9 research outputs found

    Measurement and modeling of N balance between atmosphere and biosphere over a grazed grassland (Bugacpuszta) in Hungary

    Get PDF
    This work is a synthesis of a 5-year estimation of nitrogen balance at a semi-arid, semi-natural, undisturbed grassland site (Bugac). We measured the N input of atmospheric pollutants by wet and dry deposition of gases and aerosols, while we considered N output as NO and N2O gases volatilized from soil. Besides measurements of soil fluxes, the denitrification-decomposition (DNDC) ecological model was also used and simulations were compared to and validated against the measured values. The daily flux simulations generally did not match well the measured data for N2O and NO. In most cases, the mean fluxes were underestimated, though results of the comparison of monthly values suggest that model data, together with observed deposition data, are applicable to estimate the net N balance for grasslands. The calculated yearly N balance (net flux) between atmosphere and surface, without biological fixation and effect of grazing, ranged between −9.4 and −14 kg N ha−1 year−1 as the sum of the measured deposition and emission terms, −11 to −15 and 0.9 to 2.9 kg N ha−1 year−1, respectively, between 2006 and 2010. Observed and modeled soil emissions were lower by one order of magnitude than atmospheric deposition. Considering the biological nitrogen fixation and the effect of grazing (effects of both grazed plant and excreta), the net nitrogen balance varies within −6.6 and −11 kg N ha−1 year−1. It seems — taking into account the high uncertainty in calculation due to the effect of grazing — that sources of nitrogen exceed the sinks; the surplus is probably mineralized in the soil

    Emission factors for PM10 and PAHs from illegal burning of different types of municipal waste in households

    Get PDF
    It is a common practice in the developing countries and in some regions of Europe that solid wastes generated in the households (e.g. plastic beverage packaging and other plastic wastes, textile wastes, fibreboards, furniture, tyres, and coloured paper waste) are burned in wood- or coal-fired stoves during the winter months. In Europe, the types and volume of municipal waste burned in households is virtually unknown because these activities are illegal and not recorded, with the exception of a few media reports or court cases. Even though particulate emissions from illegal waste burning pose an unprecedented hazard to human health due to the combination of excessive emission factors (EFs) and uncontrolled chemical composition, there is scarce information on the specific emission factors for PM10 and polycyclic aromatic hydrocarbons (PAHs) in the scientific literature. In this work, controlled combustion tests were performed with 12 different types of municipal solid waste and particulate emissions were measured and collected for chemical analysis. Absolute emission factors for PM10 and PAHs as well as the benzo(a)pyrene toxicity equivalent of the latter are reported for the first time for the indoor combustion of 12 common types of municipal solid waste that are frequently burned in households worldwide

    Emission factors for PM10 and polycyclic aromatic hydrocarbons (PAHs) from illegal burning of different types of municipal waste in households

    Get PDF
    It is a common practice in developing countries and in some regions of Europe that solid wastes generated in households (e.g. plastic beverage packaging and other plastic wastes, textile wastes, fibreboards, furniture, tyres, and coloured-paper waste) are burned in wood- or coal-fired stoves during the winter months. In Europe, the types and volume of municipal waste burned in households is virtually unknown because these activities are illegal and not recorded, with the exception of a few media reports or court cases. Even though particulate emissions from illegal waste burning pose a significant hazard to human health due to the combination of excessive emission factors (EFs) and uncontrolled chemical composition, there is scarce information on the specific EFs for PM10 and polycyclic aromatic hydrocarbons (PAHs) in the scientific literature. In this work, controlled combustion tests were performed with 12 different types of municipal solid waste, and particulate emissions were measured and collected for chemical analysis. Absolute EFs for PM10 and PAHs as well as the benzo(a)pyrene (BaP) toxicity equivalent of the latter are reported for the first time for the indoor combustion of 12 common types of municipal solid waste that are frequently burned in households worldwide. It was found that the PM10 emission factors from the combustion of wood-based waste samples were about twice that of firewood, whereas EFs in the range of 11–82 mg g−1 (a factor of 5–40 times higher than that of dry firewood under the same conditions) were obtained for different types of plastic waste. The latter were also found to emit exceptionally high quantities of PAHs, by a factor of 50–750 more than upon the combustion of dry firewood under the same conditions. Since the more toxic 4–6 ring PAHs were predominant in the particulate emission from plastic waste burning, BaP equivalent toxicity was up to 4100 times higher than that from wood combustion

    Detailed Carbon Isotope Study of PM2.5 Aerosols at Urban Background, Suburban Background and Regional Background Sites in Hungary

    No full text
    The aim of this study was to estimate and refine the potential sources of carbon in the atmospheric PM2.5 fraction aerosol at three sampling sites in Hungary. Quantification of total, organic and elemental carbon (TC, OC and EC, respectively), as well as radiocarbon (14C) and stable carbon isotope analyses were performed on exposed filters collected at an urban background site, a suburban background site of the capital of Hungary, Budapest from October 2017 to July 2018. Results were also collected from the rural regional background site of K-puszta. Compared to TC concentrations from other regions of Europe, the ratio of the lowest and highest values at all sites in Hungary are lower than these European locations, probably due to the specific meteorological conditions prevailing in the Carpathian Basin over the observation period. The concentration of OC was constantly higher than that of EC and a seasonal variation with higher values in the heating period (October–March) and lower values in the non-heating vegetation period (April–September) could be observed for both EC and OC fractions. Using 14C, the seasonal mean fraction of contemporary carbon (fC) within the TC varied between 0.50 and 0.78 at the sites, suggesting that modern sources were remarkable during the year, regardless of the heating or vegetation period. At the two urban sites, assuming constant industrial emission during the year, the fossil fuel combustion sources were responsible for the seasonal variation of EC, while modern carbon emissions from biomass-burning and biogenic sources influenced the OC concentration. The higher EC/TC ratios at these sites were associated with lower fC and δ13C values, which can be explained by soot emission from transportation. The notably high EC/TC ratios in the spring were likely caused by the reduced concentration of OC instead of increased EC concentrations. This could probably be caused by the ending of winter biomass burning, which emits a huge amount of OC into the atmosphere. On the contrary, the rural K-puszta site showed some differences relative to the sites in Budapest. No correlation could be revealed between the EC/TC ratio, fC and δ13C results, suggesting that the structure of sources was very stagnant and balanced in each season. In autumn, however, some less depleted values were observed, and agricultural corn-stalk burning after harvesting in the southern and eastern directions from Hungary can be suggested as the main source
    corecore