157 research outputs found

    Early Portuguese meteorological measurements (18th century)

    Get PDF
    Natural proxies, documentary evidence and instrumental data are the only sources used to reconstruct past climates. In this paper, we present the 18th century meteorologists (either Portuguese or foreigners) who made the first observations at several sites in Continental Portugal, Madeira Island and Rio de Janeiro (Brazil), from 1749 until 1802. Information is given concerning observation site, variables observed, measurement period, methods of measurements and sources (both manuscript and printed). Some examples from the data usefulness are given: rainfall variability in Madeira (1749–1753) and in continental Portugal (1781–1793) was reconstructed, allowing to extend towards the late 18th century the well known negative correlation between the NAO index and seasonal rainfall. Furthermore, previously unpublished data for 1783–1784 have allowed analysing the consequences of the Lakagígar eruption in Portugal: foggy and haze days are referred to in summer 1783, but unlike the hot summer observed in northern and central Europe, temperatures in Portugal were lower than average. Additionally, observations from Rio de Janeiro in Brazil show that the Lakagígar consequences may well have spread to sectors of the Southern Hemisphere. Although the series are short, the data have been used for climate reconstruction studies and may also be useful to improve the quality of large scale reconstruction datasets.info:eu-repo/semantics/publishedVersio

    Distribuição de Silício em bananeiras inoculadas com Fusarium oxysporum f. sp. Cubense

    Get PDF
    O mal-do-Panamá, reconhecida como uma das doenças mais destrutivas da bananeira no mundo tem causado enormes prejuízos aos produtores de banana. Dentre as alternativas testadas para o controle de doenças de plantas, encontra-se o uso do silício (Si), que tem apresentado efeitos benéficos em várias espécies, proporcionando efetivo controle de doenças em plantas. O objetivo deste trabalho foi avaliar a resposta da planta, a absorção e translocação de silício em bananeiras inoculadas com Fusarium oxysporum f. sp. cubense. Os tratamentos constaram de 0, 250, 500, 750 e 1000 mg dm-3 de Si, mais um tratamento adicional (testemunha absoluta - sem silício e sem a inoculação com F. oxysporum. f. sp. cubense). O solo em cada vaso foi incubado com Si por 15 dias. Decorrido este período, plantas de bananeira das variedades Grande Naine, Tropical e Maçã, oriundas de cultura de tecidos, foram transferidas para vasos contendo 3 kg de solo. A inoculação com F. oxysporum. procedeu-se 40 dias após o transplantio das plantas para os vasos. Foram determinados a produção da matéria seca da raiz (MSR) e da parte aérea (MSPA), teores de Si na parte aérea e raízes e o índice de translocação. A adição de doses crescentes de Si ao solo elevou a produção da matéria seca da raiz e da parte aérea das plantas de bananeiras. As plantas de bananeiras absorveram e translocaram silício para a parte aérea comportando-se como uma planta acumuladora intermediária de Si

    Adição de Si em um latossolo amarelo distrocoeso: alterações nos atributos químicos.

    Get PDF
    As alterações decorrentes da adição de silício ao solo tem sido estudadas sob vários aspectos químicos. Os silicatos possuem efeito corretivo, isto é, têm a capacidade de neutralizar a acidez do solo e produzir o ácido monossilícico, que é a principal forma de Si absorvida pelas plantas. Com a sua aplicação no solo, o pH aumenta, os teores de Al+3 diminuem, a saturação por bases aumenta e a saturação por Al diminui. Isto acontece porque os silicatos promovem a reação dos ânions SiO3-2 com os prótons de H+ na solução do solo. O objetivo deste trabalho foi avaliar as alterações químicas de um Latossolo Amarelo Distrocoeso em função da adição de silício. Como fonte de Si foi utilizado o Agrosilício® (Recmix do Brasil S.A.). Amostras de solo foram coletadas na camada de 0-50 cm de profundidade, secas ao ar e tamisadas em peneira de 4mm de abertura. Foram tomadas subamostras e passadas em peneira de 2mm de abertura de malha, constituindo a terra fina seca ao ar para caracterização química, em seguida amostras de 3 Kg de solo foram incubadas com as doses de Si (0, 250, 500, 750 e 1000 mg dm-3 ) por um período de 15 dias. Após o período de incubação, foi feita a homogeneização do solo presente em cada vaso, e foram coletadas amostras simples, que foram submetidas à análise química. A adição de doses crescentes de Si no solo promoveu alterações nos atributos químicos, aumentando o pH do solo, disponibilizado nutrientes como fósforo, cálcio, magnésio e silício

    Relevance and quality of climate planning for large and medium-sized cities of the Tropics

    Get PDF
    In the last seven years, the number of plans with climate measures for tropical cities has increased 2.3 times compared to the previous seven years as a result of the initiatives of central and local governments, multi-bilateral development aid and development banks. The plans matter in achieving the 11th United Nations’ Sustainable development goal. Therefore, the objective of this chapter is to ascertain the relevance and quality of climate planning in large and medium-sized cities in the Tropics. The chapter proposes and applies the QCPI-Quality of Climate Plans Index, consisting of 10 indicators (characterization of climate, number, quantification, relevance, potential impact, cost, funding sources, timetable and responsibility of measures, implementation monitoring and reporting). It is revealed that 338 tropical cities currently have a local development, emergency, master, mitigation, adaptation, risk reduction plan or a resilience or smart city strategy. These tools were unquestionably more common in large cities, especially in OCDE and BRICS countries, while they were rare in Developing Countries. Local development plans (Municipal development, general, comprehensive) were the most common in medium-sized cities, along with those with the lowest quality, while stand-alone strategies and plans (resilience, mitigation, sustainable, adaptation), applied mostly in big cities, present much higher quality

    Porta-enxertos e enxertia de castanheira-do-brasil pelo método da borbulhia em placa.

    Get PDF
    Grande parte da produção de castanha-do-brasil é oriunda do extrativismo em áreas nativas, sendo o sucesso da exploração em sistemas de cultivo altamente dependente de técnicas de propagação vegetativa, para manutenção das características genéticas e encurtamento do período juvenil de genótipos selecionados. Este estudo teve como objetivos determinar a idade ótima de porta-enxertos de castanheira para realização da enxertia por borbulhia em placa, bem como verificar a porcentagem de sobrevivência de enxertos e o crescimento inicial de brotações de diferentes genótipos em Roraima. Para isso foram instalados dois experimentos no delineamento de blocos casualizados, com quatro repetições. Os tratamentos foram arranjados em esquema de parcela subdividida no tempo, sendo genótipos as parcelas e tempos de avaliação as subparcelas. Foram avaliadas variáveis de crescimento dos porta-enxertos e porcentagem de enxertos vivos e variáveis de crescimento das brotações dos enxertos. Os porta-enxertos atingiram porte recomendado para enxertia entre os 26 e 34 meses após o plantio, indicando crescimento mais lento quando comparado com outros locais. Aos 1 20 dias após a enxertia foram obtidas porcentagens de sobrevivência de enxertos variando de 25% a 1 00%, dependendo do genótipo do enxerto. A porcentagem média geral de sobrevivência foi superior a 70%. O crescimento (altura, diâmetro e número de brotações laterais) das brotações observado para alguns genótipos é indicativo da adaptação desses às condições de cultivo consideradas. Como a castanheira é uma espécie perene, tanto o crescimento em idades mais avançadas, quanto a futura produtividade e longevidade das plantas deverão ser monitoradas

    VgrG and PAAR Proteins Define Distinct Versions of a Functional Type VI Secretion System

    Get PDF
    The Type VI secretion system (T6SS) is widespread among bacterial pathogens and acts as an effective weapon against competitor bacteria and eukaryotic hosts by delivering toxic effector proteins directly into target cells. The T6SS utilises a bacteriophage-like contractile machinery to expel a puncturing device based on a tube of Hcp topped with a VgrG spike, which can be extended by a final tip from a PAAR domain-containing protein. Effector proteins are believed to be delivered by specifically associating with particular Hcp, VgrG or PAAR proteins, either covalently ('specialised') or non-covalently ('cargo' effectors). Here we used the T6SS of the opportunistic pathogen Serratia marcescens, together with integratecd genetic, proteomic and biochemical approaches, to elucidate the role of specific VgrG and PAAR homologues in T6SS function and effector specificity, revealing new aspects and unexpected subtleties in effector delivery by the T6SS. We identified effectors, both cargo and specialised, absolutely dependent on a particular VgrG for delivery to target cells, and discovered that other cargo effectors can show a preference for a particular VgrG. The presence of at least one PAAR protein was found to be essential for T6SS function, consistent with designation as a 'core' T6SS component. We showed that specific VgrG-PAAR combinations are required to assemble a functional T6SS and that the three distinct VgrG-PAAR assemblies in S. marcescens exhibit distinct effector specificity and efficiency. Unexpectedly, we discovered that two different PAAR-containing Rhs proteins can functionally pair with the same VgrG protein. Showing that accessory EagR proteins are involved in these interactions, native VgrG-Rhs-EagR complexes were isolated and specific interactions between EagR and cognate Rhs proteins identified. This study defines an essential yet flexible role for PAAR proteins in the T6SS and highlights the existence of distinct versions of the machinery with differential effector specificity and efficiency of target cell delivery

    Modelling the spatiotemporal change of canopy urban heat islands

    Get PDF
    This study models the spatiotemporal change of Birmingham’s urban heat island (UHI) using air temperature measurements made during the HiTemp project to study the atmospheric conditions over the city [1]. The study identifies the causative factors and their contributions to the formation of UHI, based on a number of data used to build 2.5 D model; land cover, land use, geometrical factors and shadow layers. The raw air temperature measurements were filtered, georeferenced and interpolated to create maps of temperature variations. The expected influencing parameters on the development of the UHI were derived and prepared for regression modelling. The results showed that the difference in temperature across Birmingham city through two years of ground measurements (June 2012 – June 2014) reached up to 13.53 °C. The UHI’s appeared daytime and night-time throughout the different seasons for approximately 56% of the total hours during the study period. However, the high intensity events happened during the calm and clear nights. Moreover, buildings’ shadow provided up to 2 °C reduction to the air temperature, while the wind speed and direction are responsible for the size and distribution of hot spots. The built up area contributed to increase the UHI, whereas, the other types of land cover and the geometrical parameters, contributed less

    Levantamento preliminar, identificacao botanica e valor nutritivo de plantas forrageiras nativas da Bacia do Parnaiba.

    Get PDF
    Plantas nativas constituem importante suporte forrageiro na area da Bacia do Parnaiba, onde a pecuaria desempenha relevante papel economico. Este trabalho teve como objetivo o levantamento e a identificacao botanica dessas forrageiras para a Regiao Meio-Norte
    corecore