Shear friction strength of monolithic concrete interfaces

YesThis paper presents an integrated model for shear friction strength of monolithic concrete interfaces derived from the upper-bound theorem of concrete plasticity. The model accounts for the effects of applied axial stresses and transverse reinforcement on the shear friction action at interfacial shear cracks. Simple equations were also developed to generalize the effectiveness factor for compression, ratio of effective tensile to compressive strengths and angle of concrete friction. The reliability of the proposed model was then verified through comparisons with previous empirical equations and 103 push-off test specimens compiled from different sources in the literature. The previous equations considerably underestimate the concrete shear transfer capacity and the underestimation is notable for the interfaces subjected to additional axial stresses. The proposed model provides superior accuracy in predicting the shear friction strength, resulting in a mean between experimental and predicted friction strengths of 0.97 and least scatter. Moreover, the proposed model has consistent trends with test results in evaluating the effect of various parameters on the shear friction strength

Shear strength of reinforced concrete dapped-end beams using mechanism analysis.

yesA mechanism analysis based on the upper-bound theorem of concrete plasticity is developed to predict the critical failure plane and corresponding shear capacity of reinforced concrete dapped-end beams. Failure modes observed in physical tests of reinforced concrete dapped-end beams are idealised as an assemblage of two moving blocks separated by a failure surface of displacement discontinuity. The developed mechanism analysis rationally represents the effect of different parameters on failure modes; as a result, the predicted shear capacity is in good agreement with test results. On the other hand, empirical equations specified in the Precast/Prestressed Concrete Institute design method and strutand-tie model based on ACI 318-05 highly underestimate test results. The shear capacity of dapped-end beams predicted by the mechanism analysis and strut-and-tie model decreases with the increase of shear span-to-full beam depth ratio when failure occurs along diagonal cracks originating at the bottom corner of the full-depth beam, although the shear span-to-full beam depth ratio is ignored in the Precast/Prestressed Concrete Institute design method

Changing indications and socio-demographic determinants of (adeno)tonsillectomy among children in England--are they linked? A retrospective analysis of hospital data.

OBJECTIVE: To assess whether increased awareness and diagnosis of obstructive sleep apnoea syndrome (OSAS) and national guidance on tonsillectomy for recurrent tonsillitis have influenced the socio-demographic profile of children who underwent tonsillectomy over the last decade. METHOD: Retrospective time-trends study of Hospital Episodes Statistics data. We examined the age, sex and deprivation level, alongside OSAS diagnoses, among children aged <16 years who underwent (adeno)tonsillectomy in England between 2001/2 and 2011/12. RESULTS: Among children aged <16 years, there were 29,697 and 27,732 (adeno)tonsillectomies performed in 2001/2 and 2011/12, respectively. The median age at (adeno)tonsillectomy decreased from 7 (IQR: 5-11) to 5 (IQR: 4-9) years over the decade. (Adeno)tonsillectomy rates among children aged 4-15 years decreased by 14% from 350 (95%CI: 346-354) in 2001/2 to 300 (95%CI: 296-303) per 100,000 children in 2011/12. However, (adeno)tonsillectomy rates among children aged <4 years increased by 58% from 135 (95%CI: 131-140) to 213 (95%CI 208-219) per 100,000 children in 2001/2 and 2011/2, respectively. OSAS diagnoses among children aged <4 years who underwent surgery increased from 18% to 39% between these study years and the proportion of children aged <4 years with OSAS from the most deprived areas increased from 5% to 12%, respectively. CONCLUSIONS: (Adeno)tonsillectomy rates declined among children aged 4-15 years, which reflects national guidelines recommending the restriction of the operation to children with more severe recurrent throat infections. However, (adeno)tonsillectomy rates among pre-school children substantially increased over the past decade and one in five children undergoing the operation was aged <4 years in 2011/12.The increase in surgery rates in younger children is likely to have been driven by increased awareness and detection of OSAS, particularly among children from the most deprived areas

Thinking with a New Purpose: Lessons Learned from Teaching Design Thinking Skills to Creative Technology Students

This paper reports on the insights gained from introducing design thinking into the final year of a UK university course where students created positive behavior change interventions. The rationale for the course design and teaching process are outlined, with a focus on design as engineering versus innovation process. The students took a design thinking journey using Stanford University d.school's 5-step approach of Empathize-Define-Ideate-Prototype-Test, and their journey is described in detail. We found that at first students found the Design Thinking approach counter-intuitive and confusing, yet throughout the process they recognized the strengths and opportunities it offers. On the whole, students reflected positively on their learning and on their re-evaluation of the role of a (service) designer. Lessons learned from a teaching point of view are also outlined, the most poignant being the realization that it was necessary to 'un-teach' design practices students had come to take for granted, in particular the view of design as a self-inspired, linear and carefully managed process

Green Production of Anionic Surfactant Obtained from Pea Protein

A pea protein isolate was hydrolyzed by a double enzyme treatment method in order to obtain short peptide sequences used as raw materials to produce lipopeptides-based surfactants. Pea protein hydrolysates were prepared using the combination of Alcalase and Flavourzyme. The influence of the process variables was studied to optimize the proteolytic degradation to high degrees of hydrolysis. The average peptide chain lengths were obtained at 3–5 amino acid units after a hydrolysis of 30 min with the mixture of enzymes. Then, N-acylation in water, in presence of acid chloride (C12 and C16), carried out with a conversion rate of amine functions of 90%, allowed to obtain anionic surfactant mixtures (lipopeptides and sodium fatty acids). These two steps were performed in water, in continuous and did not generate any waste. This process was therefore in line with green chemistry principles. The surface activities (CMC, foaming and emulsifying properties) of these mixtures were also studied. These formulations obtained from natural renewable resources and the reactions done under environmental respect, could replace petrochemical based surfactants for some applications