3,196 research outputs found
Recommended from our members
A comparative study of two methods for uncertainty analysis in power system state estimation
This letter presents a comparative study between twomethods
for estimating the uncertainty interval in power system state estimation.
Constrained nonlinear and linear formulations are proposed to estimate the
tightest possible upper and lower bounds on the states. The study compares
the performance of these methods in terms of estimating the bounds of the
uncertainty interval. In addition,an assessment of time performance for
both methods is carried out with varying measurement redundancy levels
Recommended from our members
Uncertainty modelling in power system state estimation
A method for uncertainty analysis in power system state estimation is proposed. The two-step method uses static weighted least-squares analysis to compute 'point' state estimates. Linear programming is then employed to obtain the upper and lower bounds of the uncertainty interval. It is shown that the method can provide useful additional information for both metered and nonmetered elements of the system. The effects of network parameter errors are also studied. For illustrative purposed, the proposed method is tested using the six-bus and IEEE 30-bus standard systems. Results show that the proposed method is an accurate and reliable tool for estimating the uncertainty bounds in power system state estimation
Solution of Different Types of Economic Load Dispatch Problems Using a Pattern Search Method
Direct search (DS) methods are evolutionary algorithms used to solve constrained optimization problems. DS methods do not require information about the gradient of the objective function when searching for an optimum solution. One such method is a pattern search (PS) algorithm. This study presents a new approach based on a constrained PS algorithm to solve various types of power system economic load dispatch (ELD) problems. These problems include economic dispatch with valve point (EDVP) effects, multi-area economic load dispatch (MAED), companied economic-environmental dispatch (CEED), and cubic cost function economic dispatch (QCFED). For illustrative purposes, the proposed PS technique has been applied to each of the above dispatch problems to validate its effectiveness. Furthermore, convergence characteristics and robustness of the proposed method has been assessed and investigated through comparison with results reported in literature. The outcome is very encouraging and suggests that PS methods may be very efficient when solving power system ELD problems
Application of pattern search method to power system valve-point economic load dispatch
Direct search (DS) methods are evolutionary algorithms used to solve constrained optimization problems. DS methods do not require any information about the gradient of the objective function at hand, while searching for an optimum solution. One of such methods is pattern search (PS) algorithm. This study presents a new approach based on a constrained pattern search algorithm to solve well-known power system economic load dispatch problem (ELD) with valve-point effect. For illustrative purposes, the proposed PS technique has been applied to various test systems to validate its effectiveness. Furthermore, convergence characteristics and robustness of the proposed method has been assessed and investigated through comparison with results reported in literature. The outcome is very encouraging and proves that pattern search (PS) is very applicable for solving power system economic load dispatch problem
Arcing High Impedance Fault Detection Using Real Coded Genetic Algorithm
Safety and reliability are two of the most important aspects of electric power supply systems. Sensitivity and robustness to detect and isolate faults can influence the safety and reliability of such systems. Overcurrent relays are generally used to protect the high voltage feeders in distribution systems. Downed conductors, tree branches touching conductors, and failing insulators often cause high-impedance faults in overhead distribution systems. The levels of currents of these faults are often much smaller than detection thresholds of traditional ground fault detection devices, thus reliable detection of these high impedance faults is a real challenge. With modern signal processing techniques, special hardware and software can be used to significantly improve the reliability of detection of certain types of faults. This paper presents a new method for detecting High Impedance Faults (HIF) in distribution systems using real coded genetic algorithm (RCGA) to analyse the harmonics and phase angles of the fault current signals. The method is used to discriminate HIFs by identifying specific events that happen when a HIF occurs
Recommended from our members
Matrix/fracture transfer function during counter-current spontaneous imbibition in naturally fractured reservoirs
Naturally fractured reservoirs are abundant in the earthâs crust and host a substantial percentage of oil reserves globally. The main mechanism of oil recovery during waterflooding of these types of reservoirs is through spontaneous imbibition of water into the matrix and simultaneous counter-current flow of oil out of the matrix. Understanding the predominate recovery mechanism enhances reserves estimates, accurate simulation forecasts and overall sound development plans. Dual-porosity and dual-permeability simulations are used in the industry to simulate waterfloods in naturally fractured reservoirs.
One of the key parameters in these simulations is the matrix-fracture transfer term, which is not well understood and modeled, especially in mixed-wet reservoirs. The same transfer term is used for primary, secondary and tertiary recovery processes, though it should change depending on the mechanisms of oil recovery. The key mechanism during primary recovery is depressurization, not spontaneous imbibition. The main goal of this research is to develop an accurate representation of the matrix-fracture transfer term in waterflooding for dual-porosity simulators.
The analytical and semi-analytical solutions for 1D counter-current imbibition were studied for defining the exact solution in fractured porous media. Fine-grid, single-porosity numerical solutions were developed that are consistent with the 1D analytical solutions, in conjunction with coarse-grid single-porosity conceptual models. Both single-porosity models are used as reference against dual-porosity conceptual models to address the built-in matrix-fracture transfer terms through recovery of the matrix element. The error in simulation was defined as the difference in recoveries between the fine-grid single-porosity solution and the dual-porosity solutions. A detailed investigation of both rock and fluid inputs affecting transfer terms in dual-porosity was made in an effort to match the transient solution obtained from fine-grid single-porosity models. The inclusion of transient effect in dual-porosity requires optimizing the following inputs which are shape factor, capillary exponent and oil relative permeability exponent. Two main processes were proposed for optimization. Firstly, an accuracy-based Latin Hyper Cube sampling method was utilized that converged to the solution quickly. Secondly, utilizing a machine learning algorithm (specifically an Artificial Neural Net model) that predicts recovery accuracy based on the aforementioned chosen inputs. The machine learning model needed many iterations to converge to a solution.Petroleum and Geosystems Engineerin
A hybrid GAâPSâSQP method to solve power system valve-point economic dispatch problems
This study presents a new approach based on a hybrid algorithm consisting of Genetic Algorithm (GA), Pattern Search (PS) and Sequential Quadratic Programming (SQP) techniques to solve the well-known power system Economic dispatch problem (ED). GA is the main optimizer of the algorithm, whereas PS and SQP are used to fine tune the results of GA to increase confidence in the solution. For illustrative purposes, the algorithm has been applied to various test systems to assess its effectiveness. Furthermore, convergence characteristics and robustness of the proposed method have been explored through comparison with results reported in literature. The outcome is very encouraging and suggests that the hybrid GAâPSâSQP algorithm is very efficient in solving power system economic dispatch problem
Malaysia attempts in reduce carbon dioxide (CO2) emission and sequestration in bio-concrete system; a future direction
In Malaysia, upbringing the production of mussel is one of the most second important aquaculture The greenhouse gasses increase in this century especially carbon dioxide (CO2) compare to the previous centuries due to the increase of anthropogenic activities in all countries around the world [1][2][3]. The high concentration CO2 in the atmospheric cause a catastrophic environmental issues such as; global warming, change in rainfall, rise of sea level and climatic changes.
- âŠ