State of the art in the determination of trace elements in seawater: a worldwide proficiency test

This manuscript presents the results of the International Measurement Evaluation Programme 40 (IMEP-40) study, a proficiency test (PT) which was organised to assess the worldwide performance of laboratories for the determination of trace elements in seawater. This PT supports the implementation of the European Union Water Framework Directive 2000/60/EC, which aims at achieving a long-term high level protection of the aquatic environment, covering lakes, ground water and coastal waters. Forty-six participants reported results. The test item was seawater containing the trace elements As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Se and Zn. The trace elements in the test item were present in very low concentrations to mimic natural levels. The results of the participants were rated with z and zeta (zeta) scores in accordance with ISO 13528 and ISO 17043. The standard deviation for proficiency assessment, , was set at 25 % of the respective assigned values for the 12 measured elements based on previous experience with similar PTs. The low levels of the trace elements combined with the high salt concentration of the seawater made the measurements challenging. Many laboratories were unable to detect or quantify the elements and reported "lower than X" values. The percentage of satisfactory performances (expressed as z scores) ranged from 41 % (Cr, Fe) to 86 % (Mo). The PT study showed that the use of proper standard methods, like ISO 17294-2, and sensitive techniques, like inductively coupled plasma mass spectrometry (ICP-MS), contributed to performing well in this PT round

Direct and Inverse Results on Row Sequences of Hermite-Padé Approximation

We give necessary and sufficient conditions for the convergence with geometric rate of the common denominators of simultaneous rational interpolants with a bounded number of poles. The conditions are expressed in terms of intrinsic properties of the system of functions used to build the approximants. Exact rates of convergence for these denominators and the simultaneous rational approximants are provided.The work of B. de la Calle Ysern received support from MINCINN under grant MTM2009-14668-C02-02 and from UPM through Research Group “Constructive Approximation Theory and Applications”. The work of J. Cacoq and G. López was supported by Ministerio de Economía y Competitividad under grants MTM2009-12740-C03-01 and MTM2012-36372-C03-01

IMEP-111: Total Cadmium, Lead, Arsenic, Mercury and Copper and Extractable Cadmium and Lead in Mineral Feed - Report of the Eleventh Interlaboratory Comparison Organised by the European Union Reference Laboratory for Heavy Metals in Feed and Food

The Institute for Reference Materials and Measurements (IRMM) of the Joint Research Centre, a Directorate-General of the European Commission, operates the European Union Reference Laboratory for Heavy Metals in Feed and Food (EU-RL-HM). One of its core tasks is to organize interlaboratory comparisons (ILCs) among appointed National Reference Laboratories. This report presents the results of the eleventh proficiency test (PT) of the EU-RL-HM which focused on the determination of total Cd, Pb, As, Hg and Cu and extractable Cd and Pb in mineral feed according to Directive 2002/32/EC of the European Parliament and of the Council on undesirable substances in animal feed. The test material used in this exercise was the Certified Reference Material (CRM) BCR-032, Moroccan phosphate rock. The material was relabelled to prevent identification by the participants and was dispatched the second half of October 2010. Each participant received one bottle containing approximately 100 g of test material. Thirty-one laboratories from 26 countries registered to the exercise of which 28 reported results for total Cd and total Pb, 25 for total Hg and total Cu, 23 for total As and for extractable Cd and extractable Pb. The assigned values (Xref) for total Cd, As and Cu are the indicative values taken from the BCR-032 certificate. The assigned values (Xref) for total Pb, total Hg and for extractable Cd and Pb were provided by IRMM using isotope dilution-inductively coupled plasma-mass spectrometry (ID-ICP-MS). For total Cd, As, Hg and Cu and for extractable Cd, the uncertainty of the assigned values (uref) was calculated by combining the uncertainty of the characterization (uchar) and a contribution for between-bottle homogeneity (ubb) (which was calculated from the certification report). For total and extractable Pb the number of replicates performed to establish the assigned value was higher (11 replicates) than for the other measurands (6 replicates). Since the aliquots were taken from different bottles, it was assumed that uchar included a contribution for the homogeneity. For total Cd, As and Cu, uchar were taken from the CRM certificate as indicated by the producer. For extractable Cd the same uchar as for total Cd was used. For total Pb and Hg and for extractable Pb, uchar was calculated according to the ISO Guide for the Expression of Uncertainty in Measurement (GUM). Participants were invited to report the uncertainties of their measurements. This was done by the majority of the laboratories taking part in this exercise.JRC.DG.D.6-Food Safety and Qualit

IMEP-31: Total Arsenic, Cadmium, Copper, Lead and Mercury, as well as Extractable Cadmium and Lead in Mineral Feed - Interlaboratory Comparison Report

The Institute for Reference Materials and Measurements (IRMM) of the Joint Research Centre (JRC), a Directorate-General of the European Commission, operates the International Measurement Evaluation Programme® IMEP. It organises interlaboratory comparisons (ILC's) in support to EU policies. This report presents the results of an ILC which focussed on the determination of total As, Cd, Cu, Pb, and Hg, as well as extractable Cd and Pb in mineral feed according to Directive 2002/32/EC of the European Parliament and of the Council on undesirable substances in animal feed. The test material used in this exercise was the Certified Reference Material (CRM) BCR-032 (Moroccan phosphate rock) from the IRMM. The material was relabelled and each participant received one bottle containing approximately 100 g of test material. Fifty-six laboratories from 26 countries registered to the exercise and 51 of them reported results. Total As, Cd, Cu and Hg were certified in BCR-032 in 1979. The material was re-analysed by two expert laboratories and As an Cd values could be confirmed. Copper could not be analysed in time by an expert laboratory, and thus it was decided to use the indicative value from the certificate as assigned value. The assigned values for total Hg and total Pb were determined at IRMM by a primary method. The same method was used to determine extractable Cd and Pb, whose mass fractions appeared to be identical to the respective total mass fractions and thus the same assigned values were used. The standard deviation for proficiency assessment was set at 11 % for total As, 10 % for total and extractable Cd, 9 % for total Cu, and at 15 % for total Hg based on the modified Horwitz equation and/or the outcome of previous ILCs organised by IMEP. For total and extractable Pb, was set at 25 %. The majority of the laboratories reported uncertainties with their results and were rated with z- and ζ-scores (zeta-scores) in accordance with ISO 13528. Performances appear to be good for total & extractable Cd and total & extractable Pb, the percentage of satisfying z-scores ranging between 85 % and 89 %. Share of satisfactory z-scores are significantly lower for total As (61 %), Cu (67 %) and in particular for Hg (47 %). No distinct reason could be given, but it seems altogether that the analytical methods were not always adjusted to the inorganic test material, reflected by some influence of applied technique and inappropriate choice of reference material.JRC.DG.D.6-Food Safety and Qualit

Hydrogen from Sunlight and Water: A Side-by-Side Comparison between Photoelectrochemical and Solar Thermochemical Water-Splitting

Photoelectrochemical (PEC) and solar thermochemical (STCH) water-splitting represent two promising pathways for direct solar hydrogen generation. PEC water-splitting integrates multiple functional materials and utilizes energetic electrons and holes generated from sunlight to produce hydrogen and oxygen in two half-reactions, while STCH water-splitting couples a series of consecutive chemical reactions and uses absorbed heat from sunlight to generate hydrogen and oxygen in two full reactions. In this Focus Review, the basic operating principles, sunlight utilization, device architecture, reactor design, instantaneous and annually averaged solar-to-hydrogen (STH) conversion efficiency, and the operating conditions and constraints of both pathways are compared. A side-by-side comparison addresses some common sources of confusion and misinterpretation, especially in the evaluation of STH conversion efficiencies, and reveals distinct features and challenges in both PEC and STCH technologies. This Focus Review also addresses materials and device challenges in PEC and STCH for cost-competitive hydrogen generation

Extensive conservation of ancient microsynteny across metazoans due to cis-regulatory constraints

This article is distributed exclusively by Cold Spring Harbor Laboratory Press for the first six months after the full-issue publication date; after six months, it is available under a Creative Commons License.-- et al.The order of genes in eukaryotic genomes has generally been assumed to be neutral, since gene order is largely scrambled over evolutionary time. Only a handful of exceptional examples are known, typically involving deeply conserved clusters of tandemly duplicated genes (e.g., Hox genes and histones). Here we report the first systematic survey of microsynteny conservation across metazoans, utilizing 17 genome sequences. We identified nearly 600 pairs of unrelated genes that have remained tightly physically linked in diverse lineages across over 600 million years of evolution. Integrating sequence conservation, gene expression data, gene function, epigenetic marks, and other genomic features, we provide extensive evidence that many conserved ancient linkages involve (1) the coordinated transcription of neighboring genes, or (2) genomic regulatory blocks (GRBs) in which transcriptional enhancers controlling developmental genes are contained within nearby bystander genes. In addition, we generated ChIP-seq data for key histone modifications in zebrafish embryos, which provided further evidence of putative GRBs in embryonic development. Finally, using chromosome conformation capture (3C) assays and stable transgenic experiments, we demonstrate that enhancers within bystander genes drive the expression of genes such as Otx and Islet, critical regulators of central nervous system development across bilaterians. These results suggest that ancient genomic functional associations are far more common than previously thought—involving ∼12% of the ancestral bilaterian genome—and that cis-regulatory constraints are crucial in determining metazoan genome architecture.M.I., M.S.A., S.W.R., and H.B.F. were funded by NIH grant 1R21HG005240-01A1. H.B.F. is an Alfred P. Sloan Fellow and Pew Scholar in the Biomedical Sciences. J.J.T., A.F-M., O.B., E.C-M., and J.L.G-S. were funded by grants BFU2010-14839, CSD2007-00008, and Proyecto de Excelencia CVI-3488.Peer reviewe

sFlt-1/PlGF for prediction of early-onset pre-eclampsia: STEPS (Study of early pre-eclampsia in Spain)

Objective: A high ratio of soluble fms‐like tyrosine kinase‐1 (sFlt‐1) to placental growth factor (PlGF) has been linked to pre‐eclampsia (PE). We evaluated the sFlt‐1/PlGF ratio as a predictive marker for early‐onset PE in women at risk of PE. Methods: This prospective, Spanish, multicenter study included pregnant women with a risk factor for PE, including intrauterine growth restriction, PE, eclampsia or hemolysis, elevated liver enzymes and low platelet count syndrome in previous pregnancy, pregestational diabetes or abnormal uterine artery Doppler. The primary objective was to show that the sFlt‐1/PlGF ratio at 20, 24 and 28 weeks' gestation was predictive of early‐onset PE (< 34 + 0 weeks). Serum sFlt‐1 and PlGF were measured at 20, 24 and 28 weeks. Multivariate logistic regression was used to develop a predictive model. Results: A total of 819 women were enrolled, of which 729 were suitable for analysis. Of these, 78 (10.7%) women developed PE (24 early onset and 54 late onset). Median sFlt‐1/PlGF ratio at 20, 24 and 28 weeks was 6.3 (interquartile range (IQR), 4.1–9.3), 4.0 (IQR, 2.6–6.3) and 3.3 (IQR, 2.0–5.9), respectively, for women who did not develop PE (controls); 14.5 (IQR, 5.5–43.7), 18.4 (IQR, 8.2–57.9) and 51.9 (IQR, 11.5–145.6) for women with early‐onset PE; and 6.7 (IQR, 4.6–9.9), 4.7 (IQR, 2.8–7.2) and 6.0 (IQR, 3.8–10.5) for women with late‐onset PE. Compared with early‐onset PE, the sFlt‐1/PlGF ratio was significantly lower in controls (P < 0.001 at each timepoint) and in women with chronic hypertension (P < 0.001 at each timepoint), gestational hypertension (P < 0.001 at each timepoint) and late‐onset PE (P < 0.001 at each timepoint). A prediction model for early‐onset PE was developed, which included the sFlt‐1/PlGF ratio plus mean arterial pressure, being parous and previous PE, with areas under the receiver–operating characteristics curves of 0.86 (95% CI, 0.77–0.95), 0.91 (95% CI, 0.85–0.97) and 0.93 (95% CI, 0.86–0.99) at 20, 24 and 28 weeks, respectively, and was superior to models using the sFlt‐1/PlGF ratio alone or uterine artery mean pulsatility index. Conclusions: The sFlt‐1/PlGF ratio can improve prediction of early‐onset PE for women at risk of this condition