Anomalous optical surface absorption in nominally pure silicon samples at 1550 nm

The announcement of the direct detection of Gravitational Waves (GW) by the LIGO and Virgo collaboration in February 2016 has removed any uncertainty around the possibility of GW astronomy. It has demonstrated that future detectors with sensitivities ten times greater than the Advanced LIGO detectors would see thousands of events per year. Many proposals for such future interferometric GW detectors assume the use of silicon test masses. Silicon has low mechanical loss at low temperatures, which leads to low displacement noise for a suspended interferometer mirror. In addition to the low mechanical loss, it is a requirement that the test masses have a low optical loss. Measurements at 1550 nm have indicated that material with a low enough bulk absorption is available; however there have been suggestions that this low absorption material has a surface absorption of > 100 ppm which could preclude its use in future cryogenic detectors. We show in this paper that this surface loss is not intrinsic but is likely to be a result of particular polishing techniques and can be removed or avoided by the correct polishing procedure. This is an important step towards high gravitational wave detection rates in silicon based instruments

Effect of stress and temperature on the optical properties of silicon nitride membranes at 1550 nm

Future gravitational-wave detectors operated at cryogenic temperatures are expected to be limited by thermal noise of the highly reflective mirror coatings. Silicon nitride is an interesting material for such coatings as it shows very low mechanical loss, a property related to low thermal noise, which is known to further decrease under stress. Low optical absorption is also required to maintain the low mirror temperature. Here, we investigate the effect of stress on the optical properties at 1,550 nm of silicon nitride membranes attached to a silicon frame. Our approach includes the measurement of the thermal expansion coefficient and the thermal conductivity of the membranes. The membrane and frame temperatures are varied, and translated into a change in stress using finite element modeling. The resulting product of the optical absorption and thermo-optic coefficient (dn/dT) is measured using photothermal common-path interferometry

Isolated and non-isolated dwarfs in terms of modified Newtonian dynamics

Within the framework of modified Newtonian dynamics (MOND) we investigate the kinematics of two dwarf spiral galaxies belonging to very different environments, namely KK 246 in the Local Void and Holmberg II in the M81 group. A mass model of the rotation curve of KK 246 is presented for the first time, and we show that its observed kinematics are consistent with MOND. We re-derive the outer rotation curve of Holmberg II, by modelling its HI data cube, and find that its inclination should be closer to face-on than previously derived. This implies that Holmberg II has a higher rotation velocity in its outer parts, which, although not very precisely constrained, is consistent with the MOND prediction.Comment: Accepted in A&A as a Research Note. 6 pages, 3 figure

Effects of static and dynamic higher-order optical modes in balanced homodyne readout for future gravitational waves detectors

With the recent detection of Gravitational waves (GW), marking the start of the new field of GW astronomy, the push for building more sensitive laser-interferometric gravitational wave detectors (GWD) has never been stronger. Balanced homodyne detection (BHD) allows for a quantum noise (QN) limited readout of arbitrary light field quadratures, and has therefore been suggested as a vital building block for upgrades to Advanced LIGO and third generation observatories. In terms of the practical implementation of BHD, we develop a full framework for analyzing the static optical high order modes (HOMs) occurring in the BHD paths related to the misalignment or mode matching at the input and output ports of the laser interferometer. We find the effects of HOMs on the quantum noise limited sensitivity is independent of the actual interferometer configuration, e.g. Michelson and Sagnac interferometers are effected in the same way. We show that misalignment of the output ports of the interferometer (output misalignment) only effects the high frequency part of the quantum noise limited sensitivity (detection noise). However, at low frequencies, HOMs reduce the interferometer response and the radiation pressure noise (back action noise) by the same amount and hence the quantum noise limited sensitivity is not negatively effected in that frequency range. We show that the misalignment of laser into the interferometer (input misalignment) produces the same effect as output misalignment and additionally decreases the power inside the interferometer. We also analyze dynamic HOM effects, such as beam jitter created by the suspended mirrors of the BHD. Our analyses can be directly applied to any BHD implementation in a future GWD. Moreover, we apply our analytical techniques to the example of the speed meter proof of concept experiment under construction in Glasgow. We find that for our experimental parameters, the performance of our seismic isolation system in the BHD paths is compatible with the design sensitivity of the experiment

Demonstration of a switchable damping system to allow low-noise operation of high-Q low-mass suspension systems

Low mass suspension systems with high-Q pendulum stages are used to enable quantum radiation pressure noise limited experiments. Utilising multiple pendulum stages with vertical blade springs and materials with high quality factors provides attenuation of seismic and thermal noise, however damping of these high-Q pendulum systems in multiple degrees of freedom is essential for practical implementation. Viscous damping such as eddy-current damping can be employed but introduces displacement noise from force noise due to thermal fluctuations in the damping system. In this paper we demonstrate a passive damping system with adjustable damping strength as a solution for this problem that can be used for low mass suspension systems without adding additional displacement noise in science mode. We show a reduction of the damping factor by a factor of 8 on a test suspension and provide a general optimisation for this system.Comment: 5 pages, 5 figure

Galactic kinematics with modified Newtonian dynamics

We look for observational signatures that could discriminate between Newtonian and modified Newtonian (MOND) dynamics in the Milky Way, in view of the advent of large astrometric and spectroscopic surveys. Indeed, a typical signature of MOND is an apparent disk of "phantom" dark matter, which is uniquely correlated with the visible disk-density distribution. Due to this phantom dark disk, Newtonian models with a spherical halo have different signatures from MOND models close to the Galactic plane. The models can thus be differentiated by measuring dynamically (within Newtonian dynamics) the disk surface density at the solar radius, the radial mass gradient within the disk, or the velocity ellipsoid tilt angle above the Galactic plane. Using the most realistic possible baryonic mass model for the Milky Way, we predict that, if MOND applies, the local surface density measured by a Newtonist will be approximately 78 Msun/pc2 within 1.1 kpc of the Galactic plane, the dynamically measured disk scale-length will be enhanced by a factor of 1.25 with respect to the visible disk scale-length, and the local vertical tilt of the velocity ellipsoid at 1 kpc above the plane will be approximately 6 degrees. None of these tests can be conclusive for the present-day accuracy of Milky Way data, but they will be of prime interest with the advent of large surveys such as GAIA.Comment: 5 page

Mirror coating solution for the cryogenic Einstein telescope

Planned, cryogenic gravitational-wave detectors will require improved coatings with a strain thermal noise reduced by a factor of 25 compared to Advanced LIGO. In this article, we present investigations of HfO2 doped with SiO2 as a new coating material for future detectors. Our measurements show an extinction coefficient of k=6×10−6 and a mechanical loss of ϕ=3.8×10−4 at 10,K, which is a factor of 2 below that of SiO2, the currently used low refractive-index coating material. These properties make HfO2 doped with SiO2 ideally suited as a low-index partner material for use with a-Si in the lower part of a multimaterial coating. Based on these results we present a multimaterial coating design which, for the first time, can simultaneously meet the strict requirements on optical absorption and thermal noise of the cryogenic Einstein Telescope

Trainable segmentation for transmission electron microscope images of inorganic nanoparticles

We present a trainable segmentation method implemented within the python package ParticleSpy. The method takes user labelled pixels, which are used to train a classifier and segment images of inorganic nanoparticles from transmission electron microscope images. This implementation is based on the trainable Waikato Environment for Knowledge Analysis (WEKA) segmentation, but is written in python, allowing a large degree of flexibility and meaning it can be easily expanded using other python packages. We find that trainable segmentation offers better accuracy than global or local thresholding methods and requires as few as 100 user-labelled pixels to produce an accurate segmentation. Trainable segmentation presents a balance of accuracy and training time between global/local thresholding and neural networks, when used on transmission electron microscope images of nanoparticles. We also quantitatively investigate the effectiveness of the components of trainable segmentation, its filter kernels and classifiers, in order to demonstrate the use cases for the different filter kernels in ParticleSpy and the most accurate classifiers for different data types. A set of filter kernels is identified that are effective in distinguishing particles from background but that retain dissimilar features. In terms of classifiers, we find that different classifiers perform optimally for different image contrast; specifically, a random forest classifier performs best for high-contrast ADF images, but that QDA and Gaussian Naïve Bayes classifiers perform better for low-contrast TEM images

Young People, Biographical Narratives and the Life Grid: Young People's Accounts of Parental Substance Use

Research into potentially sensitive issues with young people presents numerous methodological and ethical challenges. While recent studies have highlighted the advantages of task-based activities in research with young people, the literature on life history research provides few suggestions as to effective and appropriate research tools for encouraging young people to tell their stories. This paper explores the contribution that may be made to such research by the life grid, a visual tool for mapping important life events against the passage of time and prompting wide-ranging discussion. Critical advantages of the life grid in qualitative research include: its visual element which can help to engage interviewer and interviewee in a process of constructing and reflecting on a concrete life history record; its role in creating a more relaxed research encounter supportive of the respondent’s ‘voice’; and facilitating the discussion of sensitive issues. In addition, the way in which use of the grid anchors such narratives in accounts of everyday life, often revealing interesting tensions, is explored. These points are discussed with reference to an exploratory study of young people’s experience of parental substance use

The VPOS: a vast polar structure of satellite galaxies, globular clusters and streams around the Milky Way

It has been known for a long time that the satellite galaxies of the Milky Way (MW) show a significant amount of phase-space correlation, they are distributed in a highly inclined Disc of Satellites (DoS). We have extended the previous studies on the DoS by analysing for the first time the orientations of streams of stars and gas, and the distributions of globular clusters within the halo of the MW. It is shown that the spatial distribution of MW globular clusters classified as young halo clusters (YH GC) is very similar to the DoS, while 7 of the 14 analysed streams align with the DoS. The probability to find the observed clustering of streams is only 0.3 per cent when assuming isotropy. The MW thus is surrounded by a vast polar structure (VPOS) of subsystems (satellite galaxies, globular clusters and streams), spreading from Galactocentric distances as small as 10 kpc out to 250 kpc. These findings demonstrate that a near-isotropic infall of cosmological sub-structure components onto the MW is essentially ruled out because a large number of infalling objects would have had to be highly correlated, to a degree not natural for dark matter sub-structures. The majority of satellites, streams and YH GCs had to be formed as a correlated population. This is possible in tidal tails consisting of material expelled from interacting galaxies. We discuss the tidal scenario for the formation of the VPOS, including successes and possible challenges. The potential consequences of the MW satellites being tidal dwarf galaxies are severe. If all the satellite galaxies and YH GCs have been formed in an encounter between the young MW and another gas-rich galaxy about 10-11 Gyr ago, then the MW does not have any luminous dark-matter substructures and the missing satellites problem becomes a catastrophic failure of the standard cosmological model.Comment: 21 pages, 8 figures, 2 tables. Accepted for publication in MNRAS. An animation of Figure 5 can be found at http://youtu.be/nUwxv-WGfH