An investigation on the effect of different multi-step heat treatments on the microstructure, texture and mechanical properties of the DED-produced Ti-6Al-4V alloy

This work deals with the effect of different heat treatments on directed energy deposition (DED)-produced Ti- 6Al-4V samples. Annealing treatments at 1050 ◦C followed by different cooling rates were conducted to allow a complete recrystallization of the microstructure and remove the columnar prior-β grains, thus increasing the overall isotropy of the material. An agine treatment at 540 ◦ C was also performed for further microstructural stabilization. The microstructures, textures and mechanical properties were then assessed. Due to the heat treatments, greatly differing microstructures were achieved in an equiaxed grain morphology. However, a “grain memory” effect was detected which resulted in the grains size increasing along the height of the samples. This effect was correlated to the intrinsic prior-β grain width variation along Z on the as-printed specimens, typical of the DED technology. Electron backscatter diffraction analyses proved that the intensity of the preferential di- rections increased after the heat treatments, likely due to the crystallographic variant selection mechanisms taking place when the samples cool down from the annealing temperature. This effect is also influenced by the significant difference in terms of prior-β grains sizes between the heat-treated and the as-printed specimens. To sum up, a complete homogenization of the material via heat treatment above the β-transus temperature proved to be challenging. In fact, the data suggest that the intrinsic texture-related anisotropy granted by the manufacturing process is very difficult to be eliminated

Effect of heat treatment on microstructural evolution of additively manufactured Inconel 718 and cast alloy

Additive manufacturing (AM) processes facilitate the fabrication of complex shape metallic components directly from Computer-Aided Design models, which may be challenging to be produced using conventional manufacturing technologies. However, it is revealed that additively manufactured components usually have non-equilibrium microstructures. Thus, post-built heat treatments are recommended for AM components to achieve homogenous microstructures. In this study, the effects of solution annealing and ageing treatments on the microstructure evolution of Inconel 718 alloy processed by laser powder bed fusion (LPBF) and directed energy deposition (DED) processes are compared with those produced by casting. Microstructural characterization techniques including OM, SEM/EDS analysis were employed on AM and cast components to obtain more information regarding the microstructure and phase evolution during these heat treatments. These microstructural studies demonstrate that the starting microstructure could play a key role in the microstructural evolution during the heat treatment of Inconel 718 alloy

Study of exclusive one-pion and one-eta production using hadron and dielectron channels in pp reactions at kinetic beam energies of 1.25 GeV and 2.2 GeV with HADES

We present measurements of exclusive ensuremathπ+,0 and η production in pp reactions at 1.25GeV and 2.2GeV beam kinetic energy in hadron and dielectron channels. In the case of π+ and π0 , high-statistics invariant-mass and angular distributions are obtained within the HADES acceptance as well as acceptance-corrected distributions, which are compared to a resonance model. The sensitivity of the data to the yield and production angular distribution of Δ (1232) and higher-lying baryon resonances is shown, and an improved parameterization is proposed. The extracted cross-sections are of special interest in the case of pp → pp η , since controversial data exist at 2.0GeV; we find \ensuremathσ=0.142±0.022 mb. Using the dielectron channels, the π0 and η Dalitz decay signals are reconstructed with yields fully consistent with the hadronic channels. The electron invariant masses and acceptance-corrected helicity angle distributions are found in good agreement with model predictions

Strategies for preventing group B streptococcal infections in newborns: A nation-wide survey of Italian policies

Background: There are no Italian data regarding the strategies for preventing neonatal group B streptococcal (GBS) infection. We conducted a national survey in order to explore obstetrical, neonatal and microbiological practices for the GBS prevention. Methods: Three distinct questionnaires were sent to obstetricians, neonatologists and microbiologists. Questionnaires included data on prenatal GBS screening, maternal risk factors, intrapartum antibiotic prophylaxis, microbiological information concerning specimen processing and GBS antimicrobial susceptibility. Results: All respondent obstetrical units used the culture-based screening approach to identify women who should receive intrapartum antibiotic prophylaxis, and more than half of the microbiological laboratories (58%) reported using specimen processing consistent with CDC guidelines. Most neonatal units (89 out of 107, 82%) reported using protocols for preventing GBS early-onset sepsis consistent with CDC guidelines. Conclusions: The screening-based strategy is largely prevalent in Italy, and most protocols for preventing GBS early-onset sepsis are consistent with CDC guidelines. However, we found discrepancies in practices among centers that may reflect the lack of Italian guidelines issued by public health organizations

NEOTROPICAL CARNIVORES: a data set on carnivore distribution in the Neotropics

Mammalian carnivores are considered a key group in maintaining ecological health and can indicate potential ecological integrity in landscapes where they occur. Carnivores also hold high conservation value and their habitat requirements can guide management and conservation plans. The order Carnivora has 84 species from 8 families in the Neotropical region: Canidae; Felidae; Mephitidae; Mustelidae; Otariidae; Phocidae; Procyonidae; and Ursidae. Herein, we include published and unpublished data on native terrestrial Neotropical carnivores (Canidae; Felidae; Mephitidae; Mustelidae; Procyonidae; and Ursidae). NEOTROPICAL CARNIVORES is a publicly available data set that includes 99,605 data entries from 35,511 unique georeferenced coordinates. Detection/non-detection and quantitative data were obtained from 1818 to 2018 by researchers, governmental agencies, non-governmental organizations, and private consultants. Data were collected using several methods including camera trapping, museum collections, roadkill, line transect, and opportunistic records. Literature (peer-reviewed and grey literature) from Portuguese, Spanish and English were incorporated in this compilation. Most of the data set consists of detection data entries (n = 79,343; 79.7%) but also includes non-detection data (n = 20,262; 20.3%). Of those, 43.3% also include count data (n = 43,151). The information available in NEOTROPICAL CARNIVORES will contribute to macroecological, ecological, and conservation questions in multiple spatio-temporal perspectives. As carnivores play key roles in trophic interactions, a better understanding of their distribution and habitat requirements are essential to establish conservation management plans and safeguard the future ecological health of Neotropical ecosystems. Our data paper, combined with other large-scale data sets, has great potential to clarify species distribution and related ecological processes within the Neotropics. There are no copyright restrictions and no restriction for using data from this data paper, as long as the data paper is cited as the source of the information used. We also request that users inform us of how they intend to use the data

NEOTROPICAL ALIEN MAMMALS: a data set of occurrence and abundance of alien mammals in the Neotropics

Biological invasion is one of the main threats to native biodiversity. For a species to become invasive, it must be voluntarily or involuntarily introduced by humans into a nonnative habitat. Mammals were among first taxa to be introduced worldwide for game, meat, and labor, yet the number of species introduced in the Neotropics remains unknown. In this data set, we make available occurrence and abundance data on mammal species that (1) transposed a geographical barrier and (2) were voluntarily or involuntarily introduced by humans into the Neotropics. Our data set is composed of 73,738 historical and current georeferenced records on alien mammal species of which around 96% correspond to occurrence data on 77 species belonging to eight orders and 26 families. Data cover 26 continental countries in the Neotropics, ranging from Mexico and its frontier regions (southern Florida and coastal-central Florida in the southeast United States) to Argentina, Paraguay, Chile, and Uruguay, and the 13 countries of Caribbean islands. Our data set also includes neotropical species (e.g., Callithrix sp., Myocastor coypus, Nasua nasua) considered alien in particular areas of Neotropics. The most numerous species in terms of records are from Bos sp. (n = 37,782), Sus scrofa (n = 6,730), and Canis familiaris (n = 10,084); 17 species were represented by only one record (e.g., Syncerus caffer, Cervus timorensis, Cervus unicolor, Canis latrans). Primates have the highest number of species in the data set (n = 20 species), partly because of uncertainties regarding taxonomic identification of the genera Callithrix, which includes the species Callithrix aurita, Callithrix flaviceps, Callithrix geoffroyi, Callithrix jacchus, Callithrix kuhlii, Callithrix penicillata, and their hybrids. This unique data set will be a valuable source of information on invasion risk assessments, biodiversity redistribution and conservation-related research. There are no copyright restrictions. Please cite this data paper when using the data in publications. We also request that researchers and teachers inform us on how they are using the data