Introduction for the Special Issue on Beyond the Hypes of Geospatial Big Data: Theories, Methods, Analytics, and Applications

We live in the era of ‘Big Data’. In particular, Geospatial data, whether captured through remote sensors (e.g., satellite imagery) or generated from large-scale simulations (e.g., climate change models) have always been significantly large in size. Over the last decade however, advances in instrumentation and computation has seen the volume, variety, velocity, and veracity of this data increase exponentially. Of the 2.5 quintillion (1018) bytes of data that are generated on a daily basis across the globe, a large portion (arguably as much as 80%) is found to be geo-referenced. Therefore, this special issue is dedicated to the innovative theories, methods, analytics, and applications of geospatial big data

Reliable Positioning and Journey Planning for Intelligent Transport Systems

Safety and reliability of intelligent transport systems applications require positioning accuracy at the sub-meter level with availability and integrity above 99%. At present, no single positioning sensor can meet these requirements in particular in the urban environment. Possible sensors that can be used for this task are first reviewed. Next, a suggested integrated system of low-cost real-time kinematic (RTK) GNSS, inertial measurement units (IMU) and vehicle odometer is discussed. To ensure positioning integrity, a method for fault detection in GNSS observations and computation of the protection levels (PL) that bound the position errors at a pre-set risk probability of the integrated sensors are presented. A case study is performed for demonstration. Moreover, to save energy, reduce pollution, and to improve the economy of the trip, proper journey planning is required. A new approach is introduced using 3D city models to predict the route with the best positioning integrity, availability and precision for route selection among different possible routes. The practical demonstration shows that effectiveness of this method. Finally, the potential of using the next generation SBAS for ITS applications was tested using kinematic tests carried out in various environments characterized by different levels of sky-visibility that may affect observations from GNSS

Multisensor navigation systems: a remedy for GNSS vulnerabilities?

Space-based positioning, navigation, and timing (PNT) technologies, such as the global navigation satellite systems (GNSS) provide position, velocity, and timing information to an unlimited number of users around the world. In recent years, PNT information has become increasingly critical to the security, safety, and prosperity of the World's population, and is now widely recognized as an essential element of the global information infrastructure. Due to its vulnerabilities and line-of-sight requirements, GNSS alone is unable to provide PNT with the required levels of integrity, accuracy, continuity, and reliability. A multisensor navigation approach offers an effective augmentation in GNSS-challenged environments that holds a promise of delivering robust and resilient PNT. Traditionally, sensors such as inertial measurement units (IMUs), barometers, magnetometers, odometers, and digital compasses, have been used. However, recent trends have largely focused on image-based, terrain-based and collaborative navigation to recover the user location. This paper offers a review of the technological advances that have taken place in PNT over the last two decades, and discusses various hybridizations of multisensory systems, building upon the fundamental GNSS/IMU integration. The most important conclusion of this study is that in order to meet the challenging goals of delivering continuous, accurate and robust PNT to the ever-growing numbers of users, the hybridization of a suite of different PNT solutions is required

Probabilistic Map Matching for Robust Inertial Navigation Aiding

Robust aiding of inertial navigation systems in GNSS-denied environments is critical for the removal of accumulated navigation error caused by the drift and bias inherent in inertial sensors. One way to perform such an aiding uses matching of geophysical measurements, such as gravimetry, gravity gradiometry or magnetometry, with a known geo-referenced map. Although simple in concept, this map matching procedure is challenging: the measurements themselves are noisy; their associated spatial location is uncertain; and the measurements may match multiple points within the map (i.e. non-unique solution). In this paper, we propose a probabilistic multiple hypotheses tracker to solve the map matching problem and allow robust inertial navigation aiding. Our approach addresses the problem both locally, via probabilistic data association, and temporally by incorporating the underlying platform kinematic constraints into the tracker. The map matching output is then integrated into the navigation system using an unscented Kalman filter. Additionally, we present a statistical measure of local map information density -- the map feature variability -- and use it to weight the output covariance of the proposed algorithm. The effectiveness and robustness of the proposed algorithm are demonstrated using a navigation scenario involving gravitational map matching.Comment: 12 pages. 13 figure

Collaborative navigation as a solution for PNT applications in GNSS challenged environments: report on field trials of a joint FIG / IAG working group

PNT stands for Positioning, Navigation, and Timing. Space-based PNT refers to the capabilities enabled by GNSS, and enhanced by Ground and Space-based Augmentation Systems (GBAS and SBAS), which provide position, velocity, and timing information to an unlimited number of users around the world, allowing every user to operate in the same reference system and timing standard. Such information has become increasingly critical to the security, safety, prosperity, and overall qualityof-life of many citizens. As a result, space-based PNT is now widely recognized as an essential element of the global information infrastructure. This paper discusses the importance of the availability and continuity of PNT information, whose application, scope and significance have exploded in the past 10–15 years. A paradigm shift in the navigation solution has been observed in recent years. It has been manifested by an evolution from traditional single sensor-based solutions, to multiple sensor-based solutions and ultimately to collaborative navigation and layered sensing, using non-traditional sensors and techniques – so called signals of opportunity. A joint working group under the auspices of the International Federation of Surveyors (FIG) and the International Association of Geodesy (IAG), entitled ‘Ubiquitous Positioning Systems’ investigated the use of Collaborative Positioning (CP) through several field trials over the past four years. In this paper, the concept of CP is discussed in detail and selected results of these experiments are presented. It is demonstrated here, that CP is a viable solution if a ‘network’ or ‘neighbourhood’ of users is to be positioned / navigated together, as it increases the accuracy, integrity, availability, and continuity of the PNT information for all users

Robust Positioning Performance in Indoor Environments

Increasingly, safety and liability critical applications require GNSS-like positioning metrics in environments where GNSS cannot work. Indoor navigation for the vision impaired and other mobility restricted individuals, emergency responders and asset tracking in buildings demand levels of positioning accuracy and integrity that cannot be satisfied by current indoor positioning technologies and techniques. This paper presents the challenges facing positioning technologies for indoor positioning and presents innovative algorithms and approaches that aim to enhance performance in these difficult environments. The overall aim is to achieve GNSS-like performance in terms of autonomous, global, infrastructure free, portable and cost efficient. Preliminary results from a real-world experimental campaign conducted as part of the joint FIG Working Group 5.5 and IAG Sub-commission 4.1 on multi-sensor systems, demonstrate performance improvements based on differential Wi-Fi (DWi-Fi) and cooperative positioning techniques. The techniques, experimental schema and initial results will be fully documented in this paper

Quantum estimation of the number of emitters for multiple fluorophores with the same spectral signature

Fluorescence microscopy is of vital importance for understanding biological function. However most fluorescence experiments are only qualitative inasmuch as the absolute number of fluorescent particles can often not be determined. Additionally, conventional approaches to measuring fluorescence intensity cannot distinguish between two or more fluorophores that are excited and emit in the same spectral window, as only the total intensity in a spectral window can be obtained. Here we show that, by using photon number resolving experiments, we are able to determine the number of emitters and their probability of emission for a number of different species, all with the same measured spectral signature. We illustrate our ideas by showing the determination of the number of emitters per species and the probability of photon collection from that species, for one, two, and three otherwise unresolvable fluorophores. The convolution Binomial model is presented to model the counted photons emitted by multiple species. And then the Expectation-Maximization (EM) algorithm is used to match the measured photon counts to the expected convolution Binomial distribution function. In applying the EM algorithm, to leverage the problem of being trapped in a sub-optimal solution, the moment method is introduced in finding the initial guess of the EM algorithm. Additionally, the associated Cram\'er-Rao lower bound is derived and compared with the simulation results

Experimental Evaluation of a UWB-Based Cooperative Positioning System for Pedestrians in GNSS-Denied Environment

Cooperative positioning (CP) utilises information sharing among multiple nodes to enable positioning in Global Navigation Satellite System (GNSS)-denied environments. This paper reports the performance of a CP system for pedestrians using Ultra-Wide Band (UWB) technology in GNSS-denied environments. This data set was collected as part of a benchmarking measurement campaign carried out at the Ohio State University in October 2017. Pedestrians were equipped with a variety of sensors, including two different UWB systems, on a specially designed helmet serving as a mobile multi-sensor platform for CP. Different users were walking in stop-and-go mode along trajectories with predefined checkpoints and under various challenging environments. In the developed CP network, both Peer-to-Infrastructure (P2I) and Peer-to-Peer (P2P) measurements are used for positioning of the pedestrians. It is realised that the proposed system can achieve decimetre-level accuracies (on average, around 20 cm) in the complete absence of GNSS signals, provided that the measurements from infrastructure nodes are available and the network geometry is good. In the absence of these good conditions, the results show that the average accuracy degrades to meter level. Further, it is experimentally demonstrated that inclusion of P2P cooperative range observations further enhances the positioning accuracy and, in extreme cases when only one infrastructure measurement is available, P2P CP may reduce positioning errors by up to 95%. The complete test setup, the methodology for development, and data collection are discussed in this paper. In the next version of this system, additional observations such as the Wi-Fi, camera, and other signals of opportunity will be included

A Benchmarking Measurement Campaign to Support Ubiquitous Localization in GNSS Denied and Indoor Environments

n/