Bow-Tie Microstrip Antenna Design

In this paper, the bow-tie microstrip antennas have been designed with two different angles of 40° and 80°. An investigaton on the effect of the angle to the return loss and radiation patterns had been carried out. The impedance matching network with the niicrostrip transmission line feeding was used in this study. Simulation and measurement results for the return loss and radiation patterns were presented

Generating Electricity using PV/FC Hybrid System

A reliable electrical energy supply is a prerequisitefor improving the standard economic and quality of life levels in acountry. As is the case in many countries, it is uneconomical toconnect these villages to the existing grid, the installation of standaloneelectrical power generators has become common practice. Asa result, diesel stand-alone power generators see widespread use inthese remote locales, which, whilst fit for their intended purpose,unfortunately suffer from several drawbacks, including instabilityin regards to everyday oil prices and a number of environmentalissues. The implementation of a PV/FC hybrid power system couldbe one potential alternative to help solve these problems. Therefore,this paper presents PV/FC system control strategies. This study isespecially important in terms of envisioning the future energysupply needs. By using HOMER the proposed control strategiesand suggested components of a PV/FC system would be able toproduce a satisfactory outcome

An ultrafast 1 x M all-optical WDM packet-switched router based on the PPM header address

This paper presents an all-optical 1 x M WDM router architecture for packet routing at multiple wavelengths simultaneously, with no wavelength conversion modules. The packet header address adopted is based on the pulse position modulation (PPM) format, thus enabling the use of only a singlebitwise optical AND gate for fast header address correlation. It offers multicast as well as broadcast capabilities. It is shown that a high speed packet routing at 160 Gb/s can be achieved with a low channel crosstalk (CXT) of ~ -27 dB at a channel spacing of greater than 0.4 THz and a demultiplexer bandwidth of 500 GHz

The Integration Of Rectangular SIW Filter and Microstrip Patch Antenna Based On Cascaded Approach

This paper presents the technique for integrating the rectangular Substrate Integrated Waveguide (SIW) filter with the rectangular microstrip patch antenna to produce filtering and radiating element in a single device. To proof the concept, the integrated microwave filter and antenna at center frequency of 2 GHz was demonstrated and validated through simulation and measurement. It demonstrated promising measured results, which were ingood agreement with the simulated results. The integrated microwave filter and antenna would be beneficial in microwave systems where the reduction of overall volume and weight as well as cost is very important such as in base stations and multiplexer in any communication systems

A Parametric Study on Dual-Band Meander Line Monopole Antenna For RF Energy Harvesting

This paper studies the dual-band monopole antenna based on meander line structure for Global System for Mobile Communications (GSM) band applications, which is also has the potential to be used for RF energy harvesting. A meander line antenna with a conductor line is investigated during the design using the Computer Simulation Tool (CST) software. The antenna is fabricated on a double-sided FR-4 printed circuit board using an etching technique. The comparison between simulation and measurement results for the return loss and radiation patterns are observed and are in good agreement. A bandwidth of 97 MHz and return loss of -19.29 dB is obtained at the first frequency band, i,e. 915 MHz, while a bandwidth of 46.2 MHz with a return loss of -16.27 dB are obtained at the second frequency band, i.e. 1800 MHz. This study is an early investigation in designing the RF energy harvesting to support green technology and sustainable development particularly for Wireless Sensor Network (WSN) as well as Radio Frequency Identification (RFID) applications

Dual-Band monopole Antenna For Energy Harvesting System

A planar dual-band monopole antenna is presented for Global System for Mobile Communications (GSM) band applications, which also have the potential to be used for energy harvesting system. The proposed antenna comprises of a ground plane at the back of the FR4 substrate and three microstrip lines which are physically connected with each other at the top surface of the substrate. The monopole antenna achieves good return loss at resonance frequencies of 915 MHz and 1800 MHz with a bandwidth value of 124.2 MHz and 196.9 MHz respectively. The antenna gains of 1.97 dB and 3.05 dB are achieved at resonance frequencies of 900 MHz and 1800 MHz. Experimental results show good agreement with simulated performance. The output from the receiving antenna is also observed in order to analyze the relationship of the power level and the distance between transmitting and receiving antenna. This study is an early investigation in designing the RF energy harvesting system to support green technology and sustainable development particularly for Wireless Sensor Network (WSN) applications

The fading wild plant food–medicines in upper chitral, nw pakistan

The subject of food–medicines (foods ingested in order to obtain a therapeutic activity or to prevent diseases) is garnering increasing attention from both ethnobiologists and ethnopharmacol-ogists as diet-related chronic diseases are one of the major problems resulting in a large proportion of deaths globally, which calls for interest from the scientific community to make sensible decisions in the field of food and medicine. In this regard, the current study is an important attempt at providing baseline data for developing healthy and curative food ingredients. This study aimed at recording the culinary and medicinal uses of wild food plants (WFPs) in the remote Mastuj Valley, located at the extreme north of Chitral District, Pakistan. An ethnobotanical survey was completed via 30 in-depth semi-structured interviews with local knowledge holders to record the food and medicinal uses of WFPs in the study area. A total of 43 WFPs were recorded, most of which were used as cooked vegetables and raw snacks. Leaves were the most frequently used plant part. A remarkable proportion (81%) of use reports for the recorded wild plant taxa were quoted as food–medicines or medicinal foods, while very few were reported as either food or medicines, without any relationship between uses in these two domains. Previous ethnomedicinal studies from nearby regions have shown that most of the recorded wild plants have been used as medicines, thus supporting the findings of the current study. A literature survey revealed that many of the reported medicinal uses (33%) for the quoted WFPs were not verifiable on PubMed as they have not been studied for their respective medicinal actions. We observed that most of the plants quoted here have disappeared from the traditional food and medicinal system, which may be attributed to the invasion of the food market and the prevalence of allopathic medicine. However, knowledge of these wild plants is still alive in memory, and women are the main holders of cultural knowledge as they use it to manage the cooking and processing of WFPs. Therefore, in this context, we strongly recommend the preservation of local biocultural heritage, promoted through future development and educational programs, which could represent a timely response to the loss of cultural and traditional knowledge

Corrosion Inhibition Study of Mild Steel in Acidic Medium by Antibiotic Drugs: a Comparative Study

- A comparison of the inhibiting efficiency of antibiotic drugs (ciprofloxacin, cloxacillin, and amoxicillin) on the corrosion of mild steel in 1 mol·L−1 HCl were studied at room temperature using mass loss measurement. The main reason is probably be due to the formation of protective coverage by the inhibitor as other authors reported previously. Adsorption characteristics of the inhibitor has also been studied using simple equation and it was found that drugs inhibits the corrosion of mild steel by being adsorbed on the surface of mild steel by a physical adsorption mechanism. The adsorption of drugs on the mild steel surface was found to be spontaneous and obey the Langmuir adsorption isotherm model. It was observed that the test drug has a promising inhibitory action in acid medium against corrosion of mild steel. Moreover it was revealed that an inhibition efficiency of 80.1 % can be achieved with 3×10-3M ciprofloxacin drug treatment on mild steel

Web-based virtual learning environment (EmoViLe) with emotive interface feature

This study attempts to obtain the user requirements for the EmoViLe during the data collection and to identify the user requirement for the EmoViLE. This VLE will be benefited to the student by improving the user experience and increasing their engagement when using the VLE, and lecturer in helping them to understand their student better and to come out with a better future plan for their learning assessment. The methodology in doing this study are Phase 1 which involved the initial study on the previous work, Phase 2 is the data collection on the user requirement, Phase 3 which involves the design process of the VLE, Phase 4 is the development phase of the VLE and Phase 5 is the testing on the prototype of the VLE. The expected outcome is a prototype of the VLE with the emotive interface feature that can contribute for the improvement and betterment on teaching and learning process between students and lecturer.Keywords: emotions; virtual learning environment; web-based teaching; web-based learning dashboard; Kansei engineering