81 research outputs found
Spray automated balancing of rotors: Methods and materials
The work described consists of two parts. In the first part, a survey is performed to assess the state of the art in rotor balancing technology as it applies to Army gas turbine engines and associated power transmission hardware. The second part evaluates thermal spray processes for balancing weight addition in an automated balancing procedure. The industry survey reveals that: (1) computerized balancing equipment is valuable to reduce errors, improve balance quality, and provide documentation; (2) slow-speed balancing is used exclusively, with no forseeable need for production high-speed balancing; (3) automated procedures are desired; and (4) thermal spray balancing is viewed with cautious optimism whereas laser balancing is viewed with concern for flight propulsion hardware. The FARE method (Fuel/Air Repetitive Explosion) was selected for experimental evaluation of bond strength and fatigue strength. Material combinations tested were tungsten carbide on stainless steel (17-4), Inconel 718 on Inconel 718, and Triballoy 800 on Inconel 718. Bond strengths were entirely adequate for use in balancing. Material combinations have been identified for use in hot and cold sections of an engine, with fatigue strengths equivalent to those for hand-ground materials
mTOR inhibition and levels of the DNA repair protein MGMT in T98G glioblastoma cells
Background: Glioblastoma multiforme (GBM), the most common and most aggressive type of primary adult brain
tumour, responds poorly to conventional treatment. Temozolomide (TMZ) chemotherapy remains the most commonly
used treatment, despite a large proportion of tumours displaying TMZ resistance. 60% of GBM tumours have
unmethylated MGMT promoter regions, resulting in an overexpression of the DNA repair protein O6
-methylguanine-DNA methyltransferase (MGMT), which is responsible for tumour resistance to TMZ chemotherapy. Tumours also often exhibit hyperactive PI3-kinase/mTOR signalling, which enables them to resynthesise proteins quickly. Since MGMT is a suicide protein that is degraded upon binding to and repairing TMZ-induced O6-methylguanine adducts, it has been hypothesized that inhibition of translation via the mTOR signalling pathway could generate a tumour-specific reduction in MGMT protein and increase TMZ sensitivity.
Methods: MGMT was monitored at the post-transcriptional, translational and protein levels, to determine what
effect mTOR inhibition was having on MGMT protein expression in vitro.
Results: We show that inhibiting mTOR signalling is indeed associated with acute inhibition of protein synthesis.
Western blots show that despite this, relative to loading control proteins, steady state levels of MGMT protein
increased and MGMT mRNA was retained in heavy polysomes. Whilst TMZ treatment resulted in maintained MGMT
protein levels, concomitant treatment of T98G cells with TMZ and KU0063794 resulted in increased MGMT protein
levels without changes in total mRNA levels.
Conclusions: These in vitro data suggest that, counterintuitively, mTOR inhibition may not be a useful adjunct to TMZ therapy and that more investigation is needed before applying mTOR inhibitors in a clinical setting
Risk Based Maintenance Of Turbomachinery.
Tutorialpg. 177-188The authors help maintenance staff compete effectively for
scarce corporate resources. Their presentation defines important
concepts, including expected cost of failure ("risk"), avoided
consequential cost, and value of maintenance/timing decisions.
They link these concepts to maintenance expenditure. They
describe evolving methods for applying them to turbomachinery,
and they illustrate their use in optimizing maintenance strategy for
the corporation
Systemwide Clinical Ultrasound Program Development: An Expert Consensus Model.
Clinical ultrasound (CUS) is integral to the practice of an increasing number of medical specialties. Guidelines are needed to ensure effective CUS utilization across health systems. Such guidelines should address all aspects of CUS within a hospital or health system. These include leadership, training, competency, credentialing, quality assurance and improvement, documentation, archiving, workflow, equipment, and infrastructure issues relating to communication and information technology. To meet this need, a group of CUS subject matter experts, who have been involved in institution- and/or systemwide clinical ultrasound (SWCUS) program development convened. The purpose of this paper was to create a model for SWCUS development and implementation
GT2004-53084 DYNAMIC CHARACTERISTICS OF THE DIVERGING TAPER HONEYCOMB-STATOR SEAL
ABSTRACT This paper introduces a variant on the honeycomb-stator seal, which can extend the already strong stabilizing influence of this seal geometry for centrifugal compressors. The paper presents predicted and measured dynamic characteristics, demonstrating how a clearance, which diverges axially from inlet to outlet, increases the maximum effective damping of a honeycomb-stator seal, even though the average clearance is increased. The results also show a strong negative direct stiffness at zero and low frequency for this seal geometry (termed the "Diverging Taper Honeycomb Seal (DTHCS)"). The predictions are made with ISOTSEAL 1 , software developed at The Texas A&M Turbomachinery Laboratory. The test data, also obtained at the Turbomachinery Laboratory, 1 This code was developed within the Turbomachinery Laboratory, and is not a commercial product (not for sale). confirms the nature and magnitude of both these dynamic characteristics with close fidelity. However, measured leakage falls significantly below predicted leakage. The frequency dependence of the seal dynamic characteristics and the strong negative static stiffness require careful attention in rotor dynamics analysis
Gamma Doradus Stars: Defining a New Class of Pulsating Variables
In this paper we describe a new class of pulsating stars, the prototype of
which is the bright, early, F-type dwarf, Gamma Doradus. These stars typically
have between 1 and 5 periods ranging from 0.4 to 3 days with photometric
amplitudes up to 0.1 in Johnson V. The mechanism for these observed variations
is high-order, low-degree, non-radial, gravity-mode pulsation. Gamma Doradus
stars exhibit variability on a time scale that is an order of magnitude slower
than Delta Scuti stars. They may offer additional insight into stellar physics
when they are better understood (e.g., they may represent the cool portion of
an "iron opacity instability strip" currently formed by the Beta Cephei stars,
the SPB stars, and the subdwarf B stars; they may also offer insight into the
presence of g-modes in solar-like stars).Comment: 15 pages, 1 ps figure. Accepted for publication in PAS
Recommended from our members
ADVANCED RECIPROCATING COMPRESSION TECHNOLOGY (ARCT)
The U.S. natural gas pipeline industry is facing the twin challenges of increased flexibility and capacity expansion. To meet these challenges, the industry requires improved choices in gas compression to address new construction and enhancement of the currently installed infrastructure. The current fleet of installed reciprocating compression is primarily slow-speed integral machines. Most new reciprocating compression is and will be large, high-speed separable units. The major challenges with the fleet of slow-speed integral machines are: limited flexibility and a large range in performance. In an attempt to increase flexibility, many operators are choosing to single-act cylinders, which are causing reduced reliability and integrity. While the best performing units in the fleet exhibit thermal efficiencies between 90% and 92%, the low performers are running down to 50% with the mean at about 80%. The major cause for this large disparity is due to installation losses in the pulsation control system. In the better performers, the losses are about evenly split between installation losses and valve losses. The major challenges for high-speed machines are: cylinder nozzle pulsations, mechanical vibrations due to cylinder stretch, short valve life, and low thermal performance. To shift nozzle pulsation to higher orders, nozzles are shortened, and to dampen the amplitudes, orifices are added. The shortened nozzles result in mechanical coupling with the cylinder, thereby, causing increased vibration due to the cylinder stretch mode. Valve life is even shorter than for slow speeds and can be on the order of a few months. The thermal efficiency is 10% to 15% lower than slow-speed equipment with the best performance in the 75% to 80% range. The goal of this advanced reciprocating compression program is to develop the technology for both high speed and low speed compression that will expand unit flexibility, increase thermal efficiency, and increase reliability and integrity. Retrofit technologies that address the challenges of slow-speed integral compression are: (1) optimum turndown using a combination of speed and clearance with single-acting operation as a last resort; (2) if single-acting is required, implement infinite length nozzles to address nozzle pulsation and tunable side branch absorbers for 1x lateral pulsations; and (3) advanced valves, either the semi-active plate valve or the passive rotary valve, to extend valve life to three years with half the pressure drop. This next generation of slow-speed compression should attain 95% efficiency, a three-year valve life, and expanded turndown. New equipment technologies that address the challenges of large-horsepower, high-speed compression are: (1) optimum turndown with unit speed; (2) tapered nozzles to effectively reduce nozzle pulsation with half the pressure drop and minimization of mechanical cylinder stretch induced vibrations; (3) tunable side branch absorber or higher-order filter bottle to address lateral piping pulsations over the entire extended speed range with minimal pressure drop; and (4) semi-active plate valves or passive rotary valves to extend valve life with half the pressure drop. This next generation of large-horsepower, high-speed compression should attain 90% efficiency, a two-year valve life, 50% turndown, and less than 0.75 IPS vibration. This program has generated proof-of-concept technologies with the potential to meet these ambitious goals. Full development of these identified technologies is underway. The GMRC has committed to pursue the most promising enabling technologies for their industry
Developmental Programming Mediated by Complementary Roles of Imprinted Grb10 in Mother and Pup
Developmental programming links growth in early life with health status in adulthood. Although environmental factors such as maternal diet can influence the growth and adult health status of offspring, the genetic influences on this process are poorly understood. Using the mouse as a model, we identify the imprinted gene Grb10 as a mediator of nutrient supply and demand in the postnatal period. The combined actions of Grb10 expressed in the mother, controlling supply, and Grb10 expressed in the offspring, controlling demand, jointly regulate offspring growth. Furthermore, Grb10 determines the proportions of lean and fat tissue during development, thereby influencing energy homeostasis in the adult. Most strikingly, we show that the development of normal lean/fat proportions depends on the combined effects of Grb10 expressed in the mother, which has the greater effect on offspring adiposity, and Grb10 expressed in the offspring, which influences lean mass. These distinct functions of Grb10 in mother and pup act complementarily, which is consistent with a coadaptation model of imprinting evolution, a model predicted but for which there is limited experimental evidence. In addition, our findings identify Grb10 as a key genetic component of developmental programming, and highlight the need for a better understanding of mother-offspring interactions at the genetic level in predicting adult disease risk
Expression Profiling of Autism Candidate Genes during Human Brain Development Implicates Central Immune Signaling Pathways
The Autism Spectrum Disorders (ASD) represent a clinically heterogeneous set of conditions with strong hereditary components. Despite substantial efforts to uncover the genetic basis of ASD, the genomic etiology appears complex and a clear understanding of the molecular mechanisms underlying Autism remains elusive. We hypothesized that focusing gene interaction networks on ASD-implicated genes that are highly expressed in the developing brain may reveal core mechanisms that are otherwise obscured by the genomic heterogeneity of the disorder. Here we report an in silico study of the gene expression profile from ASD-implicated genes in the unaffected developing human brain. By implementing a biologically relevant approach, we identified a subset of highly expressed ASD-candidate genes from which interactome networks were derived. Strikingly, immune signaling through NFκB, Tnf, and Jnk was central to ASD networks at multiple levels of our analysis, and cell-type specific expression suggested glia—in addition to neurons—deserve consideration. This work provides integrated genomic evidence that ASD-implicated genes may converge on central cytokine signaling pathways
- …