Vapor sensing properties of a conductive polymer composite containing Nickel particles with nano-scale surface features

This paper presents an unusual conductive polymer composite, produced by Peratech Ltd under the trademark QTC™, which has many vapor sensing applications. Nickel particles are intimately coated by an elastomeric binder such that no percolative conduction can occur. However, the nickel particles are shown to possess spiky nanoscale surface features, which promote conduction by a field-assisted quantum tunneling mechanism. Granular QTC™ can be dispersed into a polymer matrix to produce a vapor sensor. Under exposure to vapor, the polymer swells and the resistance of the composite increases. In this work, granular sensors are subjected to acetone and tetrahydrofuran (THF) vapors. The response for THF shows an increase in resistance of a factor of 108, over a time-scale of a few seconds. This response is larger and faster than many conventional vapor sensing composites. This is a significantly larger response than that obtained historically for the same sensor, suggesting that some degree of sensor aging is desirable. The response and subsequent recovery can be explained by a case II diffusion model, and linked to Hildebrand solubility parameters of the vapor and polymer components

A novel screen-printed multi-component nanocomposite ink with a pressure sensitive electrical resistance functionality

Here, a novel functional ink is described that is composed of multiple nanoscale components and exhibits pronounced touch pressure sensitive electrical properties ideal for applications in switching, sensing and touch sensitive surfaces. The ink can be screen-printed and the as-printed ink displays a large and reproducible touch pressure sensitive electrical resistance and, in contrast to some other composite materials, the resistance changes occur down to the smallest applied pressures. Detailed scanning electron microscopy shows the complex nanoscale structure of the composite that is critical for the electrical behavior. Current-voltage measurements, under static compressive loading, show monotonic non-linear behavior at low compression and ohmic behavior at higher loadings

Balancing livestock production and wildlife conservation in and around southern Africa's transfrontier conservation areas

Biodiversity conservation, of which the transfrontier conservation area movement is an integral part, and more effective livestock production/trade are pivotal to future rural development in southern Africa. For that reason, it is imperative to effectively ameliorate the obstacles that have impeded progress towards the coexistence of these two sectors for more than half a century. Transboundary animal diseases, foot and mouth disease in particular, have been and continue to be the most important of these obstacles. Fortunately, new developments in international sanitary standards applicable to trade in commodities and products derived from animals are beginning to make a solution possible. However, while progress in principle has been achieved, practical implementation remains problematic for technical reasons, exacerbated by inconsistent attitudes towards acceptance of non-traditional international trade standards. This paper describes the background to this situation, progress that has been achieved in the recent past and remaining difficulties that need to be overcome to advance towards achievement of balanced rural development in southern Africa.http://onlinelibrary.wiley.com/journal/10.1111/(ISSN)1865-1682hb2013ab201

Life at the extreme:Plant-driven hotspots of soil nutrient cycling in the hyper-arid core of the Atacama Desert

The hyperarid core of the Atacama Desert represents one of the most intense environments on Earth, often being used as an analog for Mars regolith. The area is characterized by extremes in climate (e.g., temperature, humidity, UV irradiation) and edaphic factors (e.g., hyper-salinity, high pH, compaction, high perchlorates, and low moisture, phosphorus and organic matter). However, the halophytic C4 plant Distichlis spicata appears to be one of the few species on the planet that can thrive in this environment. Within this habitat it captures windblown sand leading to the formation of unique structures and the generation of above-ground phyllosphere soil. Using a combination of approaches (e.g., X-ray Computed Tomography, TXRF, δ13C/δ15N isotope profiling, microbial PLFAs, 14C turnover, phosphate sorption isotherms) we examined the factors regulating the biogeochemical cycling of nitrogen (N), phosphorus (P) and carbon (C) in both vegetated and unvegetated areas. Our results showed that D. spicata rhizomes with large aerenchyma were able to break through the highly cemented topsoil layer leading to root proliferation in the underlying soil. The presence of roots increased soil water content, P availability and induced a change in microbial community structure and promoted microbial growth and activity. In contrast, soil in the phyllosphere exhibited almost no biological activity. Organic C stocks and recent C4 plant derived input increased as follows: phyllosphere (1941 g C m−2; 85% recent) &gt; soils under plants (575–748 g C m−2; 55–60%) &gt; bare soils (491–642 g C m−2; 9–17%). Due to the high levels of nitrate in soil (&gt;2 t ha−1) and high rates of P sorption/precipitation, our data suggest that the microbial activity is both C and P, but not N limited. Root-mediated salt uptake combined with foliar excretion and dispersal of NaCl into the surrounding area indicated that D. spicata was responsible for actively removing ca. 55% of the salt from the rhizosphere. We also demonstrate that NH3 emissions may represent a major N loss pathway from these soil ecosystems during the processing of organic N. We attribute this to NH3 volatilization to the high pH of the soil and slow rates of nitrification. In conclusion, we demonstrate that the extremophile D. spicata physically, chemically and biologically reengineers the soil to create a highly bioactive hotspot within the climate-extreme of the Atacama Desert.</p

International trade standards for commodities and products derived from animals : the need for a system that integrates food safety and animal disease risk management

A case is made for greater emphasis to be placed on value chain management as an alternative to geographically based disease risk mitigation for trade in commodities and products derived from animals. The geographic approach is dependent upon achievement of freedom in countries or zones from infectious agents that cause so-called transboundary animal diseases, while value chain-based risk management depends upon mitigation of animal disease hazards potentially associated with specific commodities or products irrespective of the locality of production. This commodity-specific approach is founded on the same principles upon which international food safety standards are based, viz. hazard analysis critical control points (HACCP). Broader acceptance of a value chain approach enables animal disease risk management to be combined with food safety management by the integration of commodity-based trade and HACCP methodologies and thereby facilitates ‘farm to fork’ quality assurance. The latter is increasingly recognized as indispensable to food safety assurance and is therefore a pre-condition to safe trade. The biological principles upon which HACCP and commodity-based trade are based are essentially identical, potentially simplifying sanitary control in contrast to current separate international sanitary standards for food safety and animal disease risks that are difficult to reconcile. A value chain approach would not only enable more effective integration of food safety and animal disease risk management of foodstuffs derived from animals but would also ameliorate adverse environmental and associated socio-economic consequences of current sanitary standards based on the geographic distribution of animal infections. This is especially the case where vast veterinary cordon fencing systems are relied upon to separate livestock and wildlife as is the case in much of southern Africa. A value chain approach would thus be particularly beneficial to under-developed regions of the world such as southern Africa specifically and sub-Saharan Africa more generally where it would reduce incompatibility between attempts to expand and commercialize livestock production and the need to conserve the subcontinent’s unparalleled wildlife and wilderness resources.US Agency for International Development (USAID) and The Rockefeller Foundationhttp://onlinelibrary.wiley.com/journal/10.1111/(ISSN)1865-1682hb2013ab201

Strong Decays of Light Vector Mesons

The vector meson strong decays rho-->pi pi, phi-->KK, and K^star-->pi K are studied within a covariant approach based on the ladder-rainbow truncation of the QCD Dyson--Schwinger equation for the quark propagator and the Bethe--Salpeter equation for the mesons. The model preserves the one-loop behavior of QCD in the ultraviolet, has two infrared parameters, and implements quark confinement and dynamical chiral symmetry breaking. The 3-point decay amplitudes are described in impulse approximation. The Bethe--Salpeter study motivates a method for estimating the masses for heavier mesons within this model without continuing the propagators into the complex plane. We test the accuracy via the rho, phi and K^{star} masses and then produce estimates of the model results for the a_1 and b_1 masses as well as the mass of the proposed exotic vector pi_1(1400).Comment: Submitted for publication; 10x2-column pages, REVTEX 4, 3 .eps files making 3fig

A novel semi-fragile forensic watermarking scheme for remote sensing images

Peer-reviewedA semi-fragile watermarking scheme for multiple band images is presented. We propose to embed a mark into remote sensing images applying a tree structured vector quantization approach to the pixel signatures, instead of processing each band separately. The signature of themmultispectral or hyperspectral image is used to embed the mark in it order to detect any significant modification of the original image. The image is segmented into threedimensional blocks and a tree structured vector quantizer is built for each block. These trees are manipulated using an iterative algorithm until the resulting block satisfies a required criterion which establishes the embedded mark. The method is shown to be able to preserve the mark under lossy compression (above a given threshold) but, at the same time, it detects possibly forged blocks and their position in the whole image.Se presenta un esquema de marcas de agua semi-frágiles para múltiples imágenes de banda. Proponemos incorporar una marca en imágenes de detección remota, aplicando un enfoque de cuantización del vector de árbol estructurado con las definiciones de píxel, en lugar de procesar cada banda por separado. La firma de la imagen hiperespectral se utiliza para insertar la marca en el mismo orden para detectar cualquier modificación significativa de la imagen original. La imagen es segmentada en bloques tridimensionales y un cuantificador de vector de estructura de árbol se construye para cada bloque. Estos árboles son manipulados utilizando un algoritmo iteractivo hasta que el bloque resultante satisface un criterio necesario que establece la marca incrustada. El método se muestra para poder preservar la marca bajo compresión con pérdida (por encima de un umbral establecido) pero, al mismo tiempo, detecta posiblemente bloques forjados y su posición en la imagen entera.Es presenta un esquema de marques d'aigua semi-fràgils per a múltiples imatges de banda. Proposem incorporar una marca en imatges de detecció remota, aplicant un enfocament de quantització del vector d'arbre estructurat amb les definicions de píxel, en lloc de processar cada banda per separat. La signatura de la imatge hiperespectral s'utilitza per inserir la marca en el mateix ordre per detectar qualsevol modificació significativa de la imatge original. La imatge és segmentada en blocs tridimensionals i un quantificador de vector d'estructura d'arbre es construeix per a cada bloc. Aquests arbres són manipulats utilitzant un algoritme iteractiu fins que el bloc resultant satisfà un criteri necessari que estableix la marca incrustada. El mètode es mostra per poder preservar la marca sota compressió amb pèrdua (per sobre d'un llindar establert) però, al mateix temps, detecta possiblement blocs forjats i la seva posició en la imatge sencera

The Three Dimensional Thirring Model for Small N_f

We formulate the three dimensional Thirring model on a spacetime lattice and study it for various even numbers of fermion flavors N_f by Monte Carlo simulation. We find clear evidence for spontaneous chiral symmetry breaking at strong coupling, contradicting the predictions of the 1/N_f expansion. The critical point appears to correspond to an ultra-violet fixed point of the renormalisation group; a fit to a RG-inspired equation of state in the vicinity of the fixed point yields distinct critical exponents for N_f=2 and N_f=4, while no fit is found for N_f=6, suggesting there is a critical number N_fc<6 beyond which no chiral symmetry breaking occurs. The spectrum of the N_f=2 theory is studied; the states examined vary sharply but continuously across the transition.Comment: 50 pages LaTeX, including 16 tables and 20 figures - uses style file ldd_art.sty (included