Drying kinetics and determination of water sorption isotherms of corn

The study was carried out for the purpose of determining the drying kinetics as well as moisture sorption isotherm of hybrid-81 corn. Corn at about 31% moisture content (wb) was dried in a forced convective hot air cabinet dryer at different drying conditions, such as variable air dry bulb temperature (40°C, 50°C and 60°C) and loading density (3.56 kg/m2, 7.12 kg/m2, and 10.68 kg/m2) as well as in shining sun at different layers (3.56 kg/m2, 7.12 kg/m2, and 10.68 kg/m2). The water sorption isotherm of the dried corn was developed using vacuum desiccators, which contained saturated salt solutions in the range of 11-93% RHs. The mono-layer moisture content calculated by the Brunauer–Emmett–Teller (BET) model (6.76 g/100 g solid) was lesser than that calculated by the Guggenheim–Anderson–De Boer (GAB) model (10.53 g/100 g solid). The energy constants were 10.45 and 4.64 as per BET and GAB equation, respectively. Both models gave suitable fits for corn. The activation energy (Ea) for diffusion of water was found to be 11.09 kcal/gm-mole for corn. Furthermore, it was noticed that, with the increase of corn layer, the drying rate decreased in case of both sun and mechanical drying. However, higher loading density resulted in efficient drying, at least up to 10.7 kg/m2. It was shown that the drying time to obtain stability was the lowest for moisture content (12.08 %) corresponding to aw of 0.65 in case of BET or GAB monolayer moisture content. This finding could be helpful in predicting the storage life of corn

Osmotic dehydration kinetics of oyster mushroom

This research was carried out to study the effect of osmotic dehydration behavior of oyster mushroom. The effect of solution concentration, immersion time and temperature on mass transfer parameters were observed during osmotic dehydration of oyster mushroom at three different temperatures −12, 27 and 45°C. A number of process parameters on osmotic dehydration such as water loss (WL), solid gain (SG), and normalized solid content (NSC) were investigated. Results showed that increase in salt concentration and immersion time resulted in %WL, %SG and NSC. The highest NSC (4.09 g solids/100g of initial weight of sample) was achieved for product osmosed in 25% salt solution for 6 hr immersion time. The pseudo diffusion coefficient, k was determined by using Fick’s First Law of diffusion equation. Plotting k values against inverse absolute temperature an Arrhenius type relationship was developed from which the calculated activation energy values of 1.8 and 3.64 kcal/gm-mole were obtained for 20% and 15% salt solution respectively

Geometric Mixing, Peristalsis, and the Geometric Phase of the Stomach

Mixing fluid in a container at low Reynolds number - in an inertialess environment - is not a trivial task. Reciprocating motions merely lead to cycles of mixing and unmixing, so continuous rotation, as used in many technological applications, would appear to be necessary. However, there is another solution: movement of the walls in a cyclical fashion to introduce a geometric phase. We show using journal-bearing flow as a model that such geometric mixing is a general tool for using deformable boundaries that return to the same position to mix fluid at low Reynolds number. We then simulate a biological example: we show that mixing in the stomach functions because of the "belly phase": peristaltic movement of the walls in a cyclical fashion introduces a geometric phase that avoids unmixing.Comment: Revised, published versio

Extreme genetic fragility of the HIV-1 capsid

Genetic robustness, or fragility, is defined as the ability, or lack thereof, of a biological entity to maintain function in the face of mutations. Viruses that replicate via RNA intermediates exhibit high mutation rates, and robustness should be particularly advantageous to them. The capsid (CA) domain of the HIV-1 Gag protein is under strong pressure to conserve functional roles in viral assembly, maturation, uncoating, and nuclear import. However, CA is also under strong immunological pressure to diversify. Therefore, it would be particularly advantageous for CA to evolve genetic robustness. To measure the genetic robustness of HIV-1 CA, we generated a library of single amino acid substitution mutants, encompassing almost half the residues in CA. Strikingly, we found HIV-1 CA to be the most genetically fragile protein that has been analyzed using such an approach, with 70% of mutations yielding replication-defective viruses. Although CA participates in several steps in HIV-1 replication, analysis of conditionally (temperature sensitive) and constitutively non-viable mutants revealed that the biological basis for its genetic fragility was primarily the need to coordinate the accurate and efficient assembly of mature virions. All mutations that exist in naturally occurring HIV-1 subtype B populations at a frequency >3%, and were also present in the mutant library, had fitness levels that were >40% of WT. However, a substantial fraction of mutations with high fitness did not occur in natural populations, suggesting another form of selection pressure limiting variation in vivo. Additionally, known protective CTL epitopes occurred preferentially in domains of the HIV-1 CA that were even more genetically fragile than HIV-1 CA as a whole. The extreme genetic fragility of HIV-1 CA may be one reason why cell-mediated immune responses to Gag correlate with better prognosis in HIV-1 infection, and suggests that CA is a good target for therapy and vaccination strategies

AFe2As2 (A = Ca, Sr, Ba, Eu) and SrFe_(2-x)TM_(x)As2 (TM = Mn, Co, Ni): crystal structure, charge doping, magnetism and superconductivity

The electronic structure and physical properties of the pnictide compound families $RE$OFeAs ($RE$ = La, Ce, Pr, Nd, Sm), $A$Fe$_{2}$As$_{2}$ ($A$ = Ca, Sr, Ba, Eu), LiFeAs and FeSe are quite similar. Here, we focus on the members of the $A$Fe$_{2}$As$_{2}$ family whose sample composition, quality and single crystal growth are better controllable compared to the other systems. Using first principles band structure calculations we focus on understanding the relationship between the crystal structure, charge doping and magnetism in $A$Fe$_{2}$As$_{2}$ systems. We will elaborate on the tetragonal to orthorhombic structural distortion along with the associated magnetic order and anisotropy, influence of doping on the $A$ site as well as on the Fe site, and the changes in the electronic structure as a function of pressure. Experimentally, we investigate the substitution of Fe in SrFe$_{2-x}TM_{x}$As$_{2}$ by other 3$d$ transition metals, $TM$ = Mn, Co, Ni. In contrast to a partial substitution of Fe by Co or Ni (electron doping) a corresponding Mn partial substitution does not lead to the supression of the antiferromagnetic order or the appearance of superconductivity. Most calculated properties agree well with the measured properties, but several of them are sensitive to the As $z$ position. For a microscopic understanding of the electronic structure of this new family of superconductors this structural feature related to the Fe-As interplay is crucial, but its correct ab initio treatment still remains an open question.Comment: 27 pages, single colum

A Deep Insight into the Sialotranscriptome of the Gulf Coast Tick, Amblyomma maculatum

Background: Saliva of blood sucking arthropods contains compounds that antagonize their hosts ’ hemostasis, which include platelet aggregation, vasoconstriction and blood clotting; saliva of these organisms also has anti-inflammatory and immunomodullatory properties. Perhaps because hosts mount an active immune response against these compounds, the diversity of these compounds is large even among related blood sucking species. Because of these properties, saliva helps blood feeding as well as help the establishment of pathogens that can be transmitted during blood feeding. Methodology/Principal Findings: We have obtained 1,626,969 reads by pyrosequencing a salivary gland cDNA library from adult females Amblyomma maculatum ticks at different times of feeding. Assembly of this data produced 72,441 sequences larger than 149 nucleotides from which 15,914 coding sequences were extracted. Of these, 5,353 had.75 % coverage to their best match in the non-redundant database from the National Center for Biotechnology information, allowing for the deposition of 4,850 sequences to GenBank. The annotated data sets are available as hyperlinked spreadsheets. Putative secreted proteins were classified in 133 families, most of which have no known function. Conclusions/Significance: This data set of proteins constitutes a mining platform for novel pharmacologically activ

Synthesis and White-Light Emission of ZnO/HfO2: Eu Nanocables

ZnO/HfO2:Eu nanocables were prepared by radio frequency sputtering with electrospun ZnO nanofibers as cores. The well-crystallized ZnO/HfO2:Eu nanocables showed a uniform intact core–shell structure, which consisted of a hexagonal ZnO core and a monoclinic HfO2 shell. The photoluminescence properties of the samples were characterized. A white-light band emission consisted of blue, green, and red emissions was observed in the nanocables. The blue and green emissions can be attributed to the zinc vacancy and oxygen vacancy defects in ZnO/HfO2:Eu nanocables, and the yellow–red emissions are derived from the inner 4f-shell transitions of corresponding Eu3+ ions in HfO2:Eu shells. Enhanced white-light emission was observed in the nanocables. The enhancement of the emission is ascribed to the structural changes after coaxial synthesis

Numerical study of nonlinear heat transfer from a wavy surface to a high permeability medium with pseudo-spectral and smoothed particle methods

Motivated by petro-chemical geological systems, we consider the natural convection boundary layer flow from a vertical isothermal wavy surface adjacent to a saturated non-Darcian high permeability porous medium. High permeability is considered to represent geologically sparsely packed porous media. Both Darcian drag and Forchheimer inertial drag terms are included in the velocity boundary layer equation. A high permeability medium is considered. We employ a sinusoidal relation for the wavy surface. Using a set of transformations, the momentum and heat conservation equations are converted from an (x, y) coordinate system to an (x,η) dimensionless system. The two-point boundary value problem is then solved numerically with a pseudo-spectral method based on combining the Bellman–Kalaba quasi linearization method with the Chebyschev spectral collocation technique (SQLM). The SQLM computations are demonstrated to achieve excellent correlation with smoothed particle hydrodynamic (SPH) Lagrangian solutions. We study the effect of Darcy number (Da), Forchheimer number (Fs), amplitude wavelength (A) and Prandtl number (Pr) on the velocity and temperature distributions in the regime. Local Nusselt number is also computed for selected cases. The study finds important applications in petroleum engineering and also energy systems exploiting porous media and undulating (wavy) surface geometry. The SQLM algorithm is shown to be exceptionally robust and achieves fast convergence and excellent accuracy in nonlinear heat transfer simulations

Proteases of haematophagous arthropod vectors are involved in blood-feeding, yolk formation and immunity : a review

Ticks, triatomines, mosquitoes and sand flies comprise a large number of haematophagous arthropods considered vectors of human infectious diseases. While consuming blood to obtain the nutrients necessary to carry on life functions, these insects can transmit pathogenic microorganisms to the vertebrate host. Among the molecules related to the blood-feeding habit, proteases play an essential role. In this review, we provide a panorama of proteases from arthropod vectors involved in haematophagy, in digestion, in egg development and in immunity. As these molecules act in central biological processes, proteases from haematophagous vectors of infectious diseases may influence vector competence to transmit pathogens to their prey, and thus could be valuable targets for vectorial control