82 research outputs found

    Apical root resorption of maxillary first molars related to headgear use as detected by cone beam computed tomography

    Get PDF
    Extraoral traction (EOT) by occipital headgear is a widely used anchorage and orthopedic approach for the control of maxillary growth. The aims of this study were: 1) to test the hypothesis that headgear use may increase the risk of apical root resorption, using cone beam computed tomography (CBCT) to detect root resorptions of maxillary first molars, and 2) to assess which roots are more prone to resorption and to which extent. A total of 112 maxillary first molars from 56 patients at 52 to 288 months after orthodontic treatment were evaluated to detect apical root resorption on CBCT images. Patients were divided into two groups: Group 1, patients who used EOT for up to six months; Group 2, patients who did not use EOT. The Levander and Malmgren scoring system was used to classify the root apices of maxillary first molars. Significance was set at 5%. Kappa statistics was used to assess agreement; scores were evaluated twice, according to the study methods. There were no differences in the frequency and severity of apical root resorption of maxillary first permanent molars in the two groups as detected by CBCT. The use of EOT did not show association with frequency and severity of ARR considering a long time of follow up.

    A retrospective study of Traumatic Dental Injuries in a Brazilian dental urgency service

    Get PDF
    Epidemiologic aspects of traumatic dental injuries (TDI) were evaluated in the permanent dentition in a sample of 847 patients treated at the Dental Urgency Service of the Dental School of the Federal University of Goiás, Brazil, between May 2000 and May 2008. The statistical treatment analyzed data from frequency distribution and chi-square test. The level of significance was set at 5% for all analyses. The results showed a higher incident among males (610; 72.01%) with mean age of 6-10 year-old. Uncomplicated crown fracture (without pulp exposure) (502; 26.95%), avulsion (341; 18.30%) and complicated crown fracture (with pulp exposure) (330; 17.71%) were the most prevalent TDI. The prevalence of trauma throughout the years showed proportionality, being observed a larger number of cases between July and September (249; 29.39%). The most affected teeth were the maxillary central incisors (65.65%), followed by the maxillary left lateral incisors (19.67%). In 311 participants (18.25%), only one tooth was involved, while in most patients (536; 81.75%), TDI occurred in more than one tooth. Significant proportion (82.27%) of traumatized teeth presented completely formed root apex. The main etiologic factors involved in TDI were falls (51.71%), traffic accidents (22.90%) and violence (5.67%). Based on the obtained data, it may be concluded that accurate policies of TDI prevention must be established, capable of stimulating the exposure of appropriate protocols for management of these lesions. The prevalence of TDI in Goiânia subpopulation is compared to the prevalence reported in epidemiological studies in others populations.Nexte estudo, avaliou-se os aspectos epidemiológicos das injúrias traumáticas na dentição permanente em uma amostra de 847 pacientes atendidos pelo Serviço de Urgência da Faculdade de Odontologia da Universidade Federal de Goiás, entre os anos de 2000 e 2008. O tratamento estatístico analisou os dados frente à distribuição de freqüência e qui-quadrado. O nível de significância foi de p<0,05. Os resultados mostraram uma maior ocorrência entre os indivíduos do gênero masculino (72,01%), na faixa etária 6-10 anos. A fratura coronária sem exposição do tecido pulpar (502; 26,95%), avulsão (341; 18,30%) e fratura coronária com exposição pulpar (330; 17,71%) constituíram nas injúrias traumáticas mais prevalentes. A prevalência das injúrias traumáticas ao longo dos meses do ano mostrou-se proporcional, sendo observado um maior número de casos entre os meses de julho a setembro (249; 29,39%). afetado foi o incisivo central superior (65,65%), seguido pelo incisivo lateral superior esquerdo (19,67%). Em 311 participantes (18,25%) apenas um dente estava envolvido, enquanto que a maioria dos pacientes (536; 81,75%), injúrias dentárias ocorreram em mais de um dente. Significativa proporção (82,27%) dos dentes traumatizados apresentava os ápices radiculares completamente formados. Os principais fatores etiológicos envolvidos nos traumatismos dentários foram as quedas (51,71%), acidentes automobilísticos (22,90%), e violência (5,67%). Adequadas políticas de prevenção de traumatismos dentários devem ser institucionalizadas, capaz de divulgar protocolos apropriados para o manejo destas lesões. A prevalência de traumatismos dentários em uma subpopulação de Goiânia é comparável a prevalência reportada em estudos epidemiológicos de outras populações.(CNPq) Nacional Council for Scientific and Technological Developmen

    Working Length Determination Using Cone-Beam Computed Tomography, Periapical Radiography and Electronic Apex Locator in Teeth with Apical Periodontitis: A Clinical Study

    Get PDF
    Introduction: The purpose of this clinical study was to compare the accuracy of working length (WL) determination using cone-beam computed tomography (CBCT), conventional periapical radiographies and electronic apex locator. Methods and Materials: This study was conducted during root canal treatment of 19 patients with a total of 30 single-rooted teeth diagnosed with apical periodontitis. After taking the initial parallel periapical radiographies, the initial file was advanced into the canal until the WL was detected by the apex locator. Subsequently, the WL was measured and WL radiographies were taken with the file set in the canal. Afterwards, CBCT images were acquired. These three measurements were tabulated and compared and the data were analyzed using the Friedman test. The level of significance was set at 0.05. Results: The mean values for WL determination by electronic apex locator, periapical radiograph and CBCT images were 22.25, 22.43 and 22.65, respectively which was not statistically significant (P&gt;0.05). Conclusion: Working length determination using CBCT images was precise when compared to radiographic method and electronic apex locator.Keywords: Apical Foramen; Cone-Beam Computed Tomography; Dental Radiography; Electronic Apex Locator; Tooth Ape

    Detection of selected bacterial species in intraoral sites of patients with chronic periodontitis using multiplex polymerase chain reaction

    Get PDF
    OBJECTIVE: The aim of this study was to detect the prevalence of selected bacterial species in intraoral sites of patients with chronic periodontitis (CP) using multiplex polymerase chain reaction (PCR). METHODOLOGY: Samples were collected from the tongue dorsum, buccal mucosa, supragingival and subgingival plaque and saliva of 30 patients with untreated CP. Multiplex PCR was used to determine prevalence rates, which were then compared using a chi-square test. Significance level was set at

    Cone Beam Computed Tomography Assessment of the Volume of Dental Tissue Removed During Endodontic Access

    Get PDF
    Introduction: The purpose of this study was to determine the volume of dental tissue removed during endodontic access preparation with cone-beam computed tomography (CBCT) comparing two different software. Methods and Materials: CBCT images of 20 teeth were obtained before and after endodontic access performed with spherical and conical diamond burs. The images were taken with i-CAT Precise system with 0.25 mm voxel size. Digital Imaging and Communications in Medicine (DICOM) images were loaded on two different software programs (Materialise® and InVersalius®), and a 3D reconstruction of the CBCT images was performed on both programs. The baseline volume (BV), and the final volume (FV) were obtained, and the lost tissue volume (LV) was calculated using the formula: LV=BV-FV. The t-test was used to compare initial and final volumes and also to compare the two programs, using a significance level of 5%. Results: The volumetric data calculated for the MaterialiseÒ and the InVesaliusÒ programs were, respectively: BV-mean of 441.79±85.08 mm3 and 442.01±84.83 mm3; FV-mean of 426.75±83.88 mm3 and 426.94±83.75 mm3; LV-mean of 15.04±4.32 mm3 and 15.07±4.16 mm3. No statistically significant difference was found in the volumes calculated by either program for initial, final, or removed tissue (P&gt;0.05). However, there was a significant difference between the BV and LV calculated on the same program (P&lt;0.05). Conclusion: Our in vitro study showed that CBCT was able to determine the volume of dental tissue removed in the endodontic access preparation of extracted human teeth, regardless of the software program used

    Three-dimensional images contribute to the diagnosis of mucous retention cyst in maxillary sinus

    Get PDF
    Objective: To evaluate the detection of mucous retention cyst of maxillary sinus (MRCMS) using panoramic radiography and cone beam computed tomography (CBCT). Study Design: A digital database with 6,000 panoramic radiographs was reviewed for MRCMS. Suggestive images of MRCMS were detected on 185 radiographs, and patients were located and invited to return for follow-up. Thirty patients returned, and control panoramic radiographs were obtained 6 to 46 months after the initial radiograph. When MRCMS was found on control radiographs, CBCT scans were obtained. Cysts were measured and compared on radiographs and scans. The Wilcoxon, Spearman and Kolmorogov-Smirnov tests were used for statistical analysis. The level of significance was set at 5%. Results: There were statistically significant differences between the two methods (p<0.05): 23 MRCMS detected on panoramic radiographs were confirmed by CBCT, but 5 MRCMS detected on CBCT images had not been identified by panoramic radiography. Eight MRCMS detected on control radiographs were not confirmed by CBCT. MRCMS size differences from initial to control panoramic radiographs and CBCT scans were not statistically significant (p= 0.617 and p= 0.626). The correlation between time and MRCMS size differences was not significant (r = -0.16, p = 0.381). Conclusion: CBCT scanning detect MRCMS more accurately than panoramic radiography

    Prevalence of Abutment Teeth for Conventional Fixed Prostheses in a Brazilian Subpopulation

    Get PDF
    The purpose of this cross-sectional study was to evaluate the prevalence of abutment teeth for conventional fixed prostheses in a Brazilian subpopulation. Panoramic radiographs for a total of 1,401 patients taken from August 2002 to September 2007 were randomly selected from the database of the Radiological Center of Orofacial Images of Cuiabá (Cuiabá, Brazil). A total of 1,401 radiographs were examined to determine the frequency of abutment teeth for conventional fixed prostheses. Data concerning age, sex, and dental group were recorded. Frequency distribution and the chi-square test were used for statistical analysis. The level of significance was set at α = 5%. Of the 29,467 teeth included in the evaluation, 4,967 (16.8%) were abutments for conventional fixed prostheses. A high prevalence of abutment teeth for conventional fixed prostheses was observed in individuals aged between 46 and 60 years (49.9%). Maxillary canines and second premolars were the teeth most often involved in rehabilitation (10.5% and 10.3%). Missing teeth were identified in 24.8% of the sample. The prevalence of abutment teeth for conventional fixed prostheses was 16.8%, and the teeth most frequently used were maxillary canines and maxillary second premolars

    Cone-Beam Computed Tomography as a Diagnostic Method for Determination of Gingival Thickness and Distance between Gingival Margin and Bone Crest

    Get PDF
    The objective of the present study was to assess cone-beam computed tomography (CBCT) as a diagnostic method for determination of gingival thickness (GT) and distance between gingival margin and vestibular (GMBC-V) and interproximal bone crests (GMBC-I). GT and GMBC-V were measured in 348 teeth and GMBC-I was measured in 377 tooth regions of 29 patients with gummy smile. GT was assessed using transgingival probing (TP), ultrasound (US), and CBCT, whereas GMBC-V and GMBC-I were assessed by transsurgical clinical evaluation (TCE) and CBCT. Statistical analyses used independent t-test, Pearson’s correlation coefficient, and simple linear regression. Difference was observed for GT: between TP, CBCT, and US considering all teeth; between TP and CBCT and between TP and US in incisors and canines; between TP and US in premolars and first molars. TP presented the highest means for GT. Positive correlation and linear regression were observed between TP and CBCT, TP and US, and CBCT and US. Difference was observed for GMBC-V and GMBC-I using TCE and CBCT, considering all teeth. Correlation and linear regression results were significant for GMBC-V and GMBC-I in incisors, canines, and premolars. CBCT is an effective diagnostic method to visualize and measure GT, GMBC-V, and GMBC-I

    Effect of dental bleaching on pulp oxygen saturation in maxillary central incisors - a randomized clinical trial

    Get PDF
    Objective: To assess pulp oxygen saturation levels (SaO2) in maxillary central incisors after dental bleaching. Materials and Methods: 80 participants (160 teeth) were randomly allocated to four groups: G1 In-office bleaching with two applications of 35% hydrogen peroxide (HP) (20 minutes), followed by at-home bleaching with 10% carbamide peroxide (CP) (2 hours/day for 16 days); G2 - Same protocol as G1, plus desensitizing toothpaste; G3 - Inoffice bleaching with 35% HP and one application of placebo gel (20 minutes), followed by at-home bleaching with 10% CP (2 hours/day for 16 days); and G4 - Same protocol as G3, plus desensitizing toothpaste. Pulp SaO2 levels were measured before (T0) and immediately after (T1) in-office bleaching; on the 5th (T2), 8th (T3), 12th (T4), and 16th days of at-home bleaching (T5); and on the 7th (T6) and 30th (T7) days. Mean (SD) pulp SaO2 levels were compared within groups by generalized estimating equations (GEE) and Student’s t-test (P&lt;0.05). Results: Mean pulp SaO2 at T0 was 84.29% in G1, 84.38% in G2, 84.79% in G3, and 85.83% in G4. At T1, these values decreased to 81.96%, 82.06%, 82.19%, and 81.15% in G1, G2, G3, and G4 respectively, with significant difference in G4 (P&lt;0.05). During home bleaching, pulp SaO2 levels varied in all groups, with 86.55%, 86.60%, 85.71%, and 87.15% means at T7 for G1, G2, G3, and G4, respectively; G2 presented significant difference (P&lt;0.05). Conclusions: Pulp SaO2 level in maxillary central incisors was similar at baseline, reducing immediately after in-office bleaching, regardless of using desensitizing toothpaste and increasing at 30 days after dental bleaching

    Alveolar ridge preservation for further rehabilitation with implants: case report

    Get PDF
    SUB-HEADING: Alveolar ridge preservation is done when immediate or early implant placement is not indicated. PURPOSE: Report a case of extraction of the maxillary premolar, followed by alveolar preservation and later rehabilitation with implants. CASE REPORT: A 52-year-old male patient sought care for the rehabilitation of upper left second premolar tooth, which had a longitudinal fracture. The radiographic examination revealed the proximity of the root apex to the floor of the maxillary sinus and alveolar preservation was chosen. CONCLUSION: The clinical decision-making process for preservation starts before extraction.&nbsp; INTRODUÇÃO: Preservação alveolar é realizada quando a instalação de implante imediata ou precoce não é indicada. OBJETIVO: Relatar um caso de extração de um pré-molar superior, seguido pela preservação alveolar e posterior reabilitação com implante. RELATO DE CASO: Paciente do sexo masculino, 52 anos,&nbsp; necessitando da reabilitação do segundo pré-molar superior esquerdo, que possuía uma fratura longitudinal. O exame radiográfico, revelou proximidade do ápice radicular com o assoalho do seio maxilar e a preservação alveolar foi o tratamento de escolha. CONCLUSÕES: O processo de decisão clinica para a preservação alveolar deve iniciar antes da extração
    • …
    corecore