A Study of the LXeGRIT Detection Efficiency for MeV Gamma-Rays during the 2000 Balloon Flight Campaign

LXeGRIT - Liquid Xenon Gamma-Ray Imaging Telescope - is the first prototype of a Compton telescope for \MeV \g-ray astrophysics based on a LXe time projection chamber. One of the most relevant figures of merit for a Compton telescope is the detection efficiency for \g-rays, which depends on diverse contributions such as detector geometry and passive materials, trigger efficiency, dead time, etc. A detailed study of the efficiency of the LXeGRIT instrument, based both on laboratory measurements and Monte Carlo simulations, is presented in this paper.Comment: 20 pages, 15 figures; submitted to NIM

Compton Imaging of MeV Gamma-Rays with the Liquid Xenon Gamma-Ray Imaging Telescope (LXeGRIT)

The Liquid Xenon Gamma-Ray Imaging Telescope (LXeGRIT) is the first realization of a liquid xenon time projection chamber for Compton imaging of MeV gamma-ray sources in astrophysics. By measuring the energy deposit and the three spatial coordinates of individual gamma-ray scattering points, the location of the source in the sky is inferred with Compton kinematics reconstruction. The angular resolution is determined by the detector's energy and spatial resolutions, as well as by the separation in space between the first and second scattering. The imaging response of LXeGRIT was established with gamma-rays from radioactive sources, during calibration and integration at the Columbia Astrophysics Laboratory, prior to the 2000 balloon flight mission. In this paper we describe in detail the various steps involved in imaging sources with LXeGRIT and present experimental results on angular resolution and other parameters which characterize its performance as a Compton telescope.Comment: 22 pages, 20 figures, submitted to NIM

A Monte Carlo analysis of the liquid xenon TPC as gamma ray telescope

Extensive Monte Carlo modeling of a coded aperture x ray telescope based on a high resolution liquid xenon TPC has been performed. Results on efficiency, background reduction capability and source flux sensitivity are presented. We discuss in particular the development of a reconstruction algorithm for events with multiple interaction points. From the energy and spatial information, the kinematics of Compton scattering is used to identify and reduce background events, as well as to improve the detector response in the few MeV region. Assuming a spatial resolution of 1 mm RMS and an energy resolution of 4.5 percent FWHM at 1 MeV, the algorithm is capable of reducing by an order of magnitude the background rate expected at balloon altitude, thus significantly improving the telescope sensitivity

Gator: a low-background counting facility at the Gran Sasso Underground Laboratory

A low-background germanium spectrometer has been installed and is being operated in an ultra-low background shield (the Gator facility) at the Gran Sasso underground laboratory in Italy (LNGS). With an integrated rate of ~0.16 events/min in the energy range between 100-2700 keV, the background is comparable to those of the world's most sensitive germanium detectors. After a detailed description of the facility, its background sources as well as the calibration and efficiency measurements are introduced. Two independent analysis methods are described and compared using examples from selected sample measurements. The Gator facility is used to screen materials for XENON, GERDA, and in the context of next-generation astroparticle physics facilities such as DARWIN.Comment: 14 pages, 6 figures, published versio

Note sulla didattica del progetto

RIFLESSIONI SUL PROGETTO ARCHITETTONICO DALLE ESPERIENZE DI ALCUNI DOCENTI DELLA FACOLTÁ DI ARCHITETTURA DI PALERM

Liquid xenon time projection chamber for gamma rays in the MeV region: Development status

The feasibility of a large volume Liquid Xenon Time Projection Chamber (LXe-TPC) for three dimensional imaging and spectroscopy of cosmic gamma ray sources, was tested with a 3.5 liter prototype. The observation of induction signals produced by MeV gamma rays in liquid xenon is reported, with a good signal-to-noise ratio. The results represent the first experimental demonstration with a liquid xenon ionization chamber of a nondestructive readout of the electron image produced by point-like charges, using a sense wire configuration of the type originally proposed in 1970 by Gatti et al. An energy resolution as good as that previously measured by the millimeter size chambers, was achieved with the large prototype of 4.4 cm drift gap

Design and Performance of the XENON10 Dark Matter Experiment

XENON10 is the first two-phase xenon time projection chamber (TPC) developed within the XENON dark matter search program. The TPC, with an active liquid xenon (LXe) mass of about 14 kg, was installed at the Gran Sasso underground laboratory (LNGS) in Italy, and operated for more than one year, with excellent stability and performance. Results from a dark matter search with XENON10 have been published elsewhere. In this paper, we summarize the design and performance of the detector and its subsystems, based on calibration data using sources of gamma-rays and neutrons as well as background and Monte Carlo simulations data. The results on the detector's energy threshold, energy and position resolution, and overall efficiency show a performance that exceeds design specifications, in view of the very low energy threshold achieved (<10 keVr) and the excellent energy resolution achieved by combining the ionization and scintillation signals, detected simultaneously

RC beams strengthened in shear using the Embedded Through-Section technique: experimental results and analytical formulation

The Embedded Through-Section (ETS) is a recent strengthening technique that has been developed to retrofit existing reinforced concrete (RC) elements with shear reinforcement deficiencies. This technique is based on the execution of holes drilled through the element cross section, in which steel or fiber reinforced polymer (FRP) bars are inserted and bonded to the surrounding concrete with an epoxy adhesive. An experimental program was carried out with RC T-cross section beams strengthened in shear using steel ETS bars. The influence of the inclination and shear strengthening ratio of ETS on the shear strengthening efficiency was evaluated, as well as the interaction of ETS bars with existing steel stirrups. Two different analytical models are presented in this paper in order to calculate the contribution of ETS to shear resistance. The first model follows an empirical approach (experimental-based approach), while the second model takes into account the physical and mechanical principles of the technique (mechanical-based approach). The predictive performance of both models is assessed by using the experimental results.The authors wish to acknowledge the support provided by the CutInov project QREN n. 38780 supported by ADI, and by the Engineering Department of the University of Ferrara

Strong-coupling analysis of scanning tunneling spectra in Bi2_2Sr2_2Ca2_2Cu3_3O10+δ_{10+\delta}

We study a series of spectra measured in the superconducting state of optimally-doped Bi-2223 by scanning tunneling spectroscopy. Each spectrum, as well as the average of spectra presenting the same gap, is fitted using a strong-coupling model taking into account the band structure, the BCS gap, and the interaction of electrons with the spin resonance. After describing our measurements and the main characteristics of the strong-coupling model, we report the whole set of parameters determined from the fits, and we discuss trends as a function of the gap magnitude. We also simulate angle-resolved photoemission spectra, and compare with recent experimental results.Comment: Published versio