Charge Generation and Electron-Trapping Dynamics in Hybrid Nanocrystal-Polymer Solar Cells

We investigate the charge-trapping dynamics in hybrid nanocrystal-polymer systems and their effect on performance in photovoltaic devices. Employing various steady-state spectroscopy techniques and ultrafast, three-pulse transient absorption methods, we identify the depth of electron trap states in the nanocrystal band gap and measure their population dynamics. Our findings show that photogenerated electrons are trapped at midgap states on the nanocrystal within hundreds of picoseconds. The trapping of the majority of charge carriers before charge extraction results in a lowering of the quasi-Fermi level of the electrons which limits the device open-circuit voltage, thereby underlining the significance of these processes in conjugated polymer/nanocrystal hybrid photovoltaics.Engineering and Physical Sciences Research Council (Grant IDs: EP/M005143/1, EP/G060738/1, EP/G037221/1), Worshipful Company of Armourers and Brasiers (Gauntlet Trust award), German National Academic Foundation (Studienstiftung)This is the final version of the article. It first appeared from the American Chemical Society via http://dx.doi.org/10.1021/acs.jpcc.6b0759

Visualizing excitations at buried heterojunctions in organic semiconductor blends

Interfaces play a crucial role in semiconductor devices, but in many device architectures they are nanostructured, disordered and buried away from the surface of the sample. Conventional optical, X-ray and photoelectron probes often fail to provide interface-specific information in such systems. Here we develop an all-optical time-resolved method to probe the local energetic landscape and electronic dynamics at such interfaces, based on the Stark effect caused by electron–hole pairs photo-generated across the interface. Using this method, we found that the electronically active sites at the polymer/fullerene interfaces in model bulk-heterojunction blends fall within the low-energy tail of the absorption spectrum. This suggests that these sites are highly ordered compared with the bulk of the polymer film, leading to large wavefunction delocalization and low site energies. We also detected a 100 fs migration of holes from higher- to lower-energy sites, consistent with these charges moving ballistically into more ordered polymer regions. This ultrafast charge motion may be key to separating electron–hole pairs into free charges against the Coulomb interaction.This work was supported by the Engineering and Physical Sciences Research Council (EPSRC) and the Winton Programme for the Physics of Sustainability. A.C.J. thanks the University of Cambridge for funding (CHESS). Synchrotron measurements were undertaken on the SAXS beamline at the Australian Synchrotron, Victoria, Australia and we acknowledge the help of N. Lal with the measurements. S.H. thanks the framework project Soltech for funding

Efficient singlet exciton fission in pentacene prepared from a soluble precursor

Carrier multiplication using singlet exciton fission (SF) to generate a pair of spin-triplet excitons from a single optical excitation has been highlighted as a promising approach to boost the photocurrent in photovoltaics (PVs) thereby allowing PV operation beyond the Shockley-Queisser limit. The applicability of many efficient fission materials, however, is limited due to their poor solubility. For instance, while acene-based organics such as pentacene (Pc) show high SF yields (up to 200%), the plain acene backbone renders the organic molecule insoluble in common organic solvents. Previous approaches adding solubilizing side groups such as bis(tri-$\textit{iso}$-propylsilylethynyl) to the Pc core resulted in low vertical carrier mobilities due to reduction of the transfer integrals via steric hindrance, which prevented high efficiencies in PVs. Here we show how to achieve good solubility while retaining the advantages of molecular Pc by using a soluble precursor route. The precursor fully converts into molecular Pc through thermal removal of the solubilizing side groups upon annealing above 150 °C in the solid state. The annealed precursor shows small differences in the crystallinity compared to evaporated thin films of Pc, indicating that the Pc adopts the bulk rather than surface polytype. Furthermore, we identify identical SF properties such as sub-100 fs fission time and equally long triplet lifetimes in both samples.M.T. thanks the Gates Cambridge Trust and the Winton Programme for the Physics of Sustainability for funding. A.H.K. acknowledges the Cambridge Nehru Bursary, the Cambridge Bombay Society, a Trinity-Henry Barlow- and Haidar Scholarship as well as Rana Denim Pvt. Ltd. for financial support. K.B. and J.N. would like to thank Dr. Tom Arnold and Jakub Rozboril for assistance during the beam time at Diamond Light Source. Financial support for K.B. from Diamond Light Source, Swiss Light Source, and the German Research Foundation (Grant No. BR 4869/1-1) is gratefully acknowledged. M.L.B. is a research fellow of Christ’s College, Cambridge. This work was supported by the Engineering and Physical Sciences Research Council (Grant Nos. EP/M005143/1, EP/G060738/1 and Cambridge NanoDTC EP/G037221/1, EP/L015978/1)

High-yield parallel fabrication of quantum-dot monolayer single-electron devices displaying Coulomb staircase, contacted by graphene.

It is challenging for conventional top-down lithography to fabricate reproducible devices very close to atomic dimensions, whereas identical molecules and very similar nanoparticles can be made bottom-up in large quantities, and can be self-assembled on surfaces. The challenge is to fabricate electrical contacts to many such small objects at the same time, so that nanocrystals and molecules can be incorporated into conventional integrated circuits. Here, we report a scalable method for contacting a self-assembled monolayer of nanoparticles with a single layer of graphene. This produces single-electron effects, in the form of a Coulomb staircase, with a yield of 87 ± 13% in device areas ranging from 2 to 16 μm2, containing up to 650,000 nanoparticles. Our technique offers scalable assembly of ultra-high densities of functional particles or molecules that could be used in electronic integrated circuits, as memories, switches, sensors or thermoelectric generators

Time preferences and risk aversion: tests on domain differences

The design and evaluation of environmental policy requires the incorporation of time and risk elements as many environmental outcomes extend over long time periods and involve a large degree of uncertainty. Understanding how individuals discount and evaluate risks with respect to environmental outcomes is a prime component in designing effective environmental policy to address issues of environmental sustainability, such as climate change. Our objective in this study is to investigate whether subjects' time preferences and risk aversion across the monetary domain and the environmental domain differ. Crucially, our experimental design is incentivized: in the monetary domain, time preferences and risk aversion are elicited with real monetary payoffs, whereas in the environmental domain, we elicit time preferences and risk aversion using real (bee-friendly) plants. We find that subjects' time preferences are not significantly different across the monetary and environmental domains. In contrast, subjects' risk aversion is significantly different across the two domains. More specifically, subjects (men and women) exhibit a higher degree of risk aversion in the environmental domain relative to the monetary domain. Finally, we corroborate earlier results, which document that women are more risk averse than men in the monetary domain. We show this finding to, also, hold in the environmental domain

Low-Temperature Solution-Grown CsPbBr3_{3} Single Crystals and Their Characterization

Cesium lead bromide (CsPbBr$_{3}$) was recently introduced as a potentially high performance thin-film halide perovskite (HaP) material for optoelectronics, including photovoltaics, significantly more stable than MAPbBr$_{3}$ (MA = CH$_{3}$NH$_{3}$+). Because of the importance of single crystals to study relevant material properties per se, crystals grown under conditions comparable to those used for preparing thin films, i.e., low-temperature solution-based growth, are needed. We show here two simple ways, antisolvent-vapor saturation or heating a solution containing retrograde soluble CsPbBr$_{3}$, to grow single crystals of CsPbBr$_{3}$ from a precursor solution, treated with acetonitrile (MeCN) or methanol (MeOH). The precursor solutions are stable for at least several months. Millimeter-sized crystals are grown without crystal-seeding and can provide a 100% yield of CsPbBr$_{3}$ perovskite crystals, avoiding a CsBr-rich (or PbBr$_{2}$-rich) composition, which is often present alongside the perovskite phase. Further growth is demonstrated to be possible with crystal seeding. The crystals are characterized in several ways, including first results of charge carrier lifetime (30 ns) and an upper-limit of the Urbach energy (19 meV). As the crystals are grown from a polar aprotic solvent (DMSO), which is similar to those used to grow hybrid organic-inorganic HaP crystals, this may allow growing mixed (organic and inorganic) monovalent cation HaP crystals.G.H. and D.C. acknowledge the Israel Ministry of Science and the Israel National Nano-Initiative for partial support and G.H. acknowledges the Leona M. and Harry B. Helmsley Charitable Trust. A.S., M.L.B., and R.H.F. would like acknowledge EPSRC for their support. A.S. would also like to acknowledge support from an India-UK APEX project

Gauge-independent MS‾\overline{MS} renormalization in the 2HDM

We present a consistent renormalization scheme for the CP-conserving Two-Higgs-Doublet Model based on $\overline{MS}$ renormalization of the mixing angles and the soft-$Z_2$-symmetry-breaking scale $M_{sb}$ in the Higgs sector. This scheme requires to treat tadpoles fully consistently in all steps of the calculation in order to provide gauge-independent $S$-matrix elements. We show how bare physical parameters have to be defined and verify the gauge independence of physical quantities by explicit calculations in a general $R_{\xi}$-gauge. The procedure is straightforward and applicable to other models with extended Higgs sectors. In contrast to the proposed scheme, the $\overline{MS}$ renormalization of the mixing angles combined with popular on-shell renormalization schemes gives rise to gauge-dependent results already at the one-loop level. We present explicit results for electroweak NLO corrections to selected processes in the appropriately renormalized Two-Higgs-Doublet Model and in particular discuss their scale dependence.Comment: 52 pages, PDFLaTeX, PDF figures, JHEP version with Eq. (5.23) correcte

Liposomes: a new non-pharmacological therapy concept for seasonal-allergic-rhinoconjunctivitis

Mucosal barrier disorders play an important role in the pathomechanism of the allergic disease. A new approach for their treatment uses liposomes, which consist of phospholipids that make up 75% of the protective nasal surfactant layer. Our aim was to investigate the efficacy of liposomal-based therapy, as a comprehensive treatment alternative to guideline cromoglycate-based therapy, in the treatment of seasonal allergic rhinoconjunctivitis (SAR). We compared nasal and conjunctival symptom reduction with LipoNasal n nasal spray used as monotherapy (LNM), or LipoNasal n nasal spray and Tears Again eye spray combination therapy (LTC), against standard cromoglycate combination therapy (CGC). This prospective, controlled, open observational study was conducted monocentrically. According to their symptoms and preferences 72 patients with SAR were distributed in three equal groups. The study comprised two visits at an interval of 7 days. The efficacy was examined by daily documenting nasal and conjunctival symptom scores. The Nasal-Spray-Sensory-Scale and the Eye-Drops/Spray-Sensory-Scale were used to investigate the tolerability. Quality of life (QoL) was evaluated, using the RHINASTHMA QoL German adapted version. LNM achieved significant improvement in nasal (p < 0.001) and conjunctival symptoms (p = 0.050). The symptom reduction using CGC was equally significant. LTC led to significant nasal symptom relief (p = 0.045). QoL did not improve significantly in all groups (p > 0.05). The tolerability of all treatments was good and no adverse reactions were observed. In all treatment groups the improvement of the nasal and conjunctival symptom scores exceeds the minimal clinically important difference (MCID). The results demonstrate good tolerability and efficacy of non-pharmaceutical liposomal-based treatment (LipoNasal n and Tears Again), given as monotherapy or combination therapy, for nasal and conjunctival symptoms caused by SAR. This study indicates that liposomal-based treatment for SAR may be a comparable alternative to cromoglycate therapy. Further studies are needed to verify these findings

Tear fluid biomarkers in ocular and systemic disease: potential use for predictive, preventive and personalised medicine

In the field of predictive, preventive and personalised medicine, researchers are keen to identify novel and reliable ways to predict and diagnose disease, as well as to monitor patient response to therapeutic agents. In the last decade alone, the sensitivity of profiling technologies has undergone huge improvements in detection sensitivity, thus allowing quantification of minute samples, for example body fluids that were previously difficult to assay. As a consequence, there has been a huge increase in tear fluid investigation, predominantly in the field of ocular surface disease. As tears are a more accessible and less complex body fluid (than serum or plasma) and sampling is much less invasive, research is starting to focus on how disease processes affect the proteomic, lipidomic and metabolomic composition of the tear film. By determining compositional changes to tear profiles, crucial pathways in disease progression may be identified, allowing for more predictive and personalised therapy of the individual. This article will provide an overview of the various putative tear fluid biomarkers that have been identified to date, ranging from ocular surface disease and retinopathies to cancer and multiple sclerosis. Putative tear fluid biomarkers of ocular disorders, as well as the more recent field of systemic disease biomarkers, will be shown