Study of the Direct Extrusion Behavior of Aluminum and Aluminum Alloy-2014 Using Conical Dies

The present work concerns with study of extrusion behavior of aluminum alloy-Al2014 comparing with pure aluminum-Al1050, using different die angles (á=15, 30 and 75°) and different billet lengths (20, 28, 40 and 52mm). Results showed that the extrusion load increase when billet length increases for aluminum alloy (Al-2014) and pure aluminum (Al-1050). The results also showed that small die angles required higher extrusion load than large die angles. The Brinell hardness values showed that aluminum alloy (Al-2014) undergoes higher work hardening due to the presence of copper compared with the pure aluminum (Al-1050), in addition to formation of dead metal zone which resists the metal flow through the die opening

First Case Report of Primary Testicular Diffuse Large B-Cell Lymphoma from the Western Region of Saudi Arabia

Primary testicular lymphoma (PTL) represents 1-2% of all types of non-Hodgkin lymphomas (NHLs) and 1-10% of testicular neoplasms. Up to the best of my knowledge, this is the first case of PTL of the diffuse large B-cell lymphoma (DLBCL) in a 60-year-old man presented with a painless mass in the left testis as revealed by physical examination in a tertiary care hospital in Al-Madinah Al-Munwarah in the western region of the Kingdom of Saudi Arabia (KSA). Radiological examination revealed a large well-defined heterogeneous predominantly hypo-echoic mass with increased vascularity in the upper portion of the testis. On the other hand, histopathological examination revealed a tumor involving the whole left testis, which was large (measuring 6 3.5  3.3 cm), solid and dark red with focal areas of hemorrhage and epididymal infiltration. Immunohistochemistry showed positivity of leucocyte common antigen (LCA), pan B-cell marker (CD20) and negativity of pan T-cell marker (CD3). Other immunohistochemical markers such as CD10, placental alkaline phosphatase (PLAP), cytokeratin, vimentin, desmin and S100 protein were also negative. However, there was a marked expression of Ki67 and Bcl2 markers. Accordingly, the diagnosis of DLBCL was established. The tumor was classified as stage I according to the Ann Arbor system. The case was treated by orchiectomy followed by prophylactic anthracycline-based chemotherapy and irradiation of the contralateral testis and central nervous system

Productivity, water use efficiency and soil properties of sugarcane as influenced by trash mulching and irrigation regimes under different planting systems in sandy loam soils

IntroductionIn the era of climate change, sugarcane used to face a problem associated with water shortage due to erratic rainfall patterns and lowered water tables. Improved water use efficiency using innovative crop management strategy is needed for sustainable sugarcane production. Trash mulching with different irrigation regimes can effectively modify the plant's hydrothermal micro-environment for increasing cane yield and water productivity.MethodsKeeping this in the background, a field experiment was conducted at Sugarcane Research Institute, RPCAU, Pusa, India, from 2016–17 to 2018–19 to investigate the effects of trash mulching and irrigation regimes on sugarcane productivity, water use efficiency (WUE) and soil properties in different planting systems. The field experiment comprised 12 treatments including four planting methods viz. conventional flat planting (CF; 75 cm row spacing) with trash mulching (6 t ha−1), CF planting (75 cm row spacing) without trash mulching (6 t ha−1), paired row trench (PT) planting (30: 120 cm row spacing) with trash mulching (6 t ha−1), PT planting (30: 120 cm row spacing) without trash mulching (6 t ha−1) and three irrigation schedules consisted of irrigation water (IW); cumulative pan evaporation (CPE) ratio of 0.60, 0.80, and 1.00 was laid out in strip plot design with three replications.Results and discussionThe cane yield (103.5 t ha−1) was found significantly higher in PT planting with trash mulching over the CF planting method with or without mulching. Concerning irrigation regimes using the IW/CPE ratio, it was found that the IW/CPE of 0.6 resulted in 16.9, 13.3% higher water-use efficiency, and 37.1, 40.7% higher water productivity over those under IW/CPE of 0.8, and 1.00, respectively. Furthermore, soil parameters like soil microbial biomass carbon (SMBC) and dehydrogenase activity were increased by 12.5, and 17.5 % due to trash mulching with trench planting as compared to those under conventional flat planting without mulching. The results suggest that planting sugarcane in paired rows and irrigation scheduling at 1.00 IW/CPE with the adoption of trash mulching practices is effective for increasing profitability by way of higher sugarcane productivity and water productivity and also in sustaining soil health

Clinicopathological Profile and Surgical Treatment of Abdominal Tuberculosis: A Single Centre Experience in Northwestern Tanzania.

Abdominal tuberculosis continues to be a major public health problem worldwide and poses diagnostic and therapeutic challenges to general surgeons practicing in resource-limited countries. This study was conducted to describe the clinicopathological profile and outcome of surgical treatment of abdominal tuberculosis in our setting and compare with what is described in literature. A prospective descriptive study of patients who presented with abdominal tuberculosis was conducted at Bugando Medical Centre (BMC) in northwestern Tanzania from January 2006 to February 2012. Ethical approval to conduct the study was obtained from relevant authorities. Statistical data analysis was performed using SPSS version 17.0. Out of 256 patients enrolled in the study, males outnumbered females. The median age was 28 years (range = 16-68 years). The majority of patients (77.3%) had primary abdominal tuberculosis. A total of 127 (49.6%) patients presented with intestinal obstruction, 106 (41.4%) with peritonitis, 17 (6.6%) with abdominal masses and 6 (2.3%) patients with multiple fistulae in ano. Forty-eight (18.8%) patients were HIV positive. A total of 212 (82.8%) patients underwent surgical treatment for abdominal tuberculosis. Bands /adhesions (58.5%) were the most common operative findings. Ileo-caecal region was the most common bowel involved in 122 (57.5%) patients. Release of adhesions and bands was the most frequent surgical procedure performed in 58.5% of cases. Complication and mortality rates were 29.7% and 18.8% respectively. The overall median length of hospital stay was 32 days and was significantly longer in patients with complications (p < 0.001). Advanced age (age ≥ 65 years), co-morbid illness, late presentation, HIV positivity and CD4+ count < 200 cells/μl were statistically significantly associated with mortality (p < 0.0001). The follow up of patients were generally poor as only 37.5% of patients were available for follow up at twelve months after discharge. Abdominal tuberculosis constitutes a major public health problem in our environment and presents a diagnostic challenge requiring a high index of clinical suspicion. Early diagnosis, early anti-tuberculous therapy and surgical treatment of the associated complications are essential for survival

VirSorter2: a multi-classifier, expert-guided approach to detect diverse DNA and RNA viruses

Background Viruses are a significant player in many biosphere and human ecosystems, but most signals remain “hidden” in metagenomic/metatranscriptomic sequence datasets due to the lack of universal gene markers, database representatives, and insufficiently advanced identification tools. Results Here, we introduce VirSorter2, a DNA and RNA virus identification tool that leverages genome-informed database advances across a collection of customized automatic classifiers to improve the accuracy and range of virus sequence detection. When benchmarked against genomes from both isolated and uncultivated viruses, VirSorter2 uniquely performed consistently with high accuracy (F1-score > 0.8) across viral diversity, while all other tools under-detected viruses outside of the group most represented in reference databases (i.e., those in the order Caudovirales). Among the tools evaluated, VirSorter2 was also uniquely able to minimize errors associated with atypical cellular sequences including eukaryotic genomes and plasmids. Finally, as the virosphere exploration unravels novel viral sequences, VirSorter2’s modular design makes it inherently able to expand to new types of viruses via the design of new classifiers to maintain maximal sensitivity and specificity. Conclusion With multi-classifier and modular design, VirSorter2 demonstrates higher overall accuracy across major viral groups and will advance our knowledge of virus evolution, diversity, and virus-microbe interaction in various ecosystems. Source code of VirSorter2 is freely available ( https://bitbucket.org/MAVERICLab/virsorter2 ), and VirSorter2 is also available both on bioconda and as an iVirus app on CyVerse ( https://de.cyverse.org/de ). Video abstrac

Highly-parallelized simulation of a pixelated LArTPC on a GPU

The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on 103 pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype