52 research outputs found
A new method for the joint visualization of vascular structures and connective tissues: Corrosion casting and 1 N NaOH maceration
Corrosion casting combined with scanning electron microscopy (SEM) has been widely used to study the morphofunctional aspects of microcirculation in many organs. In this study, we present an optimization of the corrosion casting (CC) technique associating it with NaOH 1 N maceration method to obtain a clear visualization of the relationships existing between the microvascular architecture of an organ and its extracellular matrix. Briefly, experiments were performed macerating the tissue previously injected with a low viscosity acrylic resin in 1 N NaOH and then observing it at SEM. In this study, we present an application of this technique to better evaluate the extracellular components of the vascular wall in medium-sized and capillary vessels both in skin and in kidney. The results obtained yielded clear images of the three-dimensional layout of medium-sized and capillary vessels in comparison with the extracellular environment. Furthermore, detailed information was obtained on the three-dimensional layout of fibers constituting the walls of venules, arterioles, and capillaries. In addition, the tubular collagenic structures surrounding the excretory tubules of the kidney and the dermal glands of the skin were depicted and their relationships with their vascular supply described in detail. © 2006 Wiley-Liss, Inc
Model-Based Control of Torque and Nitrogen Oxide Emissions in a Euro {VI} 3.0 L Diesel Engine through Rapid Prototyping
In the present paper, a model-based controller of engine torque and engine-out Nitrogen oxide (NOx) emissions, which was previously developed and tested by means of offline simulations, has been validated on a FPT F1C 3.0 L diesel engine by means of rapid prototyping. With reference to the previous version, a new NOx model has been implemented to improve robustness in terms of NOx prediction. The experimental tests have confirmed the basic functionality of the controller in transient conditions, over different load ramps at fixed engine speeds, over which the average RMSE (Root Mean Square Error) values for the control of NOx emissions were of the order of 55-90 ppm, while the average RMSE values for the control of brake mean effective pressure (BMEP) were of the order of 0.25-0.39 bar. However, the test results also highlighted the need for further improvements, especially concerning the effect of the engine thermal state on the NOx emissions in transient operation. Moreover, several aspects, such as the check of the computational time, the impact of the controller on other pollutant emissions, or on the long-term engine operations, will have to be evaluated in future studies in view of the controller implementation on the engine control unit
In Vitro Activity of Essential Oils Against Planktonic and Biofilm Cells of Extended-Spectrum β-Lactamase (ESBL)/Carbapenamase-Producing Gram-Negative Bacteria Involved in Human Nosocomial Infections
The aim of this study was to analyze the antibacterial activity of four essential oils
(EOs), Melaleuca alternifolia, Eucalyptus globulus, Mentha piperita, and Thymus vulgaris, in preventing
the development and spread of extended-spectrum -lactamase (ESBL)-producing Escherichia coli
and Klebsiella pneumoniae, metallo-beta-lactamase (MBL)-producing Pseudomonas aeruginosa and
carbapenemase (KPC)-producing Klebsiella pneumoniae. A total of 60 strains were obtained from the
stock collection from the Microbiology Laboratory of Hesperia Hospital, Modena, Italy. Twenty ESBLproducing
E. coli, 5 K. pneumoniae, 13 KPC-producing K. pneumoniae, and 20 MBL-producing
P. aeruginosa were cultured and reconfirmed as ESBL and carbapenamase producers. Polymerase chain
reaction was used for the detection of genes responsible for antibiotic resistance (ESBL and KPC/MBL).
Antibacterial activity of the EOs was determined using the agar disk diusion assay, and minimal
inhibitory concentrations (MICs) were also evaluated. Lastly, adhesion capability and biofilm
formation on polystyrene and glass surfaces were studied in 24 randomly selected strains. M. alternifolia
and T. vulgaris EOs showed the best antibacterial activity against all tested strains and, as revealed by
agar disk diusion assay, M. alternifolia was the most eective, even at low concentrations. This eect
was also confirmed by MICs, with values ranging from 0.5 to 16 g/mL and from 1 to 16 g/mL,
for M. alternifolia and T. vulgaris EOs, respectively. The EOs’ antibacterial activity compared to
antibiotics confirmed M. alternifolia EO as the best antibacterial agent. T. vulgaris EO also showed
a good antibacterial activity with MICs lower than both reference antibiotics. Lastly, a significant
anti-biofilm activity was observed for the two EOs (*P < 0.05 and **P < 0.01 for M. alternifolia and
T. vulgaris EOs, respectively). A good antibacterial and anti-biofilm activity of M. alternifolia and T.
vulgaris EOs against all selected strains was observed, thus demonstrating a future possible use of
these EOs to treat infections caused by ESBL/carbapenemase-producing strains, even in association
with antibiotics
Histology and ultrastructure of a tissue-engineered collagen meniscus before and after implantation
The collagen meniscus implant (CMI) is a tissue-engineering technique designed to stimulate regeneration of meniscus-like tissue in cases of irreparable tears or previous meniscectomy. CMI morphology was investigated before and after implantation by light microscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). In a case series biopsy specimens were harvested from four patients who underwent a second arthroscopic look 6 months after placement of the CMI. CMI sections appeared composed of parallel connective laminae of 10-30 mu m, connected by smaller bundles (5-10 mu m). This connective network formed lacunae with diameters between 40 and 60 mu m. At greater magnification, the walls of the lacunae demonstrated tightly packed and randomly distributed collagen fibrils, with diameters ranging from 73 to 439 nm. In the biopsy specimens, the lacunae were filled with connective tissue that contained newly formed vessels and fibroblast-like cells, presenting an abundant rough endoplasmic reticulum and several mitochondria. In the extracellular matrix, the collagen fibrils showed uniform diameters (126 nm +/- 32 nm). The original structure of CMI was still recognizable, and no inflammatory cells were detected within the implant. The morphological findings of this case series demonstrate that CMI provides a three-dimensional scaffold suitable for colonization by precursor cells and vessels and leading to the formation of a fully functional tissue
What are the Effects of Contamination Risks on Commercial and Industrial Properties? Evidence from Baltimore, Maryland
An Empirical Contribution to the Debate on Corruption, Democracy and Environmental Policy
Urban Environmental Health and Sensitive Populations: How Much are the Italians Willing to Pay to Reduce Their Risks?
- …