A pattern reconfigurable U-slot antenna and its applications in MIMO systems

A new compact pattern reconfigurable U-slot antenna is presented. The antenna consists of a U-slot patch and eight shorting posts. Each edge of the square patch is connected to two shorting posts via PIN diodes. By switching between the different states of the PIN diodes, the proposed antenna can operate in either monopolar patch or normal patch mode in similar frequency ranges. Therefore, its radiation pattern can be switched between conical and boresight patterns electrically. In addition, the plane with the maximum power level of the conical pattern can be changed between two orthogonal planes. Owing to a novel design of the switch geometry, the antenna does not need dc bias lines. The measured overlapping impedance bandwidth of the two modes is 6.6% with a center (S/ 11/<frequency of 5.32 GHz. The measured radiation patterns agree well with simulated results. The antennas are incorporated in a 2×2 multiple-input-multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) system to demonstrate the improvement in system capacity. In the real-time MIMO-OFDM channel measurement, it is shown that compared to omnidirectional antennas, the pattern reconfigurable antennas can enhance the system capacity, with 17% improvement in a line-of-sight (LOS) scenario and 12% in a non-LOS (NLOS) scenario at a signal-to-noise ratio (SNR) of 10 dB. © 2011 IEEE

Understanding different types of consumers: A multi-group analysis based on convenience food-related lifestyle

The primary objective of this study is to identify categories of organic food consumers based on the CFL (convenience food related lifestyle). Secondarily, this study explores characteristics, motivations/barriers in consumption and perception regarding to self-focus perception (such as perceived consequence of purchasing organic food) and altruistic behaviour (such as recycling behavior and perception of transportation) in different CFL. 1,262 valid samples are collected in this study. Moderate, convenience-pursuing and quality-pursuing categories are separated by cluster analysis. Consumer attitudes toward ready-made meals and takeaway meal solutions, perceived consequences of purchasing organic food, purchase frequency and quantity are differential, and the influence of organic food purchasing perception of consequence on altruistic behaviour are differences in CFL. Only consumers who purchase organic food motivated by environmental concerns are able to improve their recycling behavior. This study believes that the CFL framework has enhanced the understanding of consumer buying behavior and characteristics

Structural basis for oligomerization and glycosaminoglycan binding of CCL5 and CCL3.

CC chemokine ligand 5 (CCL5) and CCL3 are critical for immune surveillance and inflammation. Consequently, they are linked to the pathogenesis of many inflammatory conditions and are therapeutic targets. Oligomerization and glycosaminoglycan (GAG) binding of CCL5 and CCL3 are vital for the functions of these chemokines. Our structural and biophysical analyses of human CCL5 reveal that CCL5 oligomerization is a polymerization process in which CCL5 forms rod-shaped, double-helical oligomers. This CCL5 structure explains mutational data and offers a unified mechanism for CCL3, CCL4, and CCL5 assembly into high-molecular-weight, polydisperse oligomers. A conserved, positively charged BBXB motif is key for the binding of CC chemokines to GAG. However, this motif is partially buried when CCL3, CCL4, and CCL5 are oligomerized; thus, the mechanism by which GAG binds these chemokine oligomers has been elusive. Our structures of GAG-bound CCL5 and CCL3 oligomers reveal that these chemokine oligomers have distinct GAG-binding mechanisms. The CCL5 oligomer uses another positively charged and fully exposed motif, KKWVR, in GAG binding. However, residues from two partially buried BBXB motifs along with other residues combine to form a GAG-binding groove in the CCL3 oligomer. The N termini of CC chemokines are shown to be involved in receptor binding and oligomerization. We also report an alternative CCL3 oligomer structure that reveals how conformational changes in CCL3 N termini profoundly alter its surface properties and dimer-dimer interactions to affect GAG binding and oligomerization. Such complexity in oligomerization and GAG binding enables intricate, physiologically relevant regulation of CC chemokine functions

Transcriptomic, proteomic and metabolic changes in Arabidopsis thaliana leaves after the onset of illumination

BACKGROUND: Light plays an important role in plant growth and development. In this study, the impact of light on physiology of 20-d-old Arabidopsis leaves was examined through transcriptomic, proteomic and metabolomic analysis. Since the energy-generating electron transport chains in chloroplasts and mitochondria are encoded by both nuclear and organellar genomes, sequencing total RNA after removal of ribosomal RNAs provides essential information on transcription of organellar genomes. The changes in the levels of ADP, ATP, NADP(+), NADPH and 41 metabolites upon illumination were also quantified. RESULTS: Upon illumination, while the transcription of the genes encoded by the plastid genome did not change significantly, the transcription of nuclear genes encoding different functional complexes in the photosystem are differentially regulated whereas members of the same complex are co-regulated with each other. The abundance of mRNAs and proteins encoded by all three genomes are, however, not always positively correlated. One such example is the negative correlation between mRNA and protein abundances of the photosystem components, which reflects the importance of post-transcriptional regulation in plant physiology. CONCLUSION: This study provides systems-wide datasets which allow plant researchers to examine the changes in leaf transcriptomes, proteomes and key metabolites upon illumination and to determine whether there are any correlations between changes in transcript and protein abundances of a particular gene or pathway upon illumination. The integration of data of the organelles and the photosystems, Calvin-Benson cycle, carbohydrate metabolism, glycolysis, the tricarboxylic acid cycle and respiratory chain, thereby provides a more complete picture to the changes in plant physiology upon illumination than has been attained to date.published_or_final_versio

Inverse analysis of critical current density in a bulk high-temperature superconducting undulator

In order to optimise the design of undulators using high-temperature superconductor (HTS) bulks we have developed a method to estimate the critical current density (Jc) of each bulk from the overall measured magnetic field of an undulator. The vertical magnetic field was measured along the electron-beam axis in a HTS bulk-based undulator consisting of twenty Gd-Ba-Cu-O (GdBCO) bulks inserted in a 12-T solenoid. The Jc values of the bulks were estimated by an inverse analysis approach in which the magnetic field was calculated by the forward simulation of the shielding currents in each HTS bulk with a given Jc. Subsequently the Jc values were iteratively updated using the pre-calculated response matrix of the undulator magnetic field to Jc. We demonstrate that it is possible to determine the Jc of each HTS bulk with sufficient accuracy for practical application within around 10 iterations. The pre-calculated response matrix, created in advance, enables the inverse analysis to be performed within a practically short time, on the order of several hours. The measurement error, which destroys the uniqueness of the solution, was investigated and the points to be noted for future magnetic field measurements were clarified. The results show that this inverse-analysis method allows the estimation of the Jc of each bulk comprising an HTS bulk undulator.CHART (Swiss Accelerator Research and Technology Collaboration); EPSRC Early Career Fellowship, EP/P020313/

Electric Field Effects on Graphene Materials

Understanding the effect of electric fields on the physical and chemical properties of two-dimensional (2D) nanostructures is instrumental in the design of novel electronic and optoelectronic devices. Several of those properties are characterized in terms of the dielectric constant which play an important role on capacitance, conductivity, screening, dielectric losses and refractive index. Here we review our recent theoretical studies using density functional calculations including van der Waals interactions on two types of layered materials of similar two-dimensional molecular geometry but remarkably different electronic structures, that is, graphene and molybdenum disulphide (MoS$_2$). We focus on such two-dimensional crystals because of they complementary physical and chemical properties, and the appealing interest to incorporate them in the next generation of electronic and optoelectronic devices. We predict that the effective dielectric constant ($\varepsilon$) of few-layer graphene and MoS$_2$ is tunable by external electric fields ($E_{\rm ext}$). We show that at low fields ($E_{\rm ext}^{}<0.01$ V/\AA) $\varepsilon$ assumes a nearly constant value $\sim$4 for both materials, but increases at higher fields to values that depend on the layer thickness. The thicker the structure the stronger is the modulation of $\varepsilon$ with the electric field. Increasing of the external field perpendicular to the layer surface above a critical value can drive the systems to an unstable state where the layers are weakly coupled and can be easily separated. The observed dependence of $\varepsilon$ on the external field is due to charge polarization driven by the bias, which show several similar characteristics despite of the layer considered.Comment: Invited book chapter on Exotic Properties of Carbon Nanomatter: Advances in Physics and Chemistry, Springer Series on Carbon Materials. Editors: Mihai V. Putz and Ottorino Ori (11 pages, 4 figures, 30 references

Understanding the nature of "superhard graphite"

Numerous experiments showed that on cold compression graphite transforms into a new superhard and transparent allotrope. Several structures with different topologies have been proposed for this phase. While experimental data are consistent with these models, the only way to solve this puzzle is to find which structure is kinetically easiest to form. Using state-of-the-art molecular-dynamics transition path sampling simulations, we investigate kinetic pathways of the pressure-induced transformation of graphite to various superhard candidate structures. Unlike hitherto applied methods for elucidating nature of superhard graphite, transition path sampling realistically models nucleation events necessary for physically meaningful transformation kinetics. We demonstrate that nucleation mechanism and kinetics lead to $M$-carbon as the final product. $W$-carbon, initially competitor to $M$-carbon, is ruled out by phase growth. Bct-C$_4$ structure is not expected to be produced by cold compression due to less probable nucleation and higher barrier of formation

Exploring multiple drivers of cooperative governance: a paired case comparison of vegetable growing cooperatives in the UK and China

This is the final version. Available on open access from Wageningen Academic Publishers via the DOI in this record. Farmers’ collective action via cooperatives is critical to achieving a wide range of economic and social benefits that lead to sustainable development and enhance the welfare of rural communities. Adopting a qualitative case study method, the paper compares the development and governance attributes of two cooperatives and seeks to identify how non-economic conditions explain their differences. The cases are selected from the United Kingdom and China, representing different cultural and legislation contexts, to explore the role of culture and legislation in formulating the governance of farmer cooperatives. The results demonstrate that: (1) the formation of member groups due to considerable member heterogeneity may lead to the skewed allocation of control rights and income rights; (2) legislation play an important role in formulating the governance of cooperatives; and (3) national culture potentially has influence on cooperative governance, but direct evidence is in insufficient.National Planning Office of Philosophy and Social ScienceBritish Academ

Conceptualising the Global Forest Response to Liana Proliferation

Lianas are woody vines, rooted in the soil, and supported physically by trees. Lianas contribute to forest ecosystem functioning globally, but especially in the tropics and subtropics. However, prolific liana growth following heavy disturbance frequently affects subsequent recovery of forest tree diversity, biomass, structure, and function. Understanding this forest liana dynamic, and its sensitivity to climate and anthropogenic forces, is essential for worldwide forest restoration and climate change mitigation. Here, we synthesise the evidence for both positive and negative effects of lianas on forests and propose a framework that outlines the expected global response of forests to disturbance-induced liana proliferation. Emerging evidence suggests that lianas play a major role in both facilitating and delaying forest recovery following disturbance. At low levels of disturbance and/or where environmental conditions favour tree growth, lianas can facilitate forest recovery by protecting trees from extreme weather, fire, weed invasion and herbivory. However, under conditions where lianas proliferate beyond critical thresholds, positive feedbacks are expected to induce and sustain liana-dominated forest states that can endure for decades or even longer. We conceptualise alternative classes of forest recovery response to disturbance and describe measurement and modelling of liana thresholds.We identify four essential challenges for global change science relating to lianas: (1) incorporation of lianas and sapling stems into forest monitoring and tree stand measurements worldwide; (2) long-term experiments to determine variation in liana-tree competition, and potential drivers across forest successional gradients; (3) identification and prediction of liana thresholds and other alternative forest recovery response classes; and (4) dynamicmechanisticmodelling of forest recovery to determine regional and global variation within and among different recovery response classes, in relation to variation in potential drivers, liana feedbacks and their interactions. Addressing these challenges will determine the importance of lianas in shaping regional and global forest composition, recovery and dynamics

Fatigue evaluation in maintenance and assembly operations by digital human simulation

Virtual human techniques have been used a lot in industrial design in order to consider human factors and ergonomics as early as possible. The physical status (the physical capacity of virtual human) has been mostly treated as invariable in the current available human simulation tools, while indeed the physical capacity varies along time in an operation and the change of the physical capacity depends on the history of the work as well. Virtual Human Status is proposed in this paper in order to assess the difficulty of manual handling operations, especially from the physical perspective. The decrease of the physical capacity before and after an operation is used as an index to indicate the work difficulty. The reduction of physical strength is simulated in a theoretical approach on the basis of a fatigue model in which fatigue resistances of different muscle groups were regressed from 24 existing maximum endurance time (MET) models. A framework based on digital human modeling technique is established to realize the comparison of physical status. An assembly case in airplane assembly is simulated and analyzed under the framework. The endurance time and the decrease of the joint moment strengths are simulated. The experimental result in simulated operations under laboratory conditions confirms the feasibility of the theoretical approach