ELT HARMONI: Image Slicer Preliminary Design

Harmoni is the ELT's first light visible and near-infrared integral field spectrograph. It will provide four different spatial scales, ranging from coarse spaxels of 60 x 30 mas best suited for seeing limited observations, to 4 mas spaxels that Nyquist sample the diffraction limited point spread function of the ELT at near-infrared wavelengths. Each spaxel scale may be combined with eleven spectral settings, that provide a range of spectral resolving powers from R 3500 to R 20000 and instantaneous wavelength coverage spanning the 0.47 - 2.45 {\mu}m wavelength range of the instrument. The consortium consists of several institutes in Europe under leadership of Oxford University. Harmoni is starting its Final Design Phase after a Preliminary Design Phase in November, 2017. The CRAL has the responsibility of the Integral Field Unit design linking the Preoptics to the 4 Spectrographs. It is composed of a field splitter associated with a relay system and an image slicer that create from a rectangular Field of View a very long (540mm) output slit for each spectrograph. In this paper, the preliminary design and performances of Harmoni Image Slicer will be presented including image quality, pupil distortion and slit geometry. It has been designed by CRAL for Harmoni PDR in November, 2017. Special emphases will be put on straylight analysis and slice diffraction. The optimisation of the manufacturing and slit geometry will also be reported.Comment: 13 pages, 19 figures, 4 tables, Submitted to SPIE Astronomical Telescopes and Instrumentatio

Titania-doped tantala/silica coatings for gravitational-wave detection

Reducing thermal noise from optical coatings is crucial to reaching the required sensitivity in next generation interferometric gravitational-wave detectors. Here we show that adding TiO2 to Ta2O5 in Ta2O5/SiO2 coatings reduces the internal friction and in addition present data confirming it reduces thermal noise. We also show that TiO2-doped Ta2O5/SiO2 coatings are close to satisfying the optical absorption requirements of second generation gravitational-wave detectors

The E-ELT first light spectrograph HARMONI: capabilities and modes

Trabajo presentado en SPIE Astronomical Telescopes, celebrado en San Diego (California), del 26 de junio al 1 de julio de 2016HARMONI is the E-ELT's first light visible and near-infrared integral field spectrograph. It will provide four different spatial scales, ranging from coarse spaxels of 60 × 30 mas best suited for seeing limited observations, to 4 mas spaxels that Nyquist sample the diffraction limited point spread function of the E-ELT at near-infrared wavelengths. Each spaxel scale may be combined with eleven spectral settings, that provide a range of spectral resolving powers (R 3500, 7500 and 20000) and instantaneous wavelength coverage spanning the 0.5 - 2.4 ¿m wavelength range of the instrument. In autumn 2015, the HARMONI project started the Preliminary Design Phase, following signature of the contract to design, build, test and commission the instrument, signed between the European Southern Observatory and the UK Science and Technology Facilities Council. Crucially, the contract also includes the preliminary design of the HARMONI Laser Tomographic Adaptive Optics system. The instrument's technical specifications were finalized in the period leading up to contract signature. In this paper, we report on the first activity carried out during preliminary design, defining the baseline architecture for the system, and the trade-off studies leading up to the choice of baseline

Low loss coatings for the VIRGO large mirrors

présentée par L. PinardThe goal of the VIRGO program is to build a giant Michelson type interferometer (3 kilometer long arms) to detect gravitational waves. Large optical components (350 mm in diameter), having extremely low loss at 1064 nm, are needed. Today, the Ion beam Sputtering is the only deposition technique able to produce optical components with such performances. Consequently, a large ion beam sputtering deposition system was built to coat large optics up to 700 mm in diameter. The performances of this coater are described in term of layer uniformity on large scale and optical losses (absorption and scattering characterization). The VIRGO interferometer needs six main mirrors. The first set was ready in June 2002 and its installation is in progress on the VIRGO site (Italy). The optical performances of this first set are discussed. The requirements at 1064 nm are all satisfied. Indeed, the absorption level is close to 1 ppm (part per million), the scattering is lower than 5 ppm and the R.M.S. wavefront of these optics is lower than 8 nm on 150 mm in diameter. Finally, some solutions are proposed to further improve these performances, especially the absorption level (lower than 0.1 ppm) and the mechanical quality factor Q of the mirrors (thermal noise reduction)

4MOST : the 4-metre multi-object spectroscopic telescope project in the assembly, integration, and test phase

4MOST is a new high-multiplex, wide-field spectroscopic survey facility under construction for ESO's 4m-VISTA telescope at Paranal, Chile. Its key specifications are: a large field of view of 4.4 square degrees, a high multiplex fibre positioner based on the tilting spine principle that positions 2436 science fibres in the focal surface of which 1624 fibres go to two low-resolution optical spectrographs (R = λ/Δλ ~ 6500) and 812 fibres transfer light to the high-resolution optical spectrograph (R ~ 20,000). Currently, almost all subsystems are completed and full testing in Europe will be finished in spring 2023, after which 4MOST will be shipped to Chile. An overview is given of instrument construction and capabilities, the planned science of the consortium and the recently selected community programmes, and the unique operational scheme of 4MOST

Métrologie en milieu cryogénique grâce à un périscope de pointe

International audienceThe PIC (Photogrammetry Inside Cryostat) is a cutting-edge periscope designed to be used during the prototyping, testing and alignment phase of HARMONI, one of the first-generation instruments of the Extremely Large Telescope. The challenge posed by operating the HARMONI instrument at a temperature of 130 K required the development of different non-contact measurement techniques to qualify optical and mechanical parts without touching them. Photogrammetry is a non-contact measurement technique, but it needed to be adapted to be used in a cryostat ; this led to the development of the PIC. The periscope consists of a combination of six lenses, two mirrors, and three motorized degrees of freedom (the whole is mounted upside down on the lid of the test cryostat at CRAL in Lyon) and work together with an external camera to capture images at various angles. This is essential for obtaining accurate photogrammetric measurements. The motorized rotation systems allow for precise and controlled movements, and the combination of lenses and mirrors ensure that the images captured by the external camera are of the highest quality. The goal of the PIC is to obtain an accuracy of 25 µm + 5 µm/m, making it an essential component of the HARMONI tools and a major advancement in cryogenic photogrammetry.Le PIC (Photogrammetry Inside Cryostat) est un périscope de pointe conçu pour être utilisé pendant la phase de prototypage, de test et d'alignement de HARMONI, l'un des instruments de première génération de l'Extremely Large Telescope. Le défi posé par le fonctionnement de l'instrument HARMONI à une température de 130 K a nécessité le développement de différentes techniques de mesure sans contact pour qualifier les pièces optiques et mécaniques sans les toucher. La photogrammétrie est une technique de mesure sans contact, mais elle devait être adaptée pour être utilisée dans un cryostat, ce qui a conduit au développement du PIC. Le périscope se compose d'une combinaison de six lentilles, de deux miroirs et de trois degrés de liberté motorisés (l'ensemble est monté à l'envers sur le couvercle du cryostat d'essai du CRAL à Lyon) et fonctionne avec une caméra externe pour capturer des images sous différents angles. Ceci est essentiel pour obtenir des mesures photogrammétriques précises. Les systèmes de rotation motorisés permettent des mouvements précis et contrôlés, et la combinaison de lentilles et de miroirs garantit que les images capturées par la caméra externe sont de bonne qualité. L'objectif du PIC est d'obtenir une précision de 25 µm + 5 µm/m, ce qui en fait une composante essentielle des outils d'AIT d'HARMONI et une avancée majeure dans la photogrammétrie cryogénique

Expected performance and simulated observations of the instrument HARMONI at the European Extremely Large Telescope (E-ELT)

Trabajo presentado en SPIE Astronomical Telescopes, celebrado en San Diego (California), del 15 de junio al 2 de julio de 2010HARMONI has been conceived as a workhorse visible and near-infrared (0.47-2.45 microns) integral field spectrograph for the European Extremely Large Telescope (E-ELT). It provides both seeing and diffraction limited observations at several spectral resolutions (R= 4000, 10000, 20000). HARMONI can operate with almost any flavor of AO (e.g. GLAO, LTAO, SCAO), and it is equipped with four spaxel scales (4, 10, 20 and 40 mas) thanks to which it can be optimally configured for a wide variety of science programs, from ultra-sensitive observations of point sources to highangular resolution spatially resolved studies of extended objects. In this paper we describe the expected performance of the instrument as well as its scientific potential. We show some simulated observations for a selected science program, and compare HARMONI with other ground and space based facilities, like VLT, ALMA, and JWST, commenting on their synergies and complementarities

HARMONI: a single-field wide-band integral-field spectrograph for the European ELT

Trabajo presentado en SPIE Astronomical Telescopes, celebrado en San Diego (California), del 15 de junio al 2 de julio de 2010We describe the results of a Phase A study for a single field, wide band, near-infrared integral field spectrograph for the European Extremely Large Telescope (E-ELT). HARMONI, the High Angular Resolution Monolithic Optical & Nearinfrared Integral field spectrograph, provides the E-ELT’s core spectroscopic requirement. It is a work-horse instrument, with four different spatial scales, ranging from seeing to diffraction-limited, and spectral resolving powers of 4000, 10000 & 20000 covering the 0.47 to 2.45 μm wavelength range. It is optimally suited to carry out a wide range of observing programs, focusing on detailed, spatially resolved studies of extended objects to unravel their morphology, kinematics and chemical composition, whilst also enabling ultra-sensitive observations of point sources. We present a synopsis of the key science cases motivating the instrument, the top level specifications, a description of the opto-mechanical concept, operation and calibration plan, and image quality and throughput budgets. Issues of expected performance, complementarity and synergies, as well as simulated observations are presented elsewhere in these proceeding

The E-ELT first light spectrograph HARMONI: capabilities and modes

HARMONI is the E-ELT’s first light visible and near-infrared integral field spectrograph. It will provide four different spatial scales, ranging from coarse spaxels of 60 × 30 mas best suited for seeing limited observations, to 4 mas spaxels that Nyquist sample the diffraction limited point spread function of the E-ELT at near-infrared wavelengths. Each spaxel scale may be combined with eleven spectral settings, that provide a range of spectral resolving powers (R ~3500, 7500 and 20000) and instantaneous wavelength coverage spanning the 0.5 – 2.4 μm wavelength range of the instrument. In autumn 2015, the HARMONI project started the Preliminary Design Phase, following signature of the contract to design, build, test and commission the instrument, signed between the European Southern Observatory and the UK Science and Technology Facilities Council. Crucially, the contract also includes the preliminary design of the HARMONI Laser Tomographic Adaptive Optics system. The instrument’s technical specifications were finalized in the period leading up to contract signature. In this paper, we report on the first activity carried out during preliminary design, defining the baseline architecture for the system, and the trade-off studies leading up to the choice of baseline