485 research outputs found
spectroscopic measurements for deuterium retention and lithium influx studies with lithium limiter on ftu
Spectroscopic measurements to determine deuterium and lithium fluxes were performed in recent experiments on FTU with a liquid lithium limiter (LLL) and an actively cooled limiter (CLL) using a multichannel spectrometer and using LiI–Dα filtered photodiodes. Using the S/XB method in combination with an absolute calibration, measurements of the LiI (670.8nm) and Dβ (464.8nm) spectral lines were used to estimate the deuterium and lithium fluxes from the limiters. The estimation of the lithium fluxes has shown increased values when the CLL is closer towards the last closed magnetic surface (LCMS), according to the measurements of infrared camera. This work shows that the spectroscopic diagnostics in the visible range can be an efficient tool to determine deuterium and liquid metal fluxes in FTU in order to better investigate the interaction between the plasma and the limiter materials. Keywords: Plasma spectroscopy, FTU, Limiter, LLL, CLL, Lithium flu
AppCon: Mitigating evasion attacks to ML cyber detectors
Adversarial attacks represent a critical issue that prevents the reliable integration of machine learning methods into cyber defense systems. Past work has shown that even proficient detectors are highly affected just by small perturbations to malicious samples, and that existing countermeasures are immature. We address this problem by presenting AppCon, an original approach to harden intrusion detectors against adversarial evasion attacks. Our proposal leverages the integration of ensemble learning to realistic network environments, by combining layers of detectors devoted to monitor the behavior of the applications employed by the organization. Our proposal is validated through extensive experiments performed in heterogeneous network settings simulating botnet detection scenarios, and consider detectors based on distinct machine-and deep-learning algorithms. The results demonstrate the effectiveness of AppCon in mitigating the dangerous threat of adversarial attacks in over 75% of the considered evasion attempts, while not being affected by the limitations of existing countermeasures, such as performance degradation in non-adversarial settings. For these reasons, our proposal represents a valuable contribution to the development of more secure cyber defense platforms
dynamic and frequency behaviour of the marfe instability on ftu
The Frascati Tokamak Upgrade (FTU) device can operate at high electron density regimes of the order of 1020m−3, where the MARFE instability is present at various plasma current and magnetic field values. When the MARFE is well developed and oscillating, its movement causes continuous density fluctuation, contaminating the integral density measurements. The amplitude and frequency of these density fluctuations are well revealed by the high resolution interferometer available on FTU, the dependence of the frequency versus basic plasma parameters is investigated in this paper.A specific experimental session on FTU, including some discharges with reversed toroidal magnetic field, and pushing the plasma column towards the internal or external side of the vacuum chamber, respectively, has shown that, when the plasma column is distant from the toroidal limiter, the MARFE is stable and does not oscillate around the mid plane. For these last cases the MARFE localization with respect to the ion drift direction, which can influence the stable and unstable positions, is also discussed. Keywords: Tokamak, MARFE, Greenwald limit, Single particle motion, Ion drift, Plasma radiatio
Evidence of a thermo-diffusion pinch on particle transport in FTU discharges close to density limit
Abstract In FTU, the density profile in the presence of large MARFE becomes more and more peaked with increasing density, forming strong density gradients close to the radial region affected by the MARFE. The temperature at the edge drops to few eV, driving a drop of the whole profile. The estimated particle source cannot justify the change of the density gradient, which instead is well-explained by a change of the pinch. A thermo-diffusion term well-describes the pinch evolution and the experimental behavior of the density at those radii where temperature measurements are reliable
A new indirect measurement method of the electron temperature for the Protosphera's pinch plasma
This article presents a new method for estimating the electron temperature of
the Protosphera's screw pinch. The temperature radial profile is obtained by a
self-consistent modeling of a 1D MHD equilibrium along with a 0D power balance
of the plasma column, given measurements and estimates of the axial pinch
plasma current, of the plasma rotational frequency and, at the equatorial
plane, of the electron density radial profile, of the edge poloidal magnetic
field, of the edge electron temperature and of the neutrals pressure in the
vacuum vessel. The plasma is considered in equilibrium with its neutral phase
and in constant rotation. A MATLAB code has been developed with the aim of
estimating the MHD radial equilibrium profiles, the thermodynamic plasma state
and the neutrals profile. The numerical estimates are compared with available
experimental data showing a good agreement.Comment: 4 pages, 6 figures, 1 table, research presented to the "6th ICFDT
Current drive at plasma densities required for thermonuclear reactors
Progress in thermonuclear fusion energy research based on deuterium plasmas magnetically confined in toroidal tokamak devices requires the development of efficient current drive methods. Previous experiments have shown that plasma current can be driven effectively by externally launched radio frequency power coupled to lower hybrid plasma waves. However, at the high plasma densities required for fusion power plants, the coupled radio frequency power does not penetrate into the plasma core, possibly because of strong wave interactions with the plasma edge. Here we show experiments performed on FTU (Frascati Tokamak Upgrade) based on theoretical predictions that nonlinear interactions diminish when the peripheral plasma electron temperature is high, allowing significant wave penetration at high density. The results show that the coupled radio frequency power can penetrate into high-density plasmas due to weaker plasma edge effects, thus extending the effective range of lower hybrid current drive towards the domain relevant for fusion reactors
Corrigendum: Current drive at plasma densities required for thermonuclear reactors
Nature Communications 1: Article number: 55 (2010); Published: 10 August 2010; Updated:19 September 2013. In Fig. 3 of this Article, the colours of the blue and green curves were accidentally interchanged while the manuscript was being revised. In addition, the x axis labels on Fig. 4 should have read 'Frequency (MHz)'
Notulae to the Italian alien vascular flora: 9
In this contribution, new data concerning the distribution of vascular flora alien to Italy are presented. It
includes new records, confirmations, exclusions, and status changes for Italy or for Italian administrative
regions. Furthermore, three new combinations are proposed. Nomenclatural and distribution updates
published elsewhere are provided as Suppl. material 1
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n  =  2 RMP maintaining good confinement HH(98,y2)≈0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.Peer reviewe
- …