Tailoring AA6063 for improving antibacterial properties

Aluminium alloy 6063 was subjected to two different surface treatments: anodizing in sulphuric acid (SA) and the deposition of cerium conversion coatings (CeCC), in order to evaluate the antibacterial properties of the new surfaces. The microstructure and composition of the anodized samples and the cerium conversion coatings were characterized by scanning electron microscopy, energy dispersive spectrometry (SEM/EDS) and X-ray Photoemission Spectroscopy (XPS). Roughness and wettability were measured for all new surfaces. Bacterial adherence studies were carried out using Pseudomonas aeruginosa, with promising results for the anodized sample

Modeling the variability of Au/ Ti/h BN/Au memris t ive devices

The variability of memristive devices using multilayer hexagonal boron nitride (h-BN) coupled with Ti and Au electrodes (i.e., Au/Ti/h-BN/Au) is analyzed in depth using different numerical techniques. We extract the reset voltage using three different methods, quantified its cycle-to-cycle variability, calculated the charge and flux that allows to minimize the effects of electric noise and the inherent stochasticity of resistive switching, described the device variability using time series analyses to assess the “memory” effect, and employed a circuit breaker simulator to understand the formation and rupture of the percolation paths that produce the switching. We conclude that the cycle-to-cycle variability of the Au/Ti/h-BN/Au devices presented here is higher than that previously observed in Au/h-BN/Au devices, and hence they may be useful for data encryption.Ministry of Science and Technology of China (2019YFE0124200, 2018YFE0100800)National Natural Science Foundation of China (61874075)Consejería de Conocimiento, Investigación y Universidad, Junta de Andalucía (Spain) and European Regional Development Fund (ERDF) under projects A-TIC-117-UGR18, A-FQM-66-UGR20, A-FQM-345- UGR18, B-TIC-624-UGR20 and IE2017-5414Grant PGC2018-098860-B-I00 supported by MCIU/AEI/FEDERMaria de Maeztu” Excellence Unit IMAG, reference CEX2020-001105-M, funded by MCIN/AEI/10.13039/501100011033King Abdullah University of Science and Technolog

Positron Emission Tomography-Computed Tomography and Magnetic Resonance Imaging Assessments in a Mouse Model of Implant-Related Bone and Joint Staphylococcus aureus Infection.

Osteomyelitis is an infection of the bone, associated with an inflammatory process. Imaging plays an important role in establishing the diagnosis and the most appropriate patient management. However, data are lacking regarding the use of preclinical molecular imaging techniques to assess osteomyelitis progression in experimental models. This study aimed to compare structural and molecular imaging to assess disease progression in a mouse model of implant-related bone and joint infections caused by Staphylococcus aureus. In SWISS mice, the right femur was implanted with a resorbable filament impregnated with S. aureus (infected group, n = 10) or sterile culture medium (uninfected group, n = 6). Eight animals (5 infected, 3 uninfected) were analyzed with magnetic resonance imaging (MRI) at 1, 2, and 3 weeks postintervention, and 8 mice were analyzed with [18F]fluorodeoxyglucose (FDG)-positron emission tomography (PET)-computed tomography (CT) at 48 h and at 1, 2, and 3 weeks postintervention. In infected animals, CT showed bone lesion progression, mainly in the distal epiphysis, although some uninfected animals presented evident bone sequestra at 3 weeks. MRI showed a lesion in the articular area that persisted for 3 weeks in infected animals. This lesion was smaller and less evident in the uninfected group. At 48 h postintervention, FDG-PET showed higher joint uptake in the infected group than in the uninfected group (P = 0.025). Over time, the difference between groups increased. These results indicate that FDG-PET imaging was much more sensitive than MRI and CT for differentiating between infection and inflammation at early stages. FDG-PET clearly distinguished between infection and postsurgical bone healing (in uninfected animals) from 48 h to 3 weeks after implantation. IMPORTANCE Our results encourage future investigations on the utility of the model for testing different therapeutic procedures for osteomyelitis.We thank Yolanda Sierra, Alexandra de Francisco, and María de la Jara Felipe, from the Imaging Laboratory for Small Animals of the Instituto de Investigación Sanitaria, Gregorio Marañón, for their excellent work with animal preparation and imaging protocols. Additionally, we thank Daniel Calle, from the Advanced Imaging Unit of CNIC, for his help in imaging postprocessing. This study was partially supported by the Instituto de Salud Carlos III (grants PI20/ 01632 and PT20/00044), cofunded by the European Regional Development Fund (ERDF), A way to make Europe. This work was also supported by the Diagnosis and Treatment Follow-up of Severe Staphylococcal Infections with Anti-Staphylococcal Antibodies and Immune-PET project of the Grant Fundación BBVA a Equipos de Investigación Científica 2018, by the Fundación Ramón Areces, and by Comunidad de Madrid (S2022/BMD-7403 RENIM-CM). The CNIC is supported by the Instituto de Salud Carlos III (ISCIII), the Ministerio de Ciencia e Innovación (MCIN), and the Pro CNIC Foundation, and it is a Severo Ochoa Center of Excellence (grant CEX2020-001041-S, funded by MICIN/AEI/10.13039/501100011033).S

Reduction of methicillin-resistant Staphylococcus aureus biofilm growth and development using arctic berry extracts

IntroductionSurgical site infection remains a devastating and feared complication of surgery caused mainly by Staphylococcus aureus (S. aureus). More specifically, methicillin-resistant S. aureus (MRSA) infection poses a serious threat to global health. Therefore, developing new antibacterial agents to address drug resistance are urgently needed. Compounds derived from natural berries have shown a strong antimicrobial potential.MethodsThis study aimed to evaluate the effect of various extracts from two arctic berries, cloudberry (Rubus chamaemorus) and raspberry (Rubus idaeus), on the development of an MRSA biofilm and as treatment on a mature MRSA biofilm. Furthermore, we evaluated the ability of two cloudberry seed-coat fractions, hydrothermal extract and ethanol extract, and the wet-milled hydrothermal extract of a raspberry press cake to inhibit and treat biofilm development in a wound-like medium. To do so, we used a model strain and two clinical strains isolated from infected patients.ResultsAll berry extracts prevented biofilm development of the three MRSA strains, except the raspberry press cake hydrothermal extract, which produced a diminished anti-staphylococcal effect.DiscussionThe studied arctic berry extracts can be used as a treatment for a mature MRSA biofilm, however some limitations in their use exist

Sanguiin H-6 Fractionated from Cloudberry (Rubus chamaemorus) Seeds Can Prevent the Methicillin-Resistant Staphylococcus aureus Biofilm Development during Wound Infection

Staphylococcus aureus is the most common cause of surgical site infections and its treatment is challenging due to the emergence of multi-drug resistant strains such as methicillin-resistant S. aureus (MRSA). Natural berry-derived compounds have shown antimicrobial potential, e.g., ellagitannins such as sanguiin H-6 and lambertianin C, the main phenolic compounds in Rubus seeds, have shown antimicrobial activity. The aim of this study was to evaluate the effect of sanguiin H-6 and lambertianin C fractionated from cloudberry seeds, on the MRSA growth, and as treatment of a MRSA biofilm development in different growth media in vitro and in vivo by using a murine wound infection model where sanguiin H-6 and lambertianin C were used to prevent the MRSA infection. Sanguiin H-6 and lambertianin C inhibited the in vitro biofilm development and growth of MRSA. Furthermore, sanguiin H-6 showed significant anti-MRSA effect in the in vivo wound model. Our study shows the possible use of sanguiin H-6 as a preventive measure in surgical sites to avoid postoperative infections, whilst lambertianin C showed no anti-MRSA activity

Sanguiin H-6 Fractionated from Cloudberry (Rubus chamaemorus) Seeds Can Prevent the Methicillin-Resistant Staphylococcus aureus Biofilm Development during Wound Infection

Staphylococcus aureus is the most common cause of surgical site infections and its treatment is challenging due to the emergence of multi-drug resistant strains such as methicillin-resistant S. aureus (MRSA). Natural berry-derived compounds have shown antimicrobial potential, e.g., ellagitannins such as sanguiin H-6 and lambertianin C, the main phenolic compounds in Rubus seeds, have shown antimicrobial activity. The aim of this study was to evaluate the effect of sanguiin H-6 and lambertianin C fractionated from cloudberry seeds, on the MRSA growth, and as treatment of a MRSA biofilm development in different growth media in vitro and in vivo by using a murine wound infection model where sanguiin H-6 and lambertianin C were used to prevent the MRSA infection. Sanguiin H-6 and lambertianin C inhibited the in vitro biofilm development and growth of MRSA. Furthermore, sanguiin H-6 showed significant anti-MRSA effect in the in vivo wound model. Our study shows the possible use of sanguiin H-6 as a preventive measure in surgical sites to avoid postoperative infections, whilst lambertianin C showed no anti-MRSA activity

Antibiotic delivery from bone-targeted mesoporous silica nanoparticles for the treatment of osteomyelitis caused by methicillin-resistant Staphylococcus aureus

Osteomyelitis is a hard-to-treat infection of the bone and bone marrow that is mainly caused by Staphylococcus aureus, with an increasing incidence of methicillin-resistant S. aureus (MRSA). Owing to the aggressiveness of these bacteria in colonizing and destroying the bone, systemic antibiotic treatments fail to eradicate the infection. Instead, it normally entails surgery to remove the dead or infected bone. In this work, we report bone-targeted mesoporous silica nanoparticles for the treatment of osteomyelitis. The nanoparticles have been engineered with a functional gelatine/colistin coating able to hamper premature release from the mesopores while effectively disaggregating the bacterial biofilm. Because antibiotic resistance is a global emergency, we have designed two sets of identical nanoparticles, carrying each of them a clinically relevant antibiotic, that have demonstrated to have synergistic effect. The bone-targeted nanoparticles have been thoroughly evaluated in vitro and in vivo, obtaining a notable reduction of the amount of bacteria in the bone in just 24 h after only one dose, and paving the way for localized, nanoparticle-mediated treatment of MRSA-caused osteomyelitis. Statement of significance In this work, we propose the use of bone-targeted mesoporous silica nanoparticles to address S. aureus-caused osteomyelitis that render synergistic therapeutic effect via multidrug delivery. Because the bacterial biofilm is responsible for an aggressive surgical approach and prolonged antibiotic treatment, the nanoparticles have been functionalized with a functional coating able to both disaggregate the biofilm, hamper premature antibiotic release and protect the intact bone. These engineered nanoparticles are able to effectively target bone tissue both in vitro and in vivo, showing high biocompatibility and elevated antibacterial effect

Synthesis, characterization, and antibacterial activities of a heteroscorpionate derivative platinum complex against methicillin-resistant Staphylococcus aureus

Staphylococcus aureus is one of the species with the greatest clinical importance and greatest impact on public health. In fact, methicillin-resistant S. aureus (MRSA) is considered a pandemic pathogen, being essential to develop effective medicines and combat its rapid spread. This study aimed to foster the translation of clinical research outcomes based on metallodrugs into clinical practice for the treatment of MRSA. Bearing in mind the promising anti-Gram-positive effect of the heteroscorpionate ligand 1,1’-(2-(4-isopropylphenyl)ethane-1,1-diyl)bis(3,5-dimethyl-1H-pyrazole) (2P), we propose the coordination of this compound to platinum as a clinical strategy with the ultimate aim of overcoming resistance in the treatment of MRSA. Therefore, the novel metallodrug 2P-Pt were synthetized, fully characterized and its antibacterial effect against the planktonic and biofilm state of S. aureus evaluated. In this sense, three different strains of S. aureus were studied, one collection strain of S. aureus sensitive to methicillin and two clinical MRSA strains. To appraise the antibacterial activity, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), minimum biofilm inhibitory concentration (MBIC), and minimum biofilm eradication concentration (MBEC) were determined. Moreover, successful outcomes on the development of biofilm in a wound-like medium were obtained. The mechanism of action for 2P-Pt was proposed by measuring the MIC and MBC with EDTA (cation mediated mechanism) and DMSO (exogenous oxidative stress mechanism). Moreover, to shed light on the plausible antistaphylococcal mechanism of this novel platinum agent, additional experiments using transmission electron microscopy were carried out. 2P-Pt inhibited the growth and eradicated the three strains evaluated in the planktonic state. Another point worth stressing is the inhibition in the growth of MRSA biofilm even in a wounded medium. The results of this work support this novel agent as a promising therapeutic alternative for preventing infections caused by MRSA

Perturbative computation of string one-loop corrections to Wilson loop minimal surfaces in AdS(5) x S-5

We revisit the computation of the 1-loop string correction to the “latitude” minimal surface in AdS 5 × S 5 representing 1/4 BPS Wilson loop in planar N=4 SYM theory previously addressed in arXiv:1512.00841 and arXiv:1601.04708. We resolve the problem of matching with the subleading term in the strong coupling expansion of the exact gauge theory result (derived previously from localization) using a different method to compute determinants of 2d string fluctuation operators. We apply perturbation theory in a small parameter (angle of the latitude) corresponding to an expansion near the AdS 2 minimal surface representing 1/2 BPS circular Wilson loop. This allows us to compute the corrections to the heat kernels and zeta-functions of the operators in terms of the known heat kernels on AdS 2. We apply the same method also to two other examples of Wilson loop surfaces: generalized cusp and k-wound circle