14 research outputs found

    Flow in a Branching Open Channel: A Review

    Get PDF
    Branching channel flow refers to any side water withdrawals from rivers or main channels. Branching channels have wide application in many practical projects, such as irrigation and drainage network systems, water and waste water treatment plants, and many water resources projects. In the last decades, extensive theoretical and experimental investigations of the branching open channels have been carried out to understand the characteristics of this branching flow, varying from case studies to theoretical and experimental investigations. The objectives of this paper are to review and summarise the relevant literatures regarding branching channel flow. These literatures were reviewed based on flow characteristics, physical characteristics, and modeling of the branching flow. Investigations of the flow into branching channel show that the branching discharge depends on many interlinked parameters. It increases with the decreasing of the main channel flow velocity and Froude number at the upstream of the branch channel junction. Also it increases with the increasing of the branch channel bed slope. In subcritical flow, water depth in the branch channel is always lower than the main channel water depth. The flow diversion to the branch channel leads to an increase of water depth at the downstream of the main channel. From the review, it is important to highlight that most of the study concentrated on flow characteristics in a right angle branch channel with a rigid boundary. Investigations on different branching angles with movable bed have still to be explored

    Influence of diversion angle on water and sediment flow into diversion channel

    Get PDF
    Accumulation of the sediment in the stream of the diversion channels adversely affects its operational systems. Diversion channels are often constructed perpendicular to the main river. In this study, the water flow and sediment transport in the diversion channel with different angles were investigated in an attempt to maximize water discharge and minimize sediment discharge. A physical model with movable bed was used to simulate water and sediment flow with five diversion angles (θ) between (30°–90°). Moreover, three bed width ratios (Br) (the relation between diversion to main channel bed width) between 30% and 50% and five total discharges between (7.25 L/s to 12.25 L/s) were considered for each case of (θ). The results showed, up to 10%, increasing in proportion discharge ratios for 30 and 45 diversion angles compared with 90° diversion angle. The results also showed that the lowest diversion sediment concentration was provided by the (θ) of 30°. Across all scenarios, the average proportion concentration reduction was 64%, compared with 90° diversion angle. Closer observation of the diversion system mechanism confirmed that decreased (θ) result in decreased sediment concentrations in the diversion channels. In conclusion, the diversion channel water and sediment discharge could be effectively managed by changing the (θ) to 30° or 45° instead of 90°

    Flow in a branching open channel: a review

    Get PDF
    Branching channel flow refers to any side water withdrawals from rivers or main channels. Branching channels have wide application in many practical projects, such as irrigation and drainage network systems, water and waste water treatment plants, and many water resources projects. In the last decades, extensive theoretical and experimental investigations of the branching open channels have been carried out to understand the characteristics of this branching flow, varying from case studies to theoretical and experimental investigations. The objectives of this paper are to review and summarise the relevant literatures regarding branching channel flow. These literatures were reviewed based on flow characteristics, physical characteristics, and modeling of the branching flow. Investigations of the flow into branching channel show that the branching discharge depends on many interlinked parameters. It increases with the decreasing of the main channel flow velocity and Froude number at the upstream of the branch channel junction. Also it increases with the increasing of the branch channel bed slope. In subcritical flow, water depth in the branch channel is always lower than the main channel water depth. The flow diversion to the branch channel leads to an increase of water depth at the downstream of the main channel. From the review, it is important to highlight that most of the study concentrated on flow characteristics in a right angle branch channel with a rigid boundary. Investigations on different branching angles with movable bed have still to be explored

    Global incidence, prevalence, years lived with disability (YLDs), disability-adjusted life-years (DALYs), and healthy life expectancy (HALE) for 371 diseases and injuries in 204 countries and territories and 811 subnational locations, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

    Get PDF
    Background: Detailed, comprehensive, and timely reporting on population health by underlying causes of disability and premature death is crucial to understanding and responding to complex patterns of disease and injury burden over time and across age groups, sexes, and locations. The availability of disease burden estimates can promote evidence-based interventions that enable public health researchers, policy makers, and other professionals to implement strategies that can mitigate diseases. It can also facilitate more rigorous monitoring of progress towards national and international health targets, such as the Sustainable Development Goals. For three decades, the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) has filled that need. A global network of collaborators contributed to the production of GBD 2021 by providing, reviewing, and analysing all available data. GBD estimates are updated routinely with additional data and refined analytical methods. GBD 2021 presents, for the first time, estimates of health loss due to the COVID-19 pandemic. Methods: The GBD 2021 disease and injury burden analysis estimated years lived with disability (YLDs), years of life lost (YLLs), disability-adjusted life-years (DALYs), and healthy life expectancy (HALE) for 371 diseases and injuries using 100 983 data sources. Data were extracted from vital registration systems, verbal autopsies, censuses, household surveys, disease-specific registries, health service contact data, and other sources. YLDs were calculated by multiplying cause-age-sex-location-year-specific prevalence of sequelae by their respective disability weights, for each disease and injury. YLLs were calculated by multiplying cause-age-sex-location-year-specific deaths by the standard life expectancy at the age that death occurred. DALYs were calculated by summing YLDs and YLLs. HALE estimates were produced using YLDs per capita and age-specific mortality rates by location, age, sex, year, and cause. 95% uncertainty intervals (UIs) were generated for all final estimates as the 2·5th and 97·5th percentiles values of 500 draws. Uncertainty was propagated at each step of the estimation process. Counts and age-standardised rates were calculated globally, for seven super-regions, 21 regions, 204 countries and territories (including 21 countries with subnational locations), and 811 subnational locations, from 1990 to 2021. Here we report data for 2010 to 2021 to highlight trends in disease burden over the past decade and through the first 2 years of the COVID-19 pandemic. Findings: Global DALYs increased from 2·63 billion (95% UI 2·44–2·85) in 2010 to 2·88 billion (2·64–3·15) in 2021 for all causes combined. Much of this increase in the number of DALYs was due to population growth and ageing, as indicated by a decrease in global age-standardised all-cause DALY rates of 14·2% (95% UI 10·7–17·3) between 2010 and 2019. Notably, however, this decrease in rates reversed during the first 2 years of the COVID-19 pandemic, with increases in global age-standardised all-cause DALY rates since 2019 of 4·1% (1·8–6·3) in 2020 and 7·2% (4·7–10·0) in 2021. In 2021, COVID-19 was the leading cause of DALYs globally (212·0 million [198·0–234·5] DALYs), followed by ischaemic heart disease (188·3 million [176·7–198·3]), neonatal disorders (186·3 million [162·3–214·9]), and stroke (160·4 million [148·0–171·7]). However, notable health gains were seen among other leading communicable, maternal, neonatal, and nutritional (CMNN) diseases. Globally between 2010 and 2021, the age-standardised DALY rates for HIV/AIDS decreased by 47·8% (43·3–51·7) and for diarrhoeal diseases decreased by 47·0% (39·9–52·9). Non-communicable diseases contributed 1·73 billion (95% UI 1·54–1·94) DALYs in 2021, with a decrease in age-standardised DALY rates since 2010 of 6·4% (95% UI 3·5–9·5). Between 2010 and 2021, among the 25 leading Level 3 causes, age-standardised DALY rates increased most substantially for anxiety disorders (16·7% [14·0–19·8]), depressive disorders (16·4% [11·9–21·3]), and diabetes (14·0% [10·0–17·4]). Age-standardised DALY rates due to injuries decreased globally by 24·0% (20·7–27·2) between 2010 and 2021, although improvements were not uniform across locations, ages, and sexes. Globally, HALE at birth improved slightly, from 61·3 years (58·6–63·6) in 2010 to 62·2 years (59·4–64·7) in 2021. However, despite this overall increase, HALE decreased by 2·2% (1·6–2·9) between 2019 and 2021. Interpretation: Putting the COVID-19 pandemic in the context of a mutually exclusive and collectively exhaustive list of causes of health loss is crucial to understanding its impact and ensuring that health funding and policy address needs at both local and global levels through cost-effective and evidence-based interventions. A global epidemiological transition remains underway. Our findings suggest that prioritising non-communicable disease prevention and treatment policies, as well as strengthening health systems, continues to be crucially important. The progress on reducing the burden of CMNN diseases must not stall; although global trends are improving, the burden of CMNN diseases remains unacceptably high. Evidence-based interventions will help save the lives of young children and mothers and improve the overall health and economic conditions of societies across the world. Governments and multilateral organisations should prioritise pandemic preparedness planning alongside efforts to reduce the burden of diseases and injuries that will strain resources in the coming decades. Funding: Bill & Melinda Gates Foundation

    Global burden and strength of evidence for 88 risk factors in 204 countries and 811 subnational locations, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

    Get PDF
    Background: Understanding the health consequences associated with exposure to risk factors is necessary to inform public health policy and practice. To systematically quantify the contributions of risk factor exposures to specific health outcomes, the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 aims to provide comprehensive estimates of exposure levels, relative health risks, and attributable burden of disease for 88 risk factors in 204 countries and territories and 811 subnational locations, from 1990 to 2021. Methods: The GBD 2021 risk factor analysis used data from 54 561 total distinct sources to produce epidemiological estimates for 88 risk factors and their associated health outcomes for a total of 631 risk–outcome pairs. Pairs were included on the basis of data-driven determination of a risk–outcome association. Age-sex-location-year-specific estimates were generated at global, regional, and national levels. Our approach followed the comparative risk assessment framework predicated on a causal web of hierarchically organised, potentially combinative, modifiable risks. Relative risks (RRs) of a given outcome occurring as a function of risk factor exposure were estimated separately for each risk–outcome pair, and summary exposure values (SEVs), representing risk-weighted exposure prevalence, and theoretical minimum risk exposure levels (TMRELs) were estimated for each risk factor. These estimates were used to calculate the population attributable fraction (PAF; ie, the proportional change in health risk that would occur if exposure to a risk factor were reduced to the TMREL). The product of PAFs and disease burden associated with a given outcome, measured in disability-adjusted life-years (DALYs), yielded measures of attributable burden (ie, the proportion of total disease burden attributable to a particular risk factor or combination of risk factors). Adjustments for mediation were applied to account for relationships involving risk factors that act indirectly on outcomes via intermediate risks. Attributable burden estimates were stratified by Socio-demographic Index (SDI) quintile and presented as counts, age-standardised rates, and rankings. To complement estimates of RR and attributable burden, newly developed burden of proof risk function (BPRF) methods were applied to yield supplementary, conservative interpretations of risk–outcome associations based on the consistency of underlying evidence, accounting for unexplained heterogeneity between input data from different studies. Estimates reported represent the mean value across 500 draws from the estimate's distribution, with 95% uncertainty intervals (UIs) calculated as the 2·5th and 97·5th percentile values across the draws. Findings: Among the specific risk factors analysed for this study, particulate matter air pollution was the leading contributor to the global disease burden in 2021, contributing 8·0% (95% UI 6·7–9·4) of total DALYs, followed by high systolic blood pressure (SBP; 7·8% [6·4–9·2]), smoking (5·7% [4·7–6·8]), low birthweight and short gestation (5·6% [4·8–6·3]), and high fasting plasma glucose (FPG; 5·4% [4·8–6·0]). For younger demographics (ie, those aged 0–4 years and 5–14 years), risks such as low birthweight and short gestation and unsafe water, sanitation, and handwashing (WaSH) were among the leading risk factors, while for older age groups, metabolic risks such as high SBP, high body-mass index (BMI), high FPG, and high LDL cholesterol had a greater impact. From 2000 to 2021, there was an observable shift in global health challenges, marked by a decline in the number of all-age DALYs broadly attributable to behavioural risks (decrease of 20·7% [13·9–27·7]) and environmental and occupational risks (decrease of 22·0% [15·5–28·8]), coupled with a 49·4% (42·3–56·9) increase in DALYs attributable to metabolic risks, all reflecting ageing populations and changing lifestyles on a global scale. Age-standardised global DALY rates attributable to high BMI and high FPG rose considerably (15·7% [9·9–21·7] for high BMI and 7·9% [3·3–12·9] for high FPG) over this period, with exposure to these risks increasing annually at rates of 1·8% (1·6–1·9) for high BMI and 1·3% (1·1–1·5) for high FPG. By contrast, the global risk-attributable burden and exposure to many other risk factors declined, notably for risks such as child growth failure and unsafe water source, with age-standardised attributable DALYs decreasing by 71·5% (64·4–78·8) for child growth failure and 66·3% (60·2–72·0) for unsafe water source. We separated risk factors into three groups according to trajectory over time: those with a decreasing attributable burden, due largely to declining risk exposure (eg, diet high in trans-fat and household air pollution) but also to proportionally smaller child and youth populations (eg, child and maternal malnutrition); those for which the burden increased moderately in spite of declining risk exposure, due largely to population ageing (eg, smoking); and those for which the burden increased considerably due to both increasing risk exposure and population ageing (eg, ambient particulate matter air pollution, high BMI, high FPG, and high SBP). Interpretation: Substantial progress has been made in reducing the global disease burden attributable to a range of risk factors, particularly those related to maternal and child health, WaSH, and household air pollution. Maintaining efforts to minimise the impact of these risk factors, especially in low SDI locations, is necessary to sustain progress. Successes in moderating the smoking-related burden by reducing risk exposure highlight the need to advance policies that reduce exposure to other leading risk factors such as ambient particulate matter air pollution and high SBP. Troubling increases in high FPG, high BMI, and other risk factors related to obesity and metabolic syndrome indicate an urgent need to identify and implement interventions

    Experimental investigation of scour at a channel junctions of different diversion angles and bed width ratios

    Get PDF
    Diversion flows from rivers or main channels affect bed morphology and cause erosion and sedimentation at the diversion channel junction. In a diversion channel flow system, the scour depth and scour length are considered important parameters and should be taken into account during the project construction stage because it affect the stability of main channel banks and crossing structures. In this study, the scour depth produced by diversion flow in a main channel was investigated using a physical sand bed model. The investigations considered five diversion angles (30°, 45°, 60°, 75°, and 90°), three bed width ratios (29%, 38%, and 48%), and five total discharges (7.25, 8.5, 9.75, 11, and 12.25 L/s). Results indicated that the scour depth in the main channel reduced as the diversion angle reduced. Empirical relationship to demonstrate relative scour depth (Kds) for different diversion angles and bed width ratios was proposed. Relative scour depth can be defined as a relative scour depth in case of a diversion angle of θ° to that with 90° for the same flow condition and bed width ratio. Empirical relationships to estimate the scour depth and scour length with the governing hydraulic parameters were also established with a good accuracy. Testing the proposed relationships gave reasonable mean errors of 3.46% and 10.3% in predicting scour depth and scour length, respectively

    Velocity distribution description in a sand bed branching channel with different angles and bed widths

    No full text
    A branching flow is a hydraulic phenomenon presents in many rivers or manmade channels and has many practical hydraulic engineering applications such as in irrigation systems where water is diverted from a river to irrigation canals. A sand bed physical model was used in this study to investigate the velocity distribution at the branching channel junction. Different cases of the branch channel geometry represented by three branch channel angles (30 ̊, 60 ̊, and 90 ̊) and three branch channel width ratios (30%, 40%, and 50%) were examined to characterize the velocity distribution. Experimental work finding displays a low velocity region in the upstream side of the beginning of the branch channel occurred in all cases of the branch channel geometry. Branch channel with 60 ̊ angle recorded the maximum low velocity region length, then 90 ̊ branching angle, and the minimum length took place at 30 ̊ angle. Moreover, 30 ̊ branching angle recorded the lees different of the velocity values between upstream and downstream sides of the branch channel and the less flow impact on the downstream branch channel side wall
    corecore