The marine algae of Tasmania

A classified list of the algae which have been recorded from Tasmania and the adjacent islands. This Record is based on the labours of many workers. Probably the first Tasmanian seaweed to receive a scientific name was the largest, though not the longest, of them all, the giant kelp, Sarcophycus potatorum, gathered during the survey of the Huon River and D'Entrecasteaux Channel made by the Recherche and the Esperance in 1792-3. The specific name was given to it by the French botanist Labillardiere, who observed that the natives of Tasmania "used portions of its great leaves folded into the form of "a pouch, for the purpose of keeping fresh water.

Performance evaluation of a feature-preserving filtering algorithm for removing additive random noise in digital images

We evaluate the performance of a feature-preserving filtering algorithm over a range of images corrupted by typical additive random noise against three common spatial filter algorithms: median, sigma and averaging. The concept of the new algorithm is based on a corrupted-pixel identification methodology over a variable subimage size. Rather than processing every pixel indiscriminately in a digital image, this corrupted-pixel identification algorithm interrogates the image in variable-sized subimage regions to determine which are the corrupted pixels and which are not. As a result, only the corrupted pixels are being filtered, whereas the uncorrupted pixels are untouched. Extensive evaluation of the algorithm over a large number of noisy images shows that the corrupted-pixel identification algorithm exhibits three major characteristics. First, its ability in removing additive random noise is better visually (subjective) and has the smallest mean-square errors (objective) in all cases compared with the median filter, averaging filter and sigma filter. Second, the effect of smoothing introduced by the new filter is minimal. In other words, most edge and line sharpness is preserved. Third, the corrupted-pixel identification algorithm is consistently faster than the median and sigma filters in all our test cases. © 1996 Society of Photo-Optical Instrumentation Engineers.published_or_final_versio

Lane detection by orientation and length discrimination

This paper describes a novel lane detection algorithm for visual traffic surveillance applications under the auspice of intelligent transportation systems. Traditional lane detection methods for vehicle navigation typically use spatial masks to isolate instantaneous lane information from on-vehicle camera images. When surveillance is concerned, complete lane and multiple lane information is essential for tracking vehicles and monitoring lane change frequency from overhead cameras, where traditional methods become inadequate. The algorithm presented in this paper extracts complete multiple lane information by utilizing prominent orientation and length features of lane markings and curb structures to discriminate against other minor features. Essentially, edges are first extracted from the background of a traffic sequence, then thinned and approximated by straight lines. From the resulting set of straight lines, orientation and length discriminations are carried out three-dimensionally with the aid of two-dimensional (2-D) to three-dimensional (3-D) coordinate transformation and K-means clustering. By doing so, edges with strong orientation and length affinity are retained and clustered, while short and isolated edges are eliminated. Overall, the merits of this algorithm are as follows. First, it works well under practical visual surveillance conditions. Second, using K-means for clustering offers a robust approach. Third, the algorithm is efficient as it only requires one image frame to determine the road center lines. Fourth, it computes multiple lane information simultaneously. Fifth, the center lines determined are accurate enough for the intended application.published_or_final_versio

A comprehensive lightweight inter-domain procedure call mechanism for concurrent computations

Many inter-domain procedure calls (IDPCs) have been developed to provide fast communication services between protection domains. Different techniques have been employed to trade protection for performance. However, few studies have been made to discuss issues for constructing a comprehensive and generally usable IDPC facility. In this paper, we evaluate the tradeoff between protection and performance in a IDPC facility, and introduce a new IDPC mechanism which shows its merits by achieving comprehensiveness with secure protection and a performance that is comparable with some well-known mechanisms.published_or_final_versio

Impact of regulated deficit irrigation on the physiological characteristics of two rapeseed varieties as affected by different potassium rates

A field trial was conducted at experimental field of Qazvin region, Iran (36° 18´ N and 49° 57´ E) in 2008/2009 and 2009/2010 growing seasons to determine the physiological properties of rapeseed varieties (Zarfam and Opera) subjected to drought stress condition under different potassium sulphate levels. The trial was laid out in a factorial experiment based on a randomized complete block design with three replications. Irrigation regimes included I1, irrigation after 40% (control); I2, irrigation after 60% and I3, irrigation after 80% soil water depletion (SWD). However, the applied potassium rates were K1, non-application, K2, 100 kg ha-1 and K3, 200 kg ha-1 of K2SO4. Physiological indices including relative water content (RWC), stomatal resistance (RS), canopy temperature (Tc), and the difference between canopy and air temperature (ΔT) were measured at three stages. Both varieties regarding physiological indices in all sampling stages showed a significant difference. Higher relative water content (RWC) and lower stomatal resistance (RS) and canopy temperature (Tc) in Opera variety under limited moisture condition indicated its salient drought tolerant over Zarfam variety. Results show that with increasing stress severity in all growing stages, the decrease in RWC and increase in RS and Tc was higher when compared with the control which asserts their susceptibility to soil water condition and leaf water potential. Potassium application, in both stressed/non-stressed conditions caused a lower RS and Tc, but increased RWC. To sum up, K2SO4 could ameliorate negative effects of water stress on physiological properties and consequently improve them. RWC, RS, Tc and ΔT, are beneficial indices for screening large numbers of drought-tolerant rapeseed varieties in a short time at critical stages of crop growth.Key words: Brassica napus L., canopy temperature, potassium fertilizer, relative water content, stomatal resistance, water deficit stress

New feature-preserving filter algorithm based on a priori knowledge of pixel types

The concept and algorithmic details of a new corrupted-pixel-identification- (CPI)-based estimation filter are presented. The approach is by transforming a noisy subimage centered on a corrupted pixel into its discrete cosine transform (DCT) domain, and approximating the transformed subimage by its DC (average) coefficient only, an estimation of the noise distribution is made by combining the knowledge of the number of corrupted pixels in the subimage and the pixel intensity of the noise term. This enables the DC coefficient of the restored image in the DCT domain to be determined, and from this, the restored pixel intensity can be calculated by an inverse DCT. The whole restored image can be obtained after all the corrupted pixels are exhausted. From an extensive performance evaluation, it was found that the new algorithm has a number of desirable characteristics. First, the CPI-based estimation algorithm performs extremely well when heavily degraded images are concerned. Second, the CPI-based estimation algorithm has acceptable feature-preserving properties, far better than the conventional median filter. Third, the new algorithm can be applied iteratively to the same noisy image. Fourth, the computing speed of the CPI-based estimation algorithm is almost three times faster than the conventional median filter, and 1.6 times faster than the original CPI algorithm, making it the fastest algorithm in this class so far. ©1996 Society of Photo – Optical Instrumentation Engineers.published_or_final_versio

A Fast And Accurate Scoreboard Algorithm For estimating Stationary Backgrounds In An Image Sequence

This paper presents a stationary background estimation algorithm for color image sequence. The algorithm employs the running mode and running average algorithms, which are two commonly used algorithms, as the estimation core. A scoreboard is used to kept the pixel variations in the image sequence and is used to select between the running mode or the running average algorithm in each estimation. Our evaluation results show that by selecting, intelligently, the estimation core between the two algorithms according to the scoreboard values, the proposed background estimation algorithm has excellent performance in terms of estimation accuracy and speed.published_or_final_versio

Vehicle-Type Identification Through Automated Virtual Loop Assignment and Block-Based Direction-Biased Motion Estimation

This paper presents a method of automated virtual loop assignment and direction-based motion estimation. The unique features of our approach are that first, a number of loops are automatically assigned to each lane. The merit of doing this is that it accommodates pan-tilt-zoom (PTZ) actions without needing further human interaction. Second, the size of the virtual loops is much smaller for estimation accuracy. This enables the use of standard block-based motion estimation techniques that are well developed for video coding. Third, the number of virtual loops per lane is large. The motion content of each block may be weighted and the collective result offers a more reliable and robust approach in motion estimation. Comparing this with traditional inductive loop detectors (ILDs), there are a number of advantages. First, the size and number of virtual loops may be varied to fine-tune detection accuracy. Second, it may also be varied for an effective utilization of the computing resources. Third, there is no failure rate associated with the virtual loops or physical installation. As the loops are defined on the image sequence, changing the detection configuration or redeploying the loops to other locations on the same image sequence requires only a change of the assignment parameters. Fourth, virtual loops may be reallocated anywhere on the frame, giving flexibility in detecting different parameters. Our simulation results indicate that the proposed method is effective in type classification.published_or_final_versio

An effective video analysis method for detecting red light runners

This paper presents a novel method for automatic red light runner detection on a video, which is fundamentally different from the concept of conventional red light camera systems. In principle, it extracts the state of the traffic lights and vehicle motions without any physical or electronic interconnections to the traffic light control system or the buried loop detectors. Purely from the video, the new method first constructs a traffic light sequence and then it estimates vehicle motions beyond the stop line while the light is red. In the former, the spatial and temporal relationships of individual traffic lights are utilized. In the latter, the concept of virtual loop detector has been introduced to emulate the physical loop detectors. A prototype was implemented based on this method and was tested in a number of field trials. The results show that the new method is able to detect multiple red light runners in multiple lanes. It is also capable of tolerating a number of hostile but realistic situation such as: 1) minimum number of traffic light; 2) pseudomotions due to shadows; 3) poor contrast; 4) pedestrian motions; and 5) turning vehicles.published_or_final_versio

Methacrylate peak determination and selection recommendations using ATR-FTIR to investigate polymerisation of dental methacrylate mixtures.

Investigation of polymerisation kinetics using ATR-FTIR systems is common in many dental studies. However, peak selection methods to calculate monomer-polymer conversion can vary, consequently affecting final results. Thus, the aim of this study is to experimentally confirm which method is less prone to systematic errors. Three commercial restorative materials were tested-Vertise Flow (VF), Constic and Activa Bioactive Restorative Kids. Firstly, Attenuated Total Reflectance Fourier Transform Infra-Red (ATR-FTIR) (Spectrum One, Perkin-Elmer, UK) spectra of monomers were acquired-10-methacryloyloxy decyl dihydrogen phosphate (10-MDP), bisphenol-A glycidyl dimethacrylate (Bis-GMA), 2-hydroxyethyl methacrylate (HEMA), triethyelene glycol dimethacrylate (TEGDMA) and urethane dimethacrylate (UDMA) to investigate proportionality of methacrylate peak heights versus concentration. Spectral changes upon light exposure of 2 mm discs of the restorative materials (irradiated for 20 s, LED curing unit 1100-1330 mW/cm2) were assessed to study polymerisation kinetics (n = 3), with continuous acquisition of spectra, before, during and after light exposure. Peak differences and degrees of conversion (DC %) were calculated using 1320/1336, 1320/1350 and 1636/1648 cm-1 as reaction/reference peaks. Inferential statistics included a MANOVA and within-subjects repeated measures ANOVA design (5% significance level). Proportionality of methacrylate peak height to concentration was confirmed, with the 1320/1352 cm-1 peak combination showing the lowest coefficient of variation (8%). Difference spectra of the polymerisation reaction showed noise interference around the 1500-1800 cm-1 region. Across the different materials, DC % results are highly dependent upon peak selection (p<0.001), with higher variability associated to the 1636 cm-1. Significant differences in the materials were only detected when the 1320 cm-1 peak was used (p<0.05). Within the same materials, methods were significantly different for Constic and Activa (p<0.05). It is possible to conclude that the 1320 cm-1 peak is more adequate to assess polymerisation of methacrylates and is therefore recommended