Excitonic enhancement of nonradiative energy transfer to bulk silicon with the hybridization of cascaded quantum dots

Cataloged from PDF version of article.We report enhanced sensitization of silicon through nonradiative energy transfer (NRET) of the excitons in an energy-gradient structure composed of a cascaded bilayer of green-and red-emitting CdTe quantum dots (QDs) on bulk silicon. Here NRET dynamics were systematically investigated comparatively for the cascaded energy-gradient and mono-dispersed QD structures at room temperature. We show experimentally that NRET from the QD layer into silicon is enhanced by 40% in the case of an energy-gradient cascaded structure as compared to the mono-dispersed structures, which is in agreement with the theoretical analysis based on the excited state population-depopulation dynamics of the QDs. (C) 2013 AIP Publishing LLC

TiO2 assisted sensitivity enhancement in photosensitive nanocrystal skins

Solution-processable semiconductor nanocrystals (NCs) have been widely used to create novel devices for the photovoltaic, light-emission, light-detection and biosensing applications. They are good candidates especially to develope more efficient and novel optoelectronic devices owing to the high absorption cross-section, spectral tunability, deposition easiness and low cost properties. In recent years, NC integrated photodetectors have been developed to be used in large-area light-sensing applications [1]. These NC-based photodetectors have the ability to convert an optical signal to an electrical signal using the NCs as the optical absorbers. These low-cost devices were initially operated on the basis of charge collection, where an electric field imposed on the detector dissociates the photogenerated excitons into electrons and holes, in which an electric current is produced [2]. On the other hand, as an alternative device structure, we have recently developed the light-sensitive nanocrystal skin (LS-NS) [3]. These LS-NS platforms, which were fabricated over areas up to 48 cm2, are operated on the basis of photogenerated potential buildup, as opposed to conventional charge collection. In operation, close interaction of the monolayer NCs of the LS-NS with the top interfacing contact, while the bottom one is isolated using a high dielectric spacing layer, results in highly sensitive photosensing in the absence of external bias application. Furthermore, NC monolayer of the LS-NS makes the device semi-transparent with sufficient absorption, while reducing the noise generation and dark current. In our other recent work, we also reported that, by using a thick photoactive NC layer, a much lower photovoltage buildup was observed in the LS-NSs and it was attributed to the self-absorption effect [4]. In addition, we demonstrated the sensitivity increase in the LS-NSs via the absorption enhancement of NC film with the integration of plasmonic nanoparticles [5]. However, the localized plasmonic resonance band strongly limits the observed enhancement factor and the resultant operating wavelength range. Furthermore, in the absence of an external bias in the LS-NSs, each exciton tends to remain in the NC layer, where it was created, and recombine with the photogenerated holes that accumulate at the top interfacing contact, which causes also lower voltage buildup in the device. To overcome all these problems, in this study, we propose a thin TiO2 layer as the electron-accepting material and demonstrate the first account of electron transfer in NC-based light-sensitive skins, which leads to significant broadband sensitivity enhancement in the active device architecture. Here, we prove that favorable conduction band offset aids in transferring photogenerated electrons from a monolayer of NCs to an electron-accepting layer, which is ultimately useful for photosensing platforms and the next generation of light-sensing NC devices. © 2014 IEEE

Flexible and fragmentable tandem photosensitive nanocrystal skins

We proposed and demonstrated the first account of large-area, semi-transparent, tandem photosensitive nanocrystal skins (PNSs) constructed on flexible substrates operating on the principle of photogenerated potential buildup, which avoid the need for applying an external bias and circumvent the currentmatching limitation between junctions. We successfully fabricated and operated the tandem PNSs composed of single monolayers of colloidal water-soluble CdTe and CdHgTe nanocrystals (NCs) in adjacent junctions on a Kapton polymer tape. Owing to the usage of a single NC layer in each junction, noise generation was significantly reduced while keeping the resulting PNS films considerably transparent. In each junction, photogenerated excitons are dissociated at the interface of the semi-transparent Al electrode and the NC layer, with holes migrating to the contact electrode and electrons trapped in the NCs. As a result, the tandem PNSs lead to an open-circuit photovoltage buildup equal to the sum of those of the two single junctions, exhibiting a total voltage buildup of 128.4 mV at an excitation intensity of 75.8 μW cm⁻² at 350 nm. Furthermore, we showed that these flexible PNSs could be bent over 3.5 mm radius of curvature and cut out in arbitrary shapes without damaging the operation of individual parts and without introducing any significant loss in the total sensitivity. These findings indicate that the NC skins are promising as building blocks to make low-cost, flexible, large-area UV/visible sensing platforms with highly efficient full-spectrum conversion

Multiexciton generation assisted highly photosensitive CdHgTe nanocrystal skins

Multiexciton Generation (MEG) enabled by the photogeneration of more than one electron-hole pairs upon the absorption of a single photon observed in colloidal semiconductor nanocrystals (NCs) is an essential key to high efficiency when operating in large enough photon energy regimes. Here, we report a newly designed class of solution-processed highly sensitive MEG-assisted photosensors of CdHgTe NCs, in which the charge accumulation is dramatically enhanced for photon energies greater than two times the bandgap of the employed NCs. We fabricated and comparatively studied five types of devices based on different NC monolayers of selected quantum-confined bandgaps resulting in different levels of photovoltage buildup readouts. Among these photosensitive platforms, MEG is distinctly observed for CdHgTe NCs, as the number of electrons trapped inside these NCs and the number of holes accumulating into the interfacing metal electrode were increased beyond a single exciton per absorbed photon. Furthermore, we conducted time-resolved fluorescence measurements and confirmed the occurrence of MEG in the CdHgTe NC monolayer of the photosensor. These findings pave the way for engineering of multiexciton kinetics in high-efficiency NC-based photosensors and photovoltaics. © 2016 Elsevier Ltd

High-efficiency CdTe/CdS core/shell nanocrystals in water enabled by photo-induced colloidal hetero-epitaxy of CdS shelling at room temperature

We report high-efficiency CdTe/CdS core/shell nanocrystals synthesized in water by epitaxially growing CdS shells on aqueous CdTe cores at room temperature, enabled by the controlled release of S species under low-intensity ultraviolet (UV) light illumination. The resulting photo-induced dissociation of S2O32− ions conveniently triggers the formation of critical two-dimensional CdS epitaxy on the CdTe surface at room temperature, as opposed to initiating the growth of individual CdS core-only nanocrystals. This controlled colloidal hetero-epitaxy leads to a substantial increase in the photoluminescence (PL) quantum yield (QY) of the shelled nanocrystals in water (reaching 64%). With a systematic set of studies, the maximum PL QY is found to be almost independent of the illuminating UV intensity, while the shell formation kinetics required for reaching the maximum QY linearly depends on the illuminating UV intensity. A stability study of the QD films in air at various temperatures shows highly improved thermal stability of the shelled QDs (up to 120 °C in ambient air). These results indicate that the proposed aqueous CdTe/CdS core/shell nanocrystals hold great promise for applications requiring efficiency and stability. [Figure not available: see fulltext.] © 2015, Tsinghua University Press and Springer-Verlag Berlin Heidelberg

Development of bile duct bezoars following cholecystectomy caused by choledochoduodenal fistula formation: a case report

BACKGROUND: The formation of bile duct bezoars is a rare event. Its occurrence when there is no history of choledochoenteric anastomosis or duodenal diverticulum constitutes an extremely scarce finding. CASE PRESENTATION: We present a case of obstructive jaundice, caused by the concretion of enteric material (bezoars) in the common bile duct following choledochoduodenal fistula development. Six years after cholecystectomy, a 60-year-old female presented with abdominal pain and jaundice. Endoscopic retrograde cholangiopancreatography demonstrated multiple filling defects in her biliary tract. The size of the obstructing objects necessitated surgical retrieval of the stones. A histological assessment of the objects revealed fibrinoid materials with some cellular debris. Post-operative T-tube cholangiography (9 days after the operation) illustrated an open bile duct without any filling defects. Surprisingly, a relatively long choledochoduodenal fistula was detected. The fistula formation was assumed to have led to the development of the bile duct bezoar. CONCLUSION: Bezoar formation within the bile duct should be taken into consideration as a differential diagnosis, which can alter treatment modalities from surgery to less invasive methods such as more intra-ERCP efforts. Suspicions of the presence of bezoars are strengthened by the detection of a biliary enteric fistula through endoscopic retrograde cholangiopancreatography. Furthermore, patients at a higher risk of fistula formation should undergo a thorough ERCP in case there is a biliodigestive fistula having developed spontaneously

Probing the Thermal Deoxygenation of Graphene Oxide using High Resolution In Situ X-Ray based Spectroscopies

Despite the recent developments in Graphene Oxide due to its importance as a host precursor of Graphene, the detailed electronic structure and its evolution during the thermal reduction remain largely unknown, hindering its potential applications. We show that a combination of high resolution in situ X-ray photoemission and X-ray absorption spectroscopies offer a powerful approach to monitor the deoxygenation process and comprehensively evaluate the electronic structure of Graphene Oxide thin films at different stages of the thermal reduction process. It is established that the edge plane carboxyl groups are highly unstable, whereas carbonyl groups are more difficult to remove. The results consistently support the formation of phenol groups through reaction of basal plane epoxide groups with adjacent hydroxyl groups at moderate degrees of thermal activation (~400 {\deg}C). The phenol groups are predominant over carbonyl groups and survive even at a temperature of 1000 {\deg}C. For the first time a drastic increase in the density of states (DOS) near the Fermi level at 600 {\deg}C is observed, suggesting a progressive restoration of aromatic structure in the thermally reduced graphene oxideComment: Pagona Papakonstantinou as Corresponding author, E-mail: [email protected]

Stimulus responsive graphene scaffolds for tissue engineering

Tissue engineering (TE) is an emerging area that aims to repair damaged tissues and organs by combining different scaffold materials with living cells. Recently, scientists started to engineer a new generation of nanocomposite scaffolds able to mimic biochemical and biophysical mechanisms to modulate the cellular responses promoting the restoration of tissue structure or function. Due to its unique electrical, topographical and chemical properties, graphene is a material that holds a great potential for TE, being already considered as one of the best candidates for accelerating and guiding stem cell differentiations. Although this is a promising field there are still some challenges to overcome, such as the efficient control of the differentiation of the stem cells, especially in graphene-based microenvironments. Hence, this chapter will review the existing research related to the ability of graphene and its derivatives (graphene oxide and reduced graphene oxide) to induce stem cell differentiation into diverse lineages when under the influence of electrical, mechanical, optical and topographic stimulations