Real-Time Magnetic Resonance Imaging

Real‐time magnetic resonance imaging (RT‐MRI) allows for imaging dynamic processes as they occur, without relying on any repetition or synchronization. This is made possible by modern MRI technology such as fast‐switching gradients and parallel imaging. It is compatible with many (but not all) MRI sequences, including spoiled gradient echo, balanced steady‐state free precession, and single‐shot rapid acquisition with relaxation enhancement. RT‐MRI has earned an important role in both diagnostic imaging and image guidance of invasive procedures. Its unique diagnostic value is prominent in areas of the body that undergo substantial and often irregular motion, such as the heart, gastrointestinal system, upper airway vocal tract, and joints. Its value in interventional procedure guidance is prominent for procedures that require multiple forms of soft‐tissue contrast, as well as flow information. In this review, we discuss the history of RT‐MRI, fundamental tradeoffs, enabling technology, established applications, and current trends

Neighbourhood, Route and Workplace-Related Environmental Characteristics Predict Adults' Mode of Travel to Work

Commuting provides opportunities for regular physical activity which can reduce the risk of chronic disease. Commuters' mode of travel may be shaped by their environment, but understanding of which specific environmental characteristics are most important and might form targets for intervention is limited. This study investigated associations between mode choice and a range of objectively assessed environmental characteristics.Participants in the Commuting and Health in Cambridge study reported where they lived and worked, their usual mode of travel to work and a variety of socio-demographic characteristics. Using geographic information system (GIS) software, 30 exposure variables were produced capturing characteristics of areas around participants' homes and workplaces and their shortest modelled routes to work. Associations between usual mode of travel to work and personal and environmental characteristics were investigated using multinomial logistic regression.Of the 1124 respondents, 50% reported cycling or walking as their usual mode of travel to work. In adjusted analyses, home-work distance was strongly associated with mode choice, particularly for walking. Lower odds of walking or cycling rather than driving were associated with a less frequent bus service (highest versus lowest tertile: walking OR 0.61 [95% CI 0.20–1.85]; cycling OR 0.43 [95% CI 0.23–0.83]), low street connectivity (OR 0.22, [0.07–0.67]; OR 0.48 [0.26–0.90]) and free car parking at work (OR 0.24 [0.10–0.59]; OR 0.55 [0.32–0.95]). Participants were less likely to cycle if they had access to fewer destinations (leisure facilities, shops and schools) close to work (OR 0.36 [0.21–0.62]) and a railway station further from home (OR 0.53 [0.30–0.93]). Covariates strongly predicted travel mode (pseudo r-squared 0.74).Potentially modifiable environmental characteristics, including workplace car parking, street connectivity and access to public transport, are associated with travel mode choice, and could be addressed as part of transport policy and infrastructural interventions to promote active commuting

Risk factors for delay in symptomatic presentation: a survey of cancer patients

Background: Delay in symptomatic presentation leading to advanced stage at diagnosis may contribute to poor cancer survival. To inform public health approaches to promoting early symptomatic presentation, we aimed to identify risk factors for delay in presentation across several cancers. Methods: We surveyed 2371 patients with 15 cancers about nature and duration of symptoms using a postal questionnaire. We calculated relative risks for delay in presentation (time from symptom onset to first presentation >3 months) by cancer, symptoms leading to diagnosis and reasons for putting off going to the doctor, controlling for age, sex and deprivation group. Results: Among 1999 cancer patients reporting symptoms, 21% delayed presentation for >3 months. Delay was associated with greater socioeconomic deprivation but not age or sex. Patients with prostate (44%) and rectal cancer (37%) were most likely to delay and patients with breast cancer least likely to delay (8%). Urinary difficulties, change of bowel habit, systemic symptoms (fatigue, weight loss and loss of appetite) and skin symptoms were all common and associated with delay. Overall, patients with bleeding symptoms were no more likely to delay presentation than patients who did not have bleeding symptoms. However, within the group of patients with bleeding symptoms, there were significant differences in risk of delay by source of bleeding: 35% of patients with rectal bleeding delayed presentation, but only 9% of patients with urinary bleeding. A lump was a common symptom but not associated with delay in presentation. Twenty-eight percent had not recognised their symptoms as serious and this was associated with a doubling in risk of delay. Embarrassment, worry about what the doctor might find, being too busy to go to the doctor and worry about wasting the doctor’s time were also strong risk factors for delay, but were much less commonly reported (<6%). Interpretation: Approaches to promote early presentation should aim to increase awareness of the significance of cancer symptoms and should be designed to work for people of the lowest socioeconomic status. In particular, awareness that rectal bleeding is a possible symptom of cancer should be raised

Rhinocerebral mucormycosis treated with 32 gram liposomal amphotericin B and incomplete surgery: a case report

BACKGROUND: Mucormycosis (or zygomycosis) is the term for infection caused by fungi of the order Mucorales. Mucoraceae may produce severe disease in susceptible individuals, notably patients with diabetes and leukemia. Rhinocerebral mucormycosis most commonly manifests itself in the setting of poorly controlled diabetes, especially with ketoacidosis. CASE PRESENTATION: A 31-year-old diabetic man presented to the outpatient clinic with the following signs and symptoms: headache, periorbital pain, swelling and loss of vision in the right eye. On physical examination his right eye was red and swollen. There was periorbital cellulitis and the conjunctiva was edematous. KOH preparation of purulent discharge showed broad, ribbonlike, aseptate hyphae when examined under a fluorescence microscope. Cranial MRI showed involvement of the right orbit, thrombosis in cavernous sinus and infiltrates at ethmoid and maxillary sinuses. Mucormycosis was diagnosed based on these findings. Amphotericin B (AmBisome(®); 2 mg/kg.d) was initiated after the test doses. Right orbitectomy and right partial maxillectomy were performed; the lesions in ethmoid and maxillary sinuses were removed. The duration of the liposomal amphotericin B therapy was approximately 6 months and the total dose of liposomal amphotericin B used was 32 grams. Liposomal amphotericin B therapy was stopped six months later and oral fluconazole was started. CONCLUSIONS: Although a total surgical debridement of the lesions could not be performed, it is remarkable that regression of the disease could be achieved with medical therapy alone

High-throughput, quantitative analyses of genetic interactions in E. coli.

Large-scale genetic interaction studies provide the basis for defining gene function and pathway architecture. Recent advances in the ability to generate double mutants en masse in Saccharomyces cerevisiae have dramatically accelerated the acquisition of genetic interaction information and the biological inferences that follow. Here we describe a method based on F factor-driven conjugation, which allows for high-throughput generation of double mutants in Escherichia coli. This method, termed genetic interaction analysis technology for E. coli (GIANT-coli), permits us to systematically generate and array double-mutant cells on solid media in high-density arrays. We show that colony size provides a robust and quantitative output of cellular fitness and that GIANT-coli can recapitulate known synthetic interactions and identify previously unidentified negative (synthetic sickness or lethality) and positive (suppressive or epistatic) relationships. Finally, we describe a complementary strategy for genome-wide suppressor-mutant identification. Together, these methods permit rapid, large-scale genetic interaction studies in E. coli

Spinocerebellar Ataxia Type 23: A Genetic Update

The spinocerebellar ataxia type 23 locus was identified in 2004 based on linkage analysis in a large, two-generation Dutch family. The age of onset ranged 43–56 years and the phenotype was characterized by a slowly progressive, isolated ataxia. Neuropathological examination revealed neuronal loss in the Purkinje cell layer, dentate nuclei, and inferior olives. Ubiquitin-positive intranuclear inclusions were found in nigral neurons, but were considered to be Marinesco bodies. The disease locus on chromosome 20p13-12.3 was found to span a region of approximately 6 Mb of genomic DNA, containing 97 known or predicted genes. To date, no other families have been described that also map to this SCA locus. Direct sequencing of the coding regions of 21 prioritized candidate genes did not reveal any disease-causing mutation. Apparently, the SCA23 gene is a disease gene with a different function than the genes that have been associated with other known SCA types. Work to elucidate the chromosomal organization of the SCA23 locus will eventually discover the responsible disease gene

Changes observed in radionuclide bone scans during and after teriparatide treatment for osteoporosis

# The Author(s) 2011. This article is published with open access at Springerlink.com Purpose Visual changes on radionuclide bone scans have been reported with teriparatide treatment. To assess this, serial studies were evaluated and quantified in ten postmenopausal women with osteoporosis treated with teriparatide (20 μg/day subcutaneous) who had 99m Tc-methylene diphosphonate (MDP) bone scans (baseline, 3 and 18 months, then after 6 months off therapy). Methods Women were injected with 600 MBq 99m Tc-MDP, and diagnostic bone scan images were assessed at 3.5 h. Additional whole-body scans (10 min, 1, 2, 3 and 4 h) were analysed for 99m Tc-MDP skeletal plasma clearance (Kbone). Regional Kbone differences were obtained for the whole skeleton and six regions (calvarium, mandible, spine, pelvis, upper and lower extremities). Bone turnover markers (BTM) were also measured. Results Most subjects showed visual changes on 3- and 18month bone scan images that disappeared after 6 months off therapy. Enhanced uptake was seen predominantly in the calvarium and lower extremities. Whole skeleton Kbone displayed a median increase of 22 % (3 months, p=0.004) and 34 % (18 months, p=0.002) decreasing to 0.7% (6 months off therapy). Calvarium Kbone changes were three times larger than other sites. After 6 months off therapy, all Kbone and BTM values returned towards baseline

Factors affecting Removal of Bacterial Pathogens from Healthcare Surfaces during Dynamic Wiping

Wiping of surfaces contaminated with pathogenic bacteria is a key strategy for combatting transmission of healthcare associated infections. It is essential to understand the extent to which removal of bacteria is modulated by fibre properties, biocidal liquid impregnation and applied hand pressure. The influence of intrinsic and extrinsic factors on the removal efficiencies of pathogenic bacteria was studied. Nonwoven wipes made of either hydrophobic (polypropylene) or hygroscopic (lyocell) fibres were manufactured and dynamic removal efficiency of bacteria studied. The single most important parameter affecting bacterial removal efficiency was impregnation with biocidal liquid (p <0.05). For inherently hygroscopic 100% regenerated cellulose (lyocell) wipes impregnated with biocidal liquid, removal of E. coli, S. aureus and E. faecalis improved by increasing the fabric surface density and wiping pressure to their maximal values - 150 g.m-2 and 13.80 kN.m-2 respectively. For inherently hydrophobic 100% polypropylene nonwoven wipes, the same conditions maximised the removal efficiency of S. aureus, but for E. coli and E. faecalis a reduction in the wiping pressure to 4.68 kN.m-2 was required. Best practice involves the use of higher surface density wipes (150 g m-2) containing regenerated cellulose fibres loaded with liquid biocide, and applied with the greatest possible wiping pressure

Complex Fluids and Hydraulic Fracturing

Nearly 70 years old, hydraulic fracturing is a core technique for stimulating hydrocarbon production in a majority of oil and gas reservoirs. Complex fluids are implemented in nearly every step of the fracturing process, most significantly to generate and sustain fractures and transport and distribute proppant particles during and following fluid injection. An extremely wide range of complex fluids are used: naturally occurring polysaccharide and synthetic polymer solutions, aqueous physical and chemical gels, organic gels, micellar surfactant solutions, emulsions, and foams. These fluids are loaded over a wide range of concentrations with particles of varying sizes and aspect ratios and are subjected to extreme mechanical and environmental conditions. We describe the settings of hydraulic fracturing (framed by geology), fracturing mechanics and physics, and the critical role that non-Newtonian fluid dynamics and complex fluids play in the hydraulic fracturing process