways converge. Here we review the literature on the mechanisms by which miRNA biogenesis and turnover are regulated in animals and the diverse strategies that viruses use to subvert or inhibit these processes