The role of flood wave superposition in the severity of large floods

Abstract. The severity of floods is shaped not only by event- and catchment-specific characteristics but also depends on the river network configuration. At the confluence of relevant tributaries with the main river, flood event characteristics may change depending on the magnitude and temporal match of flood waves. This superposition of flood waves may potentially increase the flood severity downstream in the main river. However, this aspect has not been analysed for a large set of river confluences to date. To fill this gap, the role of flood wave superposition in the flood severity at downstream gauges is investigated in four large river basins in Germany and Austria (the Elbe, the Danube, the Rhine and the Weser). A novel methodological approach to analyse flood wave superposition is presented and applied to mean daily discharge data from 37 triple points. A triple point consists of three gauges: one in the tributary as well as one upstream and downstream of the confluence with the main river respectively. At the triple points, differences and similarities in flood wave characteristics between the main river and the tributary are analysed in terms of the temporal match and the magnitudes of flood peaks. At many of the confluences analysed, the tributary peaks consistently arrive earlier than the main river peaks, although high variability in the time lag is generally detected. No large differences in temporal matching are detected for floods of different magnitudes. In the majority of cases, the largest floods at the downstream gauge do not occur due to perfect temporal match between the tributary and the main river. In terms of spatial variability, the impact of flood wave superposition is site-specific. Characteristic patterns of flood wave superposition are detected for flood peaks in the Danube River, where peak discharges largely increase due to inflow from alpine tributaries. Overall, we conclude that the superposition of flood waves is not the driving factor behind flood peak severity at the major confluences in Germany; however, a few confluences show the potential for strong flood magnifications if a temporal shift in flood waves was to occur

Terahertz imaging: a new non-destructive technique for the quality control of plastic weld joints

We present the first investigation of plastic weld joints using terahertz waves. Terahertz time-domain spectroscopy clearly reveals contaminations like metal or sand within the weld joint of two high-density polyethylene sheets. Furthermore, areas can be identified where the welding process has failed and the parts to be joined are separated by a small air gap. We show that a three layer structure of polyethylene-air-polyethylene has a characteristic, frequency-dependent transmission behaviour. This allows for a distinction between welded and non-welded material as well as for the calculation of the air layer thickness from the relative transmission spectrum. Consequently, terahertz time-domain spectroscopy provides a promising new non-destructive and even contactless technique, which is desired by the plastics industry for detecting a variety of deviations from the ideal welding process

Using ecological and field survey data to establish a national list of the wild bee pollinators of crops

The importance of wild bees for crop pollination is well established, but less is known about which species contribute to service delivery to inform agricultural management, monitoring and conservation. Using sites in Great Britain as a case study, we use a novel qualitative approach combining ecological information and field survey data to establish a national list of crop pollinating bees for four economically important crops (apple, field bean, oilseed rape and strawberry). A traits data base was used to establish potential pollinators, and combined with field data to identify both dominant crop flower visiting bee species and other species that could be important crop pollinators, but which are not presently sampled in large numbers on crops flowers. Whilst we found evidence that a small number of common, generalist species make a disproportionate contribution to flower visits, many more species were identified as potential pollinators, including rare and specialist species. Furthermore, we found evidence of substantial variation in the bee communities of different crops. Establishing a national list of crop pollinators is important for practitioners and policy makers, allowing targeted management approaches for improved ecosystem services, conservation and species monitoring. Data can be used to make recommendations about how pollinator diversity could be promoted in agricultural landscapes. Our results suggest agri-environment schemes need to support a higher diversity of species than at present, notably of solitary bees. Management would also benefit from targeting specific species to enhance crop pollination services to particular crops. Whilst our study is focused upon Great Britain, our methodology can easily be applied to other countries, crops and groups of pollinating insects.LH was funded by NERC QMEE CDT. EJB was funded by a BBSRC Ph.D. studentship under grant BB/F016581/1. LB was was supported by the Scholarship Program of the German Federal Environmental Foundation (Deutsche Bundesstiftung Umwelt, DBU, AZ 20014/302). AJC was funded by the BBSRC and Syngenta UK as part of a case award Ph.D. (grant no. 1518739). AE was funded by the Swiss National Science Foundation (grant number 405940-115642). DG and A-MK were funded by grant PCIN2014-145-C02-02 (MinECo; EcoFruit project BiodivERsA-FACCE2014-74). MG was supported by Establishing a UK Pollinator Monitoring and Research Partnership (PMRP) a collaborative project funded by Defra, the Welsh and Scottish Governments, JNCC and project partners’. GAdG was funded via research projects BO-11-011.01-051 and BO-43-011.06-007, commissioned by the Dutch Ministry of Agriculture, Nature and Food Quality. DK was funded by the Dutch Ministry of Economic Affairs (BO-11-011.01-011). AK-H was funded by the NKFIH project (FK123813), the Bolyai János Fellowship of the MTA, the ÚNKP-19-4-SZIE-3 New National Excellence Program of the Ministry for Innovation and Technology, and together with RF by the Hungarian Scientific Research Fund OTKA 101940. MM was funded by Waitrose & Partners, Fruition PO, and the University of Worcester. MM was funded by grant INIA-RTA2013-00139-C03-01 (MinECo and FEDER). BBP and RFS were funded by the UK Natural Environment Research Council as part of Wessex BESS (ref. NE/J014680/1). NJV was funded by the Walloon Region (Belgium) Direction générale opérationnelle de l’Agriculture, des Ressources naturelles et de l’Environnement (DGO3) for the "Modèle permaculturel" project on biodiversity in micro-farms, FNRS/FWO joint programme EOS — Excellence Of Science CliPS: Climate change and its impact on Pollination Services (project 30947854)". CW was funded by the Deutsche Forschungsgemeinschaft (DFG) (Project number 405945293). BW was funded by the Natural Environment Research Council (NERC) under research programme NE/N018125/1 ASSIST – Achieving Sustainable Agricultural Systems www.assist.ceh.ac.uk. TB and TO are supported by BBSRC, NERC, ESRC and the Scottish Government under the Global Food Security Programme (Grant BB/R00580X/1)

Coenzyme A-transferase-independent butyrate re-assimilation in Clostridium acetobutylicum - evidence from a mathematical model

The hetero-dimeric CoA-transferase CtfA/B is believed to be crucial for the metabolic transition from acidogenesis to solventogenesis in Clostridium acetobutylicum as part of the industrial-relevant acetone-butanol-ethanol (ABE) fermentation. Here, the enzyme is assumed to mediate re-assimilation of acetate and butyrate during a pH-induced metabolic shift and to faciliate the first step of acetone formation from acetoacetyl-CoA. However, recent investigations using phosphate-limited continuous cultures have questioned this common dogma. To address the emerging experimental discrepancies, we investigated the mutant strain Cac-ctfA398s::CT using chemostat cultures. As a consequence of this mutation, the cells are unable to express functional ctfA and are thus lacking CoA-transferase activity. A mathematical model of the pH-induced metabolic shift, which was recently developed for the wild type, is used to analyse the observed behaviour of the mutant strain with a focus on re-assimilation activities for the two produced acids. Our theoretical analysis reveals that the ctfA mutant still re-assimilates butyrate, but not acetate. Based upon this finding, we conclude that C. acetobutylicum possesses a CoA-tranferase-independent butyrate uptake mechanism that is activated by decreasing pH levels. Furthermore, we observe that butanol formation is not inhibited under our experimental conditions, as suggested by previous batch culture experiments. In concordance with recent batch experiments, acetone formation is abolished in chemostat cultures using the ctfa mutant

Comparative analysis of scalar upper tail indicators

Different upper tail indicators exist to characterize heavy tail phenomena, but no comparative study has been carried out so far. We evaluate the shape parameter (GEV), obesity index, Gini index and upper tail ratio (UTR) against a novel benchmark of tail heaviness\u2013the surprise factor. Sensitivity analyses to sample size and changes in scale-to-location ratio are carried out in bootstrap experiments. The UTR replicates the surprise factor best but is most uncertain and only comparable between records of similar length. For samples with symmetric Lorenz curves, shape parameter, obesity and Gini indices provide consistent indications. For asymmetric Lorenz curves, however, the first two tend to overestimate, whereas Gini index tends to underestimate tail heaviness. We suggest the use of a combination of shape parameter, obesity and Gini index to characterize tail heaviness. These indicators should be supported with calculation of the Lorenz asymmetry coefficients and interpreted with caution

Morphological analyses of polybutylene terephthalate by terahertz time-domain spectroscopy

A characteristic feature around 2.38 THz in the real and the imaginary part of the permittivity or alternatively the absorption coefficient and refraction index is a good indicator of the degree of crystallinity in polybutylene terephthalate (PBT). We assign this spectral feature to macromolecular origin, based on the comparison with polyethylene terephthalate (PET). Furthermore, the refractive index behavior reveals more insight about the morphology affected by thermal treatment of the samples under test.Bernd M. Fischer, Steffen Wietzke, Marco Reuter, Nikolaus Nestle, Evgueni Klimov and Martin Koc

A robust optimization technique for analysis of multi-tracer experiments.

Fate and transport of solutes in heterogeneous porous media is largely affected by diffusive mass exchange between mobile and immobile water zones. Since it is difficult to directly measure and determine the effect in the aquifers, multi-tracer experiments in combination with mathematical modeling are used to obtain quantitative information about unknown system parameters such as the effective mobile and immobile porosity, and the diffusive mass exchange between mobile and immobile water zones. The Single Fissure Dispersion Model (SFDM) describing nonreactive transport of solutes in saturated dual-porosity media, has been employed as a modeling approach to explain dual-porosity experiments in the field and laboratory (column experiments). SFDM optimization with conventional methods of minimization was immensely difficult due to its complex analytical form. Thus, previous studies used a trial and error procedure to fit it to the experimental observations. In this study, a rigorous optimization technique based on the newly developed scatter search method is presented that automatically minimizes the SFDM to find the optimal values of the hydrogeologically related parameters. The new program (OptSFDM) is accompanied with an easy-to-use graphical user interface (GUI) that is flexible and fully integrated. The program usability is showcased by a few, previously presented experimental case studies, and compared against the currently available, trial-and-error based, command-line executable, SFDM code