325 research outputs found

    Kwafina: internationalization plan

    Get PDF
    This Work Project develops a possible suggestion of how and where Kwafina, an Angolan firm, should internationalize to the European food market. The proposed methodology is used for identifying potential foreign markets and to identify the entry mode that best fits the firm’s strategy. Screening, identification, and selection characterize the three stages in the evaluation of potential foreign markets and the identification of possible entry modes are based on the proposed theoretical framework

    Design of MECSE Nanosatellite Mechanical Subsystem

    Get PDF
    Magnetohydrodynamics/Electrohydrodynamics CubeSat Experiment (MECSE) is the first Cube- Sat being developed at the University of Beira Interior (UBI) and it is an under development Nanosatellite resulting from the collaboration between C-MAST (Center for Mechanical and Aerospace Science and Technologies) and CEiiA (Centre of Engineering and Product Development). MECSE’s mission is to create a benchmark for the future validation of the theory that an Electromagnetic field can re-shape the layer of plasma surrounding a spacecraft, and therefore allow communications during the so-called atmospheric re-entry Radio Frequency (RF) blackout phase. When it comes to scientific space research there is a need to create a bridge between the scientific goals and the engineering feasibility. In order for the mission to take shape, the development of the product CubeSat shall meet scientific requirements as well as production limitations and space regulations. This master dissertation aims to preliminarily develop MECSE’s Mechanical Subsystem. In this work, a Mechanical Subsystem configuration that ensures the structural reliability during launch, as well as on orbit was developed. The approach adopted for the design of MECSE’s Mechanical System was to, first, define the different project requirements, and then, COTS hardware components were selected based on similar previous missions and their requirements were specified. The project also presents Design Requirements that were specified based on the CubeSat Design Specifications, and the launch platform P-POD. Finally, the materials for the primary structure of the CubeSat had to be selected. A trade-off was performed comparing several material properties (e.g. thermal conductivity, electrical conductivity, workability and others) and the aluminum alloy 7075 T6 was chosen. The spacecraft must sustain a set of mechanical loads without permanent deformation, with a certain margin of safety to prevent the uncertainties in the loading values during launch. A finite element analysis validated the capacity of MECSE to sustain the linear static loads and static temperature during launch and on-orbit.The components were evaluated and, with exception of the Side Frames, the primary structural components should have their thickness reduced, since they presented high margins of safety to stress and strain. The thermal impact study showed that the subsystems will have their envelope of operations conditioned by the angle between the orbit plane and the solar vector. In order to increase the envelop of operations it was recommended the use of aerogel.Magnetohydrodynamics/Electrohydrodynamics CubeSat Experiment (MECSE) é o primeiro Cube- Sat a ser desenvolvido na Universidade da Beira Interior (UBI), resultando da colaboração do C-MAST (Centro de Ciências e Tecnologia Mecânica e Aeroespacial) e o CEiiA (Centro de Engenharia e Desenvolvimento de Produto). A missão do MECSE é criar uma plataforma para a futura validação da teoria que afirma que um campo electromagnético permite diminuir a espessura da camada de plasma e, como tal, permitir comunicações durante a reentrada atmosférica, evitando a chamada fase de blackout. De modo a dar forma à missão, foi necessário o desenvolvimento do produto CubeSat que respeite os requisitos ciêntificos bem como as limitações de produção e regulação espacial, promovendo assim a viabilidade técnica. Esta dissertação de mestrado tem como objectivo o desenvolvimento preliminar do Subsistema Mecânico do MECSE, cuja configuração assegura a fiabilidade estrutural durante o lançamento e em órbita. A abordagem adotada para o design do Subsistema Mecânico do MECSE foi a de primeiro definir os diferentes requisitos de projeto. Depois da definição dos subsistemas necessários, os componentes e respectivos requisitos de hardware foram escolhidos com base em missões semelhantes. O projeto também apresenta requisitos de design que foram estabelecidos tendo por base as especificações de design de Cubesats e as especificações da plataforma de lançamento P-POD. Depois da definição de requisitos, o material para a estrutura primária foi escolhido. Um estudo de trade-off foi realizado em que se comparou várias propriedades dos materiais (p.ex condutividade térmica, condutividade elétrica, maleabilidade, entre outros) e a liga de alumínium 7075 T6 foi a escolhida para a estrutura primária do MECSE. A aeronave deve resistir a um conjunto de cargas mecânicas sem deformar permanentemente com uma determinada margem de segurança devido às incertezas do valor associado às cargas durante o lançamento. Análises em elementos finitos validaram a capacidade do MECSE em resistir às cargas estáticas lineares e às temperaturas estáticas durante o lançamento e em órbita. Os componentes foram avaliados e foi concluído que todos os componentes com exceção das Side Frames deveriam ter a sua espessura reduzida, pois apresentavam uma margem de segurança alta para tensão e deformação. Um estudo de impacto térmico foi realizado e foi possível concluir que os subsistemas terão o seu envelope de operação condicionado pelo ângulo entre o plano de órbita e o vetor solar. De forma a aumentar o envelope de operações, é recomendada a aplicação de aerogel

    Stratification and peer effects: an analysis of Lisbon public schools

    Get PDF
    Educational stratification has been a difficult subject to deal with having yet no study shown a quantitative measure of it. Using the idea of distribution comparison a measure based on parents’ education is built for the primary schools in Lisbon. Upon the confirmation that Lisbon is stratified, I use the measure of peer effects based on stratification and determine its impact on test scores, concluding that the existence of stratification improves scores of students in schools with more educated parents and decreases scores of students in schools with less educated parents. Moreover, using fixed effects I derive the conclusion that the measure of peers’ characteristics helps explain most of differences among schools.NSBE - UN

    Equity crowdfunding : an empirical analysis of funding momentum

    Get PDF
    presente tese investiga se as decisões dos investidores têm influência em investidores subsequentes, tomando isto como momentum (embalo) de financiamento. Esta tese apresenta uma análise do comportamento de investidores num contexto de Equity Crowdfunding, utilizando uma amostra de todos os investimentos realizados em 134 campanhas publicadas na plataforma Invesdor, entre 2012 e 2017. Os resultados obtidos indicam que, num ambiente onde o nível de assimetria de informação é substancial, os investidores incorporam as ações tomadas pelos outros nos seus próprios processos de tomada de decisão. De facto, esta tese apresenta evidências de que, ao longo de uma campanha, não só é possível que a dinâmica de investimento ganhe momentum, como o momentum ganho até determinado dia influencia positivamente os investimentos subsequentes. Adicionalmente, esta tese apresenta uma análise empírica das dinâmicas de investimento em Equity Crowdfunding considerando a diluição de ações que ocorre após uma campanha entrar em overfunding como determinante de decisões. Apesar de os investimentos feitos serem de pequena ordem, os resultados apontam no sentido de os investidores tomarem em atenção a diluição de ações associada a uma campanha nos seus processos de tomada de decisão. Evidencia-se um efeito negativo provocado no momentum de investimento, que é ainda maior quando apenas são consideradas campanhas bem-sucedidas. A autora discute como é que os resultados contribuem para a literatura e apresenta sugestões para investigação futura.The present thesis investigates whether investors’ decisions have an influence on subsequent investors, ascertaining this as funding momentum. It presents an analysis of the behaviour of investors in an Equity Crowdfunding setting, using a sample of all the investments made on 134 campaigns posted on the platform Invesdor, from 2012 to 2017. The results seem to indicate that, in an environment where the level of information asymmetries is substantial, investors look at the actions of others in their own decision-making. In fact, this thesis presents evidence that throughout the duration of a campaign not only it is possible for the funding dynamic to gain momentum, but also the momentum gained until a given day in a campaign positively influences subsequent investments. In addition, this thesis presents an empirical analysis of funding dynamics in Equity Crowdfunding taking into account the share dilution that occurs after a campaign enters in overfunding as a determinant of decisions. The results seem to indicate that, although the investments are of relatively small order, investors take into account the share dilution of a campaign in their decision making. The evidence suggests a negative effect provoked on the funding momentum, which is even higher when only considering successful campaigns. One discusses how the results obtained contribute to literature and presents suggestions for future research

    Umbilical cord clamping: a practice guide

    Get PDF
    O presente documento, sob a forma de relatório de estágio de natureza profissional, apresenta um olhar retrospetivo sobre o processo de aquisição e desenvolvimento de competências relativas ao exercício profissional do Enfermeiro Especialista em Enfermagem de Saúde Materna Obstétrica e Ginecológica, ao longo do estágio, tendo como referência e objetivo, o cumprimento do Regulamento de Competências do Enfermeiro Especialista em Enfermagem de Saúde Materna, Obstétrica e Ginecológica, descrito e aprovado pela Ordem dos Enfermeiros juntamente com a Mesa do Colégio da Especialidade de Saúde Materna e Obstétrica. Este estágio incluiu a intervenção em três diferentes áreas de atuação, nomeadamente, Gravidez, Trabalho de Parto e Parto e Autocuidado Pós-Parto e Parentalidade. Cumulativamente, nestes 3 momentos foram desenvolvidas intervenções de enfermagem, constituídas como ponto de partida para uma síntese crítico-reflexiva dos cuidados especializados prestados, suportando-as pela prática baseada na evidência. Estas intervenções fizeram-se acompanhar por todo o processo de enfermagem, presente sob a forma de focos, diagnósticos, objetivos, e atividades que dão resposta a estas mesmas intervenções, concretizando, de tal modo, todos os cuidados prestados, tendo por base o conhecimento em enfermagem. No decorrer da prática referente à área de atuação de trabalho de parto e parto, devido à contraditória evidência sobre o timing adequado e o procedimento a realizar, surgiu uma problemática no que diz respeito à clampagem do cordão umbilical. Assim, e como perante o parto eutócico, a clampagem do cordão umbilical é da responsabilidade do Enfermeiro Especialista em Enfermagem de Saúde Materna Obstétrica e Ginecológica, foi efetuada uma revisão da literatura sobre a temática, com o intuito e a necessidade de fundamentar a prática e criar a sistematização dos cuidados. Deste modo, da literatura surge a evidência que este procedimento deverá ser realizado com ponderação nos antecedentes materno-fetais, de forma a clarificar os reais efeitos e potenciais riscos, como a presença de mães do tipo Rhesus negativo, diagnóstico de doenças infeciosas, entre outros. Das conclusões obtidas, foi possível constatar que a realização deste procedimento não é recomendada, salvo exceções, após um período pós-nascimento superior a 3 minutos, com risco de hiperbilirrubinemia e necessidade de tratamento, tal como nunca inferior a 1 minuto, evitando desta forma a anemia neonatal. De modo geral, estas são as pedras conclusivas extraídas. Tendo em conta os riscos, existem diversas variáveis que foram consideradas, como o risco prévio de anemia materna ou de deficiência de ferro, o risco de hemólise por incompatibilidade ABO ou até por lesões do parto, como o cefalohematoma, e características do traçado de CTG, entre outros. Variáveis essas que necessitam de ser previamente estudadas, atendendo à individualidade materno-infantil, recorrendo ainda ao pensamento crítico-reflexivo para aferir qual o melhor momento da clampagem e corte do cordão umbilical daquela exata díade. Ter conhecimento de quais as implicações futuras de uma clampagem precoce ou tardia para o recém-nascido é, certamente, uma diretriz guia para uma melhor adequação das intervenções do enfermeiro especialista, no que diz respeito a esta prática, incluída no 3º Período do TP

    The Lean Startup approach in the implementation of a children location device

    Get PDF
    Mestrado em Gestão/MBANesta dissertação de mestrado, a metodologia Lean Startup é usada para desenvolver uma solução comercial de um dispositivo vestível capaz de rastrear crianças.In this master thesis, The Lean Startup methodology is used to develop a business solution of a wearable device that is able to track children.info:eu-repo/semantics/publishedVersio

    Systematic review

    Get PDF
    Publisher Copyright: © Salome Azevedo, Teresa Cipriano Rodrigues, Ana Rita Londral. Originally published in JMIR mHealth and uHealth (https://mhealth.jmir.org), 19.08.2021. This is an open-access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work, first published in JMIR mHealth and uHealth, is properly cited. The complete bibliographic information, a link to the original publication on https://mhealth.jmir.org/, as well as this copyright and license information must be included.Background: The COVID-19 pandemic catalyzed the adoption of home telemonitoring to cope with social distancing challenges. Recent research on home telemonitoring demonstrated benefits concerning the capacity, patient empowerment, and treatment commitment of health care systems. Moreover, for some diseases, it revealed significant improvement in clinical outcomes. Nevertheless, when policy makers and practitioners decide whether to scale-up a technology-based health intervention from a research study to mainstream care delivery, it is essential to assess other relevant domains, such as its feasibility to be expanded under real-world conditions. Therefore, scalability assessment is critical, and it encompasses multiple domains to ensure population-wide access to the benefits of the growing technological potential for home telemonitoring services in health care. Objective: This systematic review aims to identify the domains and methods used in peer-reviewed research studies that assess the scalability of home telemonitoring-based interventions under real-world conditions. Methods: The authors followed the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) guidelines and used multiple databases (PubMed, Scopus, Web of Science, and EconLit). An integrative synthesis of the eligible studies was conducted to better explore each intervention and summarize relevant information concerning the target audience, intervention duration and setting, and type of technology. Each study design was classified based on the strength of its evidence. Lastly, the authors conducted narrative and thematic analyses to identify the domains, and qualitative and quantitative methods used to support scalability assessment. Results: This review evaluated 13 articles focusing on the potential of scaling up a home telemonitoring intervention. Most of the studies considered the following domains relevant for scalability assessment: problem (13), intervention (12), effectiveness (13), and costs and benefits (10). Although cost-effectiveness was the most common evaluation method, the authors identified seven additional cost analysis methods to evaluate the costs. Other domains were less considered, such as the sociopolitical context (2), workforce (4), and technological infrastructure (3). Researchers used different methodological approaches to assess the effectiveness, costs and benefits, fidelity, and acceptability. Conclusions: This systematic review suggests that when assessing scalability, researchers select the domains specifically related to the intervention while ignoring others related to the contextual, technological, and environmental factors, which are also relevant. Additionally, studies report using different methods to evaluate the same domain, which makes comparison difficult. Future work should address research on the minimum required domains to assess the scalability of remote telemonitoring services and suggest methods that allow comparison among studies to provide better support to decision makers during large-scale implementation.publishersversionpublishe
    • …
    corecore