Development and Validation of Web-based Courseware for Junior Secondary School Basic Technology Students in Nigeria

This research aimed to develop and validate a web-based courseware for junior secondary school basic technology students in Nigeria. In this study, a mixed method quantitative pilot study design with qualitative components was used to test and ascertain the ease of development and validation of the web-based courseware. Dick and Carey instructional system design model was adopted for developing the courseware. Convenience sampling technique was used in selecting the three content, computer and educational technology experts to validate the web-based courseware. Non-randomized and non-equivalent Junior secondary school students from two schools were used for field trial validation. Four validating instruments were employed in conducting this study: (i) Content Validation Assessment Report (CVAR); (ii) Computer Expert Validation Assessment Report (CEAR); (iii) Educational Technology Experts Validation Assessment Report (ETEVAR); and (iv) Students Validation Questionnaire (SVQ). All the instruments were face and content validated. SVQ was pilot tested and reliability coefficient of 0.85 was obtained using Cronbach Alpha. CVAR, CEAR, ETEVAR were administered on content specialists, computer experts, and educational technology experts, while SVQ was administered on 83 JSS students from two selected secondary schools in Minna. The findings revealed that the process of developing web-based courseware using Dick and Carey Instructional System Design was successful. In addition, the report from the validating team revealed that the web-based courseware is valuable for learning basic technology. It is therefore recommended that web-based courseware should be produced to teach basic technology concepts on large scale

Development and Validation of Web-based Courseware for Junior Secondary School Basic Technology Students in Nigeria

This research aimed to develop and validate a web-based courseware for junior secondary school basic technology students in Nigeria. In this study, a mixed method quantitative pilot study design with qualitative components was used to test and ascertain the ease of development and validation of the web-based courseware. Dick and Carey instructional system design model was adopted for developing the courseware. Convenience sampling technique was used in selecting the three content, computer and educational technology experts to validate the web-based courseware. Non-randomized and non-equivalent Junior secondary school students from two schools were used for field trial validation. Four validating instruments were employed in conducting this study: (i) Content Validation Assessment Report (CVAR); (ii) Computer Expert Validation Assessment Report (CEAR); (iii) Educational Technology Experts Validation Assessment Report (ETEVAR); and (iv) Students Validation Questionnaire (SVQ). All the instruments were face and content validated. SVQ was pilot tested and reliability coefficient of 0.85 was obtained using Cronbach Alpha. CVAR, CEAR, ETEVAR were administered on content specialists, computer experts, and educational technology experts, while SVQ was administered on 83 JSS students from two selected secondary schools in Minna. The findings revealed that the process of developing web-based courseware using Dick and Carey Instructional System Design was successful. In addition, the report from the validating team revealed that the web-based courseware is valuable for learning basic technology. It is therefore recommended that web-based courseware should be produced to teach basic technology concepts on large scale

Drivers of technical efficiency in cassava processing in Nigeria: implications for a commercializing food sector

Open Access JournalRésumé La plupart des politiques agricoles au Nigeria ont pour objectif d’intégrer les petits agriculteurs dans l'économie de marché. Au cours de la dernière décennie, le Nigéria a connu un important apport de capitaux privés et publics dans la promotion des unités de transformation du manioc de petite échelle. Cette étude utilise la fonction de frontière stochastique et des données d’entrées/sorties pour mesurer et expliquer les efficacités techniques (ET) de 274 entreprises de petite et moyenne taille. L'étude a montré que les entreprises de transformation du manioc ont une efficacité technique moyenne de 43% t, indiquant qu'une très grande proportion de la valeur de la production (57%) est perdue en raison des inefficacités propres aux entreprises. Les entreprises de transformation de la zone du Centre-Nord ont enregistré l’efficacité technique moyenne la plus élevée (61%), suivies par celle de la zone du Sud-Est / Sud-Ouest (42%) et enfin celle du Sud-Sud (26%). Les valeurs de l’ ET étaient inférieures à 80% pour environ 85% des entreprises échantillonnées. Les efficacités techniques sont influencées par la classification de l'entreprise (petite ou moyenne taille, propriété individuelle ou propriété familiale), les facteurs sociaux (interactions avec d'autres acteurs), économiques (nombre de produits, de clients ou de commandes reçues) et la participation à un atelier de formation. Les gouvernements et les institutions ayant un rôle statutaire dans la promotion des chaînes de valeurs agricoles devraient envisager de façon adéquate l’encouragement et la promotion des unités de transformateurs de manioc de petite et moyenne taille et ceci, avec beaucoup plus de vigueur. L’organisation régulière d’ateliers pour renforcer les capacités et l'efficacité des transformateurs est également recommandée. Abstract Most agriculture policies in Nigeria are aimed at integrating the rural poor into market economy. In the last decade, Nigeria witnessed significant private and public injection of capital into the promotion of small-medium scale cassava processing. This study uses a stochastic frontier function and inputs/outputs data to measure technical efficiencies (TE) of 274 small-medium cassava processing firms in Nigeria. Results showed that the cassava processing enterprises had a mean TE of 43 percent, indicating that, a large proportion of output value (57%) is lost due to firm-specific inefficiencies. Cassava processing enterprises in the north-central area of Nigeria recorded a mean TE of 61% (highest), followed by South-east/South-west (42%) and South-south (26%). TE values were below 80% for about 85% percent of the sampled enterprises. Technical efficiencies were influenced by enterprise classification (small-medium, sole proprietorship or family ownership), social factors (interaction with other actors), economic (number of products, clients or orders received) and attendance of training workshop. It is recommended that government and institutions with statutory role to promote agricultural value chains should consider encouraging and promoting small-medium scale cassava processing the more with adequate impetus. Constant training workshops to improve the skills and efficiency of the cassava processors are also recommended

CHEMICAL COMPOSITION OF SOLID MINERALS FROM LOKOJA AND JOS IN NORTH CENTRAL NIGERIA

The structural, qualitative and quantitative analysis of grained rock samples were carried out with the view to establishing the mineral components present in the samples. Two samples were collectedfrom a mining site in Jos, Plateau State as well as from another mining site in Lokoja, Kogi State.The two samples were prepared for XRD analysis using a backloading preparation method and done with X-ray diffractometer. The analysis confirmed the presence of minerals such as Cassiterite (SnO2), Ilmenite (FeTiO3), Zircon (SiO4),Columbite (Fe), Manganoan in the ample from Jos as a result of the matching of the peaks with the database 2θ values. The percentage area integration of the various phases which correlated to the quantity of the various minerals in the sample revealed that Cassiterite(Tin Oxide) of 65.9% value was from Jos and is a Tin Ore. The grain sizes for Cassiterite (SnO2), Ilmenite (FeTiO3), Zircon (SiO4), Columbite (Fe), Manganoan are 17.674, 35.348, 37.208, 70.695, 20.199 in nm respectively. The samples from Lokoja showed the presence of Magnetite (Fe¬3O4), Quartz (SiO2), Hematite (Fe2O3) and Geothite(FeO(OH)) and confirmed the grain sizes of 28.278, 35.348, 28.278. 17.673 and 23.565 in nm respectively.The constituents of Lokoja samples, all of which contained Iron Oxide also indicate that the sample is an Iron Ore. These findings confirm the fact that the mineral resources that are present in these regions of the country areeconomically viable and have the potential to boost economy and industrial development&nbsp

The SLUGGS survey: globular clusters and the dark matter content of early-type galaxies

A strong correlation exists between the total mass of a globular cluster (GC) system and the virial halo mass of the host galaxy. However, the total halo mass in this correlation is a statistical measure conducted on spatial scales that are some 10 times that of a typical GC system. Here we investigate the connection between GC systems and galaxy's dark matter on comparable spatial scales, using dynamical masses measured on a galaxy-by-galaxy basis. Our sample consists of 17 well-studied massive (~10 x 11 M☉) early-type galaxies from the SLUGGS survey. We find the strongest correlation to be that of the blue (metal-poor) GC subpopulation and the dark matter content. This correlation implies that the dark matter mass of a galaxy can be estimated to within a factor of 2 from careful imaging of its GC system. The ratio of the GC system mass to that of the enclosed dark matter is nearly constant. We also find a strong correlation between the fraction of blue GCs and the fraction of enclosed dark matter, so that a typical galaxy with a blue GC fraction of 60 per cent has a dark matter fraction of 86 per cent over similar spatial scales. Both halo growth and removal (via tidal stripping) may play some role in shaping this trend. In the context of the two-phase model for galaxy formation, we find galaxies with the highest fractions of accreted stars to have higher dark matter fractions for a given fraction of blue GCs

Prevalence and factors associated with suicidal ideation amongst college students in the Nelson Mandela Bay Municipality, South Africa

Background: Suicidal behaviour amongst college students constitutes a significant social and public health problem globally. This study determined the prevalence and associated factors of suicidal ideation amongst students of higher education in the Nelson Mandela Bay Municipality (NMBM), South Africa. Methods: In this institution-based cross-sectional study, a multistage cluster sampling of 826 participants, drawn from a college in NMBM, was conducted from January to March 2020. Data were collected with a standardised self-administered questionnaire. Multivariable logistic regression analysis was used to identify the factors associated with suicidal ideation. Results: Participants’ ages ranged from 18 to 24 years, with a mean age of 20.49 years (standard deviation, 1.88 years). The lifetime prevalence of suicidal ideation and plans in the preceding 12 months were 24.5% and 9.6%, respectively. The odds of suicidal ideation were higher in students who experienced bullying (adjusted odds ratio [AOR], 1.89; 95% confidence interval [CI], 1.35–2.65), mental illness (AOR, 1.89; 95% CI, 1.35–2.65), a history of sexual assault (AOR, 2.50; 95% CI, 1.20–5.21) and experience of sexual assault by or to a close family member (AOR, 1.69; 95% CI, 1.01–2.82). Underlying chronic illness was associated with a twofold risk for suicidal ideation in both sexes. Conclusion: About a quarter of the students sampled at the college had experienced suicidal ideation and some had had suicidal plans in the preceding 12 months. Screening for the identified risk factors amongst the student population coupled with prompt interventions would mitigate the risk of suicide in the study population. Keywords: suicidal behaviour; suicidal plans; higher education; students; South Africa

Investigation and Comparison of Heat Generated by Coloured Metallic Plates in Response to the Emissive and Absobtion Power of the Surfaces of the Coloured Plate

A colour test was carried out to determine the rates of absorption and emission of infrared radiation by coloured hollowed metallic plates which result in increase in temprature of the holllowed plates at maximum radiation of 750 Wm-2 at Abeokuta 7.198305 and Longitude 3.439533 during the month of March 2013. Five hollow metallic plates of different paint colours (black, green, red, blue and white) were exposed to sunlight simultaneously and the temperature generated in each plate was recorded using a data logger. A wooden box that was divided into five cavities was constructed and lagged with wood shavings to provide insulation and the five coloured hollowed metallic plates of dimension d=4h were inserted in it. The choice dimension d=4h is to minimise shading of the inside of the plate (d is the diameter of each of the plates and h is the height) the top of the plates were covered with a 5 mm thick glass. The top cover plates were securely laid tightly to both the wooden box and the tip of the plates to prevent heat loss to the surrounding and also from crossing from one plate to another.  This arraignment is similar to that of a flat plate collector and calorimeter experiment. The centre of each of the plate was connected to five probes of a data logger and the temperature of changes inside the plates are logged and recorded

DNA damage response at telomeres boosts the transcription of SARS-CoV-2 receptor ACE2 during aging

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causes the coronavirus disease 2019 (COVID-19), known to be more common in the elderly, who also show more severe symptoms and are at higher risk of hospitalization and death. Here, we show that the expression of the angiotensin converting enzyme 2 (ACE2), the SARS-CoV-2 cell receptor, increases during aging in mouse and human lungs. ACE2 expression increases upon telomere shortening or dysfunction in both cultured mammalian cells and in vivo in mice. This increase is controlled at the transcriptional level, and Ace2 promoter activity is DNA damage response (DDR)-dependent. Both pharmacological global DDR inhibition of ATM kinase activity and selective telomeric DDR inhibition by the use of antisense oligonucleotides prevent Ace2 upregulation following telomere damage in cultured cells and in mice. We propose that during aging telomere dysfunction due to telomeric shortening or damage triggers DDR activation and this causes the upregulation of ACE2, the SARS-CoV-2 cell receptor, thus contributing to make the elderly more susceptible to the infection

Sero-prevalence and risk factors for cytomegalovirus infection among pregnant women in a teaching hospital in Ogun state, Nigeria

Background: Infection with cytomegalo virus is usually asymptomatic however in pregnant women the risk of congenital infection and foetal  abnormalities makes antenatal screening for CMV infection necessary. The aim of this study was to determine the sero-prevalence and risk factors for  CMV infection among pregnant women in Babcock University Teaching Hospital (BUTH), Ilishan Remo, Ogun State, Nigeria.Methods: The study was a cross-sectional descriptive study conducted between January and May, 2017 on patients attending the antenatal clinic of  Babcock University Teaching Hospital. Enzyme Linked Immunosorbent Assay (ELISA) Kits were used to determine IgM and IgG anti CMV antibody titresinvenous blood samples obtained from study participants.Results: A total of 80 patients were recruited into the study. The mean age was 30 years.All (100%) respondents were sero-positive for anti CMV IgG  antibodies while 28.75% of respondents were seropositive for anti CMV IgM antibodies.Conclusion: There was a highsero-prevalence rate of CMV infection in the study. Screening of pregnant women for CMV infection is necessary due to the  risk of congenital infection and fetal defects