85 research outputs found
Exploration on continuous Gaussian process frontier maps
© 2014 IEEE. An information-driven autonomous robotic exploration method on a continuous representation of unknown environments is proposed in This paper. The approach conveniently handles sparse sensor measurements To build a continuous model of The environment That exploits structural dependencies without The need To resort To a fixed resolution grid map. A gradient field of occupancy probability distribution is regressed from sensor data as a Gaussian process providing frontier boundaries for further exploration. The resulting continuous global frontier surface completely describes unexplored regions and, inherently, provides an automatic stop criterion for a desired sensitivity. The performance of The proposed approach is evaluated Through simulation results in The well-known Freiburg and Cave maps
Exploration in Information Distribution Maps
In this paper, a novel solution for autonomous robotic exploration is proposed. The distribution of information in an unknown environment is modeled as an unsteady diffusion process, which can be an appropriate mathematical formulation and analogy for expanding, time-varying, and dynamic environments. This information distribution map is the solution of the diffusion process partial differential equation, and is regressed from sensor data as a Gaussian Process. Optimization of the process parameters leads to an optimal frontier map which describes regions of interest for further exploration. Since the presented approach considers a continuous model of the environment, it can be used to plan smooth exploration paths exploiting the structural dependencies of the environment whilst handling sparse sensors measurements. The performance of the proposed approach is evaluated through simulation results in the well-known Freiburg and Cave maps
Localization in highly dynamic environments using dual-timescale NDT-MCL
Industrial environments are rarely static and often their configuration is continuously changing due to the material transfer flow. This is a major challenge for infrastructure free localization systems. In this paper we address this challenge by introducing a localization approach that uses a dual- timescale approach. The proposed approach - Dual-Timescale Normal Distributions Transform Monte Carlo Localization (DT- NDT-MCL) - is a particle filter based localization method, which simultaneously keeps track of the pose using an apriori known static map and a short-term map. The short-term map is continuously updated and uses Normal Distributions Transform Occupancy maps to maintain the current state of the environment. A key novelty of this approach is that it does not have to select an entire timescale map but rather use the best timescale locally. The approach has real-time performance and is evaluated using three datasets with increasing levels of dynamics. We compare our approach against previously pro- posed NDT-MCL and commonly used SLAM algorithms and show that DT-NDT-MCL outperforms competing algorithms with regards to accuracy in all three test cases.This work has been supported by the European Commission under contract number FP7-ICT-600877 (SPENCER) and by the Spanish Ministry of Economy and Competitiveness under Project DPI-2011-27510 and the EU Project CargoAnts FP7-605598.Peer Reviewe
The AEROARMS Project: Aerial Robots with Advanced Manipulation Capabilities for Inspection and Maintenance
This article summarizes new aerial robotic manipulation technologies and methods—aerial robotic manipulators with dual arms and multidirectional thrusters—developed in the AEROARMS project for outdoor industrial inspection and maintenance (I&M). Our report deals with the control systems, including the control of the interaction forces and the compliance the teleoperation, which uses passivity to tackle the tradeoff between stability and performance the perception methods for localization, mapping, and inspection the planning methods, including a new control-aware approach for aerial manipulation.
Finally, we describe a novel industrial platform with multidirectional thrusters and a new arm design to increase the robustness in industrial contact inspections. In addition, the lessons learned in applying the platform to outdoor aerial manipulation for I&M are pointed out
SLAM algorithm applied to robotics assistance for navigation in unknown environments
<p>Abstract</p> <p>Background</p> <p>The combination of robotic tools with assistance technology determines a slightly explored area of applications and advantages for disability or elder people in their daily tasks. Autonomous motorized wheelchair navigation inside an environment, behaviour based control of orthopaedic arms or user's preference learning from a friendly interface are some examples of this new field. In this paper, a Simultaneous Localization and Mapping (SLAM) algorithm is implemented to allow the environmental learning by a mobile robot while its navigation is governed by electromyographic signals. The entire system is part autonomous and part user-decision dependent (semi-autonomous). The environmental learning executed by the SLAM algorithm and the low level behaviour-based reactions of the mobile robot are robotic autonomous tasks, whereas the mobile robot navigation inside an environment is commanded by a Muscle-Computer Interface (MCI).</p> <p>Methods</p> <p>In this paper, a sequential Extended Kalman Filter (EKF) feature-based SLAM algorithm is implemented. The features correspond to lines and corners -concave and convex- of the environment. From the SLAM architecture, a global metric map of the environment is derived. The electromyographic signals that command the robot's movements can be adapted to the patient's disabilities. For mobile robot navigation purposes, five commands were obtained from the MCI: turn to the left, turn to the right, stop, start and exit. A kinematic controller to control the mobile robot was implemented. A low level behavior strategy was also implemented to avoid robot's collisions with the environment and moving agents.</p> <p>Results</p> <p>The entire system was tested in a population of seven volunteers: three elder, two below-elbow amputees and two young normally limbed patients. The experiments were performed within a closed low dynamic environment. Subjects took an average time of 35 minutes to navigate the environment and to learn how to use the MCI. The SLAM results have shown a consistent reconstruction of the environment. The obtained map was stored inside the Muscle-Computer Interface.</p> <p>Conclusions</p> <p>The integration of a highly demanding processing algorithm (SLAM) with a MCI and the communication between both in real time have shown to be consistent and successful. The metric map generated by the mobile robot would allow possible future autonomous navigation without direct control of the user, whose function could be relegated to choose robot destinations. Also, the mobile robot shares the same kinematic model of a motorized wheelchair. This advantage can be exploited for wheelchair autonomous navigation.</p
Decentralized Sensor Fusion for Ubiquitous Networking Robotics in Urban Areas
In this article we explain the architecture for the environment and sensors that has been built for the European project URUS (Ubiquitous Networking Robotics in Urban Sites), a project whose objective is to develop an adaptable network robot architecture for cooperation between network robots and human beings and/or the environment in urban areas. The project goal is to deploy a team of robots in an urban area to give a set of services to a user community. This paper addresses the sensor architecture devised for URUS and the type of robots and sensors used, including environment sensors and sensors onboard the robots. Furthermore, we also explain how sensor fusion takes place to achieve urban outdoor execution of robotic services. Finally some results of the project related to the sensor network are highlighted
- …