Seismic vulnerability reduction: numerical modeling of FRP reinforcement using multifiber beams elements

This paper presents a simplified modeling strategy for reproducing the behavior of beam-column structures reinforced with Polymer Reinforced Fibers (FRP). A 1D concrete constitutive model has been recently proposed, suitable for both monotonic and cycling loadings. The model is inspired on two well-known concrete laws, one based on damage mechanics theory (La Borderie concrete damage model) and one based on experimental studies (Eid & Paultre's confined concrete model). Spatial discretization is done using multifiber Timoshenko beam elements. Validation of the strategy is provided using two case studies: a retrofitted bridge pier and a vulnerability analysis on an existing building

A Data-Driven Design Evaluation Tool for Handheld Device Soft Keyboards

Thumb interaction is a primary technique used to operate small handheld devices such as smartphones. Despite the different techniques involved in operating a handheld device compared to a personal computer, the keyboard layouts for both devices are similar. A handheld device keyboard that considers the physical capabilities of the thumb may improve user experience. We developed and applied a design evaluation tool for different geometries of the QWERTY keyboard using a performance evaluation model. The model utilizes previously collected data on thumb motor performance and posture for different tap locations and thumb movement directions. We calculated a performance index (PITOT, 0 is worst and 2 is best) for 663 designs consisting in different combinations of three variables: the keyboard's radius of curvature (R) (mm), orientation (O) (°), and vertical location on the screen (L). The current standard keyboard performed poorly (PITOT = 0.28) compared to other designs considered. Keyboard location (L) contributed to the greatest variability in performance out of the three design variables, suggesting that designers should modify this variable first. Performance was greatest for designs in the middle keyboard location. In addition, having a slightly upward curve (R = −20 mm) and orientated perpendicular to the thumb's long axis (O = −20°) improved performance to PITOT = 1.97. Poorest performances were associated with placement of the keyboard's spacebar in the bottom right corner of the screen (e.g., the worst was for R = 20 mm, O = 40°, L = Bottom (PITOT = 0.09)). While this evaluation tool can be used in the design process as an ergonomic reference to promote user motor performance, other design variables such as visual access and usability still remain unexplored

Retrofitting reinforced concrete structures with FRP: Numerical simulations using multifiber beam elements

In structural engineering, seismic vulnerability reduction of existing structures is a crucial issue. External reinforcement by Polymer Reinforced Fibers (FRP) is an interesting tool in order to fulfill this aim. However, the use of FRP reinforcement as a retrofitting method is limited, one of the reasons being the lack of predicting numerical tools for cyclic loading. This paper presents a method to predict the behavior of beam-column structures considering the FRP reinforcement effect. It describes the construction of a 1D concrete constitutive model suitable for monotonic and cycling loadings. The model is inspired on two well-known concrete models, the first one based on the damage mechanics theory (La Borderie concrete damage model), and the second one based on experimental studies (Eid & Paultre's confined concrete model). Validation of the approach is done using experimental results on reinforced concrete beam and columns submitted to axial and flexural cyclic loading. The proposed method deals also with steel bar rupture considering low cycle fatigue effects. All the simulations are done using multifiber Timoshenko beam elements

High efficacy and low toxicity of weekly docetaxel given as first-line treatment for metastatic breast cancer

Background: Docetaxel is one of the most effective antitumor agents currently available for the treatment of metastatic breast cancer (MBC). This phase II multicenter study prospectively analyzed the efficacy and toxicity of docetaxel given on a weekly schedule as first-line treatment of metastatic breast cancer. Patients and Methods: All patients received docetaxel, 35 mg/m(2) weekly for 6 weeks, followed by 2 weeks of rest. Subsequent cycles ( 3 weeks of treatment, 2 weeks of rest) were given until a maximum of 5 cycles or disease progression. Premedication consisted of 8 mg dexamethasone intravenously 30 min prior to the infusion of docetaxel. Results: Fifty-four patients at a median age of 58 years with previously untreated MBC were included in the study. A median of 10 doses ( median cumulative dose 339 mg/m(2)) was administered ( range: 2 - 18). The overall response rate was 48.1% ( 95% CI: 34 - 61%, intent-to-treat). Median survival was 15.8 months and median time to progression was 5.9 months ( intent-to-treat). Hematological toxicity was mild with absence of neutropenia-related complications. Grade 3 neutropenia was observed in 3.7% of patients and grade 3 and 4 anemia was observed in 5.6 and 1.9% of patients, respectively. Conclusion: The weekly administration of docetaxel is highly efficient and safe as first-line treatment for MBC and may serve as an important treatment option specifically in elderly patients and patients with a reduced performance status. Copyright (C) 2005 S. Karger AG, Basel

On high-temperature evolution of passivation layer in Li–10 wt % Mg alloy via in situ SEM-EBSD

Li–10 wt % Mg alloy (Li–10 Mg) is used as an anode material for a solid-state battery with excellent electrochemical performance and no evidence of dendrite formation during cycling. Thermal treatment of Li metal during manufacturing improves the interfacial contact between a Li metal electrode and solid electrolyte to achieve an all solid-state battery with increased performance. To understand the properties of the alloy passivation layer, this paper presents the first direct observation of its evolution at elevated temperatures (up to 325°C) by in situ scanning electron microscopy. We found that the morphology of the surface passivation layer was unchanged above the alloy melting point, while the bulk of the material below the surface was melted at the expected melting point, as confirmed by in situ electron backscatter diffraction. In situ heat treatment of Li-based materials could be a key method to improve battery performance

The preferred movement path paradigm: influence of running shoes on joint movement

PURPOSE: (a) to quantify differences in lower extremity joint kinematics for groups of runners subjected to different running footwear conditions, and (b) to quantify differences in lower extremity joint kinematics on an individual basis for runners subjected to different running footwear conditions. METHODS: Three-dimensional ankle and knee joint kinematics were collected for 35 heel-toe runners when wearing three different running shoes and when running barefoot. Absolute mean differences in ankle and knee joint kinematics were computed between running shoe conditions. The percentage of individual runners who displayed differences below a 2°, 3° and 5° threshold were also calculated. RESULTS: The results indicate that the mean kinematics of the ankle and knee joints were similar between running shoe conditions. Aside from ankle dorsi-flexion and knee flexion, the percentage of runners maintaining their movement path between running shoes (i.e. less than 3°) was in the order of magnitude of about 80 to 100%. Many runners showed ankle and knee joint kinematics that differed between a conventional running shoe and barefoot by more than 3°, especially for ankle dorsiflexion and knee flexion CONCLUSION: Many runners stay in the same movement path (the preferred movement path) when running in various different footwear conditions. The percentage of runners maintaining their preferred movement path depends on the magnitude of the change introduced by the footwear condition

A Membrane Process for Recycling Die Lube from Wastewater Solutions

An active-surface membrane technology was used to separate a die lube manufacturing wastewater stream consisting of various oils, hydrocarbons, heavy metals, and silicones. The ultrafiltration membranes reduced organics from initial oil and grease contents by 20�25X, carbon oxygen demand (COD) by 1.5 to 2X, and total organic carbon (TOC) by 0.6, while the biological oxygen demand (BOD) remained constant. The active-surface membranes were not fouled as badly as non-active-surface systems and the active-surface membrane flux levels were consistently higher and more stable than those of the non-active-surface membranes tested. Field testing demonstrated that the rotary microfilter can concentrate the die lube, i.e. remove the glycerin component, and produce a die lube suitable for recycling. The recycling system operated for six weeks with only seven cleaning cycles and no mechanical or electrical failures. Test data and quality records indicate that the die casting scrap was reduced from 8.4 to 7.8%. There is no doubt that this test yielded tremendous results. This separation process presents significant opportunities that can be evaluated further

Phenomenological model for the remanent magnetization of dilute quasi-one-dimensional antiferromagnets

We present a phenomenological model for the remanent magnetization at low temperatures in the quasi-one-dimensional dilute antiferromagnets CH_{3}NH_{3}Mn_{1-x}Cd_{x} Cl_{3}\cdot 2H_{2}O and (CH_{3})_{2}NH_{2}Mn_{1-x}Cd_{x}Cl_{3}\cdot 2H_{2}O. The model assumes the existence of uncompensated magnetic moments induced in the odd-sized segments generated along the Mn(^{2+}) chains upon dilution. These moments are further assumed to correlate ferromagnetically after removal of a cooling field. Using a (mean-field) linear-chain approximation and reasonable set of model parameters, we are able to reproduce the approximate linear temperature dependence observed for the remanent magnetization in the real compounds.Comment: 5 pages, 2 figures; final version to appear in Physical Review

Fourier and Gegenbauer expansions for a fundamental solution of the Laplacian in the hyperboloid model of hyperbolic geometry

Due to the isotropy $d$-dimensional hyperbolic space, there exist a spherically symmetric fundamental solution for its corresponding Laplace-Beltrami operator. On the $R$-radius hyperboloid model of $d$-dimensional hyperbolic geometry with $R>0$ and $d\ge 2$, we compute azimuthal Fourier expansions for a fundamental solution of Laplace's equation. For $d\ge 2$, we compute a Gegenbauer polynomial expansion in geodesic polar coordinates for a fundamental solution of Laplace's equation on this negative-constant sectional curvature Riemannian manifold. In three-dimensions, an addition theorem for the azimuthal Fourier coefficients of a fundamental solution for Laplace's equation is obtained through comparison with its corresponding Gegenbauer expansion.Comment: arXiv admin note: substantial text overlap with arXiv:1201.440