PPM/NAR 8.4-GHz noise temperature statistics for DSN 64-meter antennas, 1982-1984

From August 1982 through November 1984, X-band downlink (8.4-GHz) system noise temperature measurements were made on the DSN 64-m antennas during tracking periods. Statistics of these noise temperature values are needed by the DSN and by spacecraft mission planners to assess antenna, receiving, and telemetry system needs, present performance, and future performance. These measurements were made using the DSN Mark III precision power monitor noise-adding radiometers located at each station. It is found that for DSS 43 and DSS 63, at the 90% cumulative distribution level, equivalent zenith noise temperature values fall between those presented in the earlier (1977) and present (1983) versions of DSN/Flight Project design documents. Noise temperatures measured for DSS 14 (Goldstone) are higher than those given in existing design documents and this disagreement will be investigated as a diagnostic of possible PPM or receiving system performance problems

Experimental study of laser dissimilar joining for Usibor 2000 and Al-T7075 with Tepex 102

Due to the needs of weight reduction in the automobile structures and of time reduction in the Body-In-White (BIW) manufacturing stage, effective and accurate dissimilar joining is demanded to take advantage of metal-polymer structures. Automotive industry is highly interested in the combination of metal alloys and composite materials; however, dissimilar joining of this type of materials without using mechanic or adhesive joining is a challenge. As an alternative to the classical joining techniques, laser technology can be used to join dissimilar materials. In laser direct joining, a laser beam is used to heat the metal and by conduction to heat the polymer up to melting temperature in the interface without reaching degradation temperature. In this work, an experimental procedure is proposed to set the basis of dissimilar joining between metal and composite parts for the automobile industry. To do that, laser texturing on metallic parts was studied and a wide battery of experimental test were performed to obtain the proper joining process parameters for dissimilar joining between Usibor 2000 and Al-T7075 with Tepex 102. Results show that is possible to reach over 17 MPa in lap shear adhesion test which is similar to the performance of typical adhesives used in automotive industry.Authors wish to thank Basque Country Government for financial support provided through MULTIMAT project Elkartek KK2017/00088 as well as the Spanish Industry ministry for support provided in INTEGRADDI project DPI 2016-79889

Applying X-ray Imaging Crystal Spectroscopy for Use as a High Temperature Plasma Diagnostic

X-ray spectra provide a wealth of information on high temperature plasmas; for example electron temperature and density can be inferred from line intensity ratios. By using a Johann spectrometer viewing the plasma, it is possible to construct profiles of plasma parameters such as density, temperature, and velocity with good spatial and time resolution. However, benchmarking atomic code modeling of X-ray spectra obtained from well-diagnosed laboratory plasmas is important to justify use of such spectra to determine plasma parameters when other independent diagnostics are not available. This manuscript presents the operation of the High Resolution X-ray Crystal Imaging Spectrometer with Spatial Resolution (HIREXSR), a high wavelength resolution spatially imaging X-ray spectrometer used to view hydrogen- and helium-like ions of medium atomic number elements in a tokamak plasma. In addition, this manuscript covers a laser blow-off system that can introduce such ions to the plasma with precise timing to allow for perturbative studies of transport in the plasma. Keywords: Engineering, Issue 114, X-Ray Spectroscopy, Crystal Spectroscopy, Plasma Physics, Fusion, Tokamaks, Plasma DiagnosticsUnited States. Department of Energy (Contract DE-FC02-99ER54512)United States. Department of Energy (Contract DE-AC02-76CH03073

Hepatic artery thrombosis after pediatric liver transplantation a medical or surgical event

Hepatic artery thrombosis (HAT) is one of the most serious complications after orthotopic liver transplan¬tation, and is associated with a high morbidity and mor¬tality. This study retrospectively reviewed 66 liver transplants in children under the age of 10 years during1 a year-long period at a single institution.;A, total of 28 perioperative variables were analyzed to identify responsible factors of HAT. Of the 66 children, 18 (26%) developed HAT within 15 days after the transplant (HAT group); 29 (42%) had an uneventful postoperative course (control group). To avoid the possible influence of other complications 19 patients were excluded. Of the variables compared between the 2 study groups, three surgical factors (diameter of the hepatic artery-- greater or less than 3 mm; type of arterial anastomosis—end-to-end versus the use of an iliac graft or aortic conduit; and number of times the anastomosis was redone--one versus more than one), were found to be significantly different (P<.05) between HAT and control groups. Two medical factors also were significantly different: the use of intraoperative transfusion of fresh frozen plasma (FFP) and the administration of postoperative prophylactic anticoagulant treatment. A heparin and dextran-40 protocol appeared to be effective in preventing HAT (P<.02). Moreover, after multivariate analysis, anticoagulation therapy was demonstrated to with poor hepatic artery flow. © 1989 by The Williams and Wilkins Co

Higher-Order Multicuts for Geometric Model Fitting and Motion Segmentation

Minimum cost lifted multicut problem is a generalization of the multicut problem and is a means to optimizing a decomposition of a graph w.r.t. both positive and negative edge costs. Its main advantage is that multicut-based formulations do not require the number of components given a priori; instead, it is deduced from the solution. However, the standard multicut cost function is limited to pairwise relationships between nodes, while several important applications either require or can benefit from a higher-order cost function, i.e. hyper-edges. In this paper, we propose a pseudo-boolean formulation for a multiple model fitting problem. It is based on a formulation of any-order minimum cost lifted multicuts, which allows to partition an undirected graph with pairwise connectivity such as to minimize costs defined over any set of hyper-edges. As the proposed formulation is NP-hard and the branch-and-bound algorithm is too slow in practice, we propose an efficient local search algorithm for inference into resulting problems. We demonstrate versatility and effectiveness of our approach in several applications: geometric multiple model fitting, homography and motion estimation, motion segmentation

Superconductivity and charge carrier localization in ultrathin La1.85Sr0.15CuO4/La2CuO4\mathbf{{La_{1.85}Sr_{0.15}CuO_4}/{La_2CuO_4}} bilayers

$\mathrm{La_{1.85}Sr_{0.15}CuO_4}$/$\mathrm{La_2CuO_4}$ (LSCO15/LCO) bilayers with a precisely controlled thickness of N unit cells (UCs) of the former and M UCs of the latter ([LSCO15\_N/LCO\_M]) were grown on (001)-oriented {\slao} (SLAO) substrates with pulsed laser deposition (PLD). X-ray diffraction and reciprocal space map (RSM) studies confirmed the epitaxial growth of the bilayers and showed that a [LSCO15\_2/LCO\_2] bilayer is fully strained, whereas a [LSCO15\_2/LCO\_7] bilayer is already partially relaxed. The \textit{in situ} monitoring of the growth with reflection high energy electron diffraction (RHEED) revealed that the gas environment during deposition has a surprisingly strong effect on the growth mode and thus on the amount of disorder in the first UC of LSCO15 (or the first two monolayers of LSCO15 containing one $\mathrm{CuO_2}$ plane each). For samples grown in pure $\mathrm{N_2O}$ gas (growth type-B), the first LSCO15 UC next to the SLAO substrate is strongly disordered. This disorder is strongly reduced if the growth is performed in a mixture of $\mathrm{N_2O}$ and $\mathrm{O_2}$ gas (growth type-A). Electric transport measurements confirmed that the first UC of LSCO15 next to the SLAO substrate is highly resistive and shows no sign of superconductivity for growth type-B, whereas it is superconducting for growth type-A. Furthermore, we found, rather surprisingly, that the conductivity of the LSCO15 UC next to the LCO capping layer strongly depends on the thickness of the latter. A LCO capping layer with 7~UCs leads to a strong localization of the charge carriers in the adjacent LSCO15 UC and suppresses superconductivity. The magneto-transport data suggest a similarity with the case of weakly hole doped LSCO single crystals that are in a so-called {"{cluster-spin-glass state}"

Description of Three Species of \u3ci\u3eIsorchis\u3c/i\u3e (Digenea: Atractotrematidae) from Australia

Three species of Isorchis Durio and Manter, 1969 are described from Australian waters. Isorchis megas sp. nov. is described from the spotbanded scat, Selenotoca multifasciata (Richardson), off Western Australia (WA) and Northern Territory (NT); Isorchis currani sp. nov. is described from S. multifasciata off NT; and Isorchis anomalus sp. nov. is described from the milkfish, Chanos chanos Forsskål, off WA. Isorchis megas sp. nov. can be differentiated from the other species of Isorchis by possessing a single, large egg that is greater than 20% of the body length; having a shorter body (the largest specimen is less than 500 μm); and utilizing a scatophagid rather than a chanid host. Isorchis currani sp. nov. can be differentiated from all other species of Isorchis in possessing an irregular-shaped genital pore rather than one that is circular to oblong. A Bayesian inference analysis of partial 28S rDNA sequences of the three new species of Isorchis and 30 other haploporoids revealed (1) the monophyly of the Atractotrematidae Yamaguti, 1939, (2) the two species of Isorchis infecting S. multifasciata were each other\u27s closest relative, and (3) that Isorchis was most closely related to Pseudomegasolena Machida and and Komiya, 1976 rather than Atractotrema Goto and Ozaki, 1929 although sequence data are not yet available for a member of Pseudisorchis Ahmad, 1985