65 research outputs found
Resource-saving technologies for the basic cultivation of chernozem typical in the northeastern region of the Central Chernozem region
The research was carried out with the aim of solving the problem of optimizing the system of basic tillage, providing a reduction in energy costs, obtaining high crop productivity and profitability of production in a grain-fallow crop rotation in the conditions of the northeast of the Central Chernozem Region. The work was carried out in 2013-2021, in a stationary field experiment on a typical heavy loamy chernozem with a high supply of mineral nutrients with a humus content in the arable layer of 6.8-7.0%. The scheme of the experiment included the following options for the main tillage systems: traditional mid-depth moldboard, for soybean at 25-27 cm (control); resource-saving: surface (disking by 10-12 cm) for all crops and non-moldboard mid-depth, 25-27 cm for soybeans and 20-22 cm for cereals; combined: moldboard-less plowing (25% plowing for soybeans + 75% non-moldboard semi-deep plowing for cereals) and moldboard-surface (25% plowing for soybeans + 75% surface plowing for cereals). Against the background of treatments for crop rotation, fertilizers and plant protection products were used. It was found that resource-saving non-moldboard and combined tillage for sowing, on average, for crop rotation crops, accumulated more moisture in the arable layer by 12.1-13.8%, by 3.9-7.8% in the meter layer, compared with traditional moldboard cultivation. . Surface tillage reduced the reserve of productive moisture in the arable layer by 4.4%, in the meter layer - by 5.1%. It has been studied that the best nitrogen, phosphorus and potassium regimes are established with traditional dump and combined dump-surface treatments. In the variants with surface and non-moldboard tillage, a decrease in the content of mineral nutrition elements in the arable soil layer is noted. At the same time, there was an increase in the process of differentiation of the arable layer by fertility with a concentration of nutrients in the layer of 0-10 cm and a significant decrease in them in the layer of 20-30 cm. 2.1 times without herbicides, 2.2 times against the background of herbicide treatment, in terms of the number of weeds and 1.4 and 1.5 times in terms of their mass, in comparison with traditional moldboard treatment. The use of herbicides contributed to a decrease in the number of weeds and the mass of the weed component on average for the variants of the experiment by 55.4 and 60.0%, respectively. It was analyzed that the use of surface and non-moldboard tillage systems led to a decrease in the productivity of a hectare of arable land in crop rotation by 0.09 tons of grain units without protection and by 0.11-0.14 tons in combination with plant protection. The combined (dump-surface) system of tillage ensured the productivity of arable land at the level of the traditional dump system at different depths. It has been proved that the highest profitability of production in crop rotation (250.3%) was achieved using a combined (dump-surface) tillage system in combination with the use of complex protection products (seed dressing + pesticides for crop vegetation). Resource-saving processing systems (surface and non-moldboard) worsened economic performance. Income from the use of these tillage systems decreased by 4.8-5.5%, profitability decreased by 1.6-2.7% compared to the traditional mid-depth moldboard tillage system in crop rotation
Elitology of education and challenges of the 21st century
The object of this research is the elitology of education which represents a new character and a new meaning of elite selection according to the principle of high-quality professional knowledge. The article analyzes the key categories, approaches and directions, as well as the problems of changing attitudes towards elites and the elite in the context of the upcoming information society. In turn, the subject of this work is the challenges that the education system will have to face in the conditions of early post industrial society.Объектом исследования является элитология образования, которая предполагает новый характер и новый смысл подготовки элит в соответствии с принципом качественных профессиональных знаний. В статье анализируются ключевые категории, подходы и направления, а также проблемы изменения отношения к элите в контексте формирующегося информационного общества. В свою очередь, предметом этой статьи являются проблемы, с которыми системе образования придется столкнуться в условиях раннего постиндустриального общества.Об'єктом дослідження є елітологія освіти, яка передбачає новий характер і новий зміст підготовки еліт відповідно до принципу якісних професійних знань. У статті аналізуються ключові категорії, підходи і напрямки, а також проблеми зміни ставлення до еліти в контексті інформаційного суспільства, що формується. У свою чергу, предметом цієї статті є проблеми, з якими системі освіти доведеться зіткнутися в умовах раннього постіндустріального суспільства
Elitology of education and challenges of the 21st century
The object of this research is the elitology of education which represents a new character and a new meaning of elite selection according to the principle of high-quality professional knowledge. The article analyzes the key categories, approaches and directions, as well as the problems of changing attitudes towards elites and the elite in the context of the upcoming information society. In turn, the subject of this work is the challenges that the education system will have to face in the conditions of early post industrial society.Объектом исследования является элитология образования, которая предполагает новый характер и новый смысл подготовки элит в соответствии с принципом качественных профессиональных знаний. В статье анализируются ключевые категории, подходы и направления, а также проблемы изменения отношения к элите в контексте формирующегося информационного общества. В свою очередь, предметом этой статьи являются проблемы, с которыми системе образования придется столкнуться в условиях раннего постиндустриального общества.Об'єктом дослідження є елітологія освіти, яка передбачає новий характер і новий зміст підготовки еліт відповідно до принципу якісних професійних знань. У статті аналізуються ключові категорії, підходи і напрямки, а також проблеми зміни ставлення до еліти в контексті інформаційного суспільства, що формується. У свою чергу, предметом цієї статті є проблеми, з якими системі освіти доведеться зіткнутися в умовах раннього постіндустріального суспільства
Ozone generator based on surface dielectric barrier discharge with pulse power supply
A pilot model of an ozone generator with a pulsed power supply has been developed. The ozone generator can be used for disinfection of domestic and industrial premises, in medicine and the chemical industry. Ozone is generated by a surface dielectric barrier discharge reactor (SDBD), consisting of 18 parallel-connected quartz tubes, inside and outside of which spiral the stainless steel high-voltage electrodes are wound. The measurements of the main parameters of the ozone generator showed that the ozone concentration reached 57 mg/l, and the output ozone concentration is 9.4 g/h. The developed design takes into account the technical features of the implementation of a particular type of discharge used, allows reducing energy consumption for ozone generation, having improved output parameters.Розроблено пілотну модель генератора озону з імпульсним живленням. Генератор озону можна використовувати для дезінфекції побутових і промислових приміщень, у медицині та хімічній промисловості. Озон генерується реактором поверхневого діелектричного бар’єрного розряду, що складається з 18 паралельно з’єднаних кварцових трубок, всередині і зовні яких розташовані спіральні обмотки з нержавіючої сталі, що служать високовольтними електродами. Вимірювання основних параметрів генератора озону показало, що концентрація озону досягла 57 мг/л, а вихідна концентрація озону становить 9,4 г/год. Розроблена конструкція враховує технічні особливості реалізації конкретного виду розряду, що використовується, дозволяє знизити енерговитрати на генерацію озону і покращити вихідні параметри
Development of multi-purpose portable air ozonator based on surface DBD
In this paper we describe a compact, economical, easy to use air ozonator developed at the Institute of Plasma Physics of the NSC KIPT and manufactured in collaboration with Public Joint Stock Company “HARTRON-PLANT” LtD. Ozonator of OzD 10/0.1-type uses a surface dielectric barrier discharge to generate ozone from flowing air oxygen, has a flexible system of settings, and is an autonomous and mobile sanitary device for the disinfection of closed spaces up to 500 m³. The output ozone concentration reaches 0.1 g/m³ with productivity of 10 g/h. A microprocessor controller has been developed to control the operation of the ozonator. The results of bacteria inactivation in two various premises for surgical operations are presented.Представлено компактний, економічний, простий у використанні повітряний озонатор, розроблений в Інституті фізики плазми ННЦ ХФТІ, який випускається спільно з ПАТ “ХАРТРОН-ПЛАНТ” ТОВ. Озонатор OzD 10/0.1 використовує діелектричний бар’єрний розряд для генерації озону з повітря, що проходить, має гнучку систему налаштувань і є автономним і мобільним санітарним пристроєм для дезінфекції закритих приміщень до 500 м³. Розроблено мікропроцесорний контролер для управління роботою озонатора. Представлено результати інактивації бактерій в двох різних приміщеннях для хірургічних операцій.Представлен компактный, экономичный, простой в использовании воздушный озонатор, разработанный в Институте физики плазмы ННЦ ХФТИ, который выпускается совместно с НПП “ХАРТРОН-ПЛАНТ” ЛТД. Озонатор OzD 10/0.1 генерирует поверхностный диэлектрический барьерный разряд для образования озона из проходящего воздуха, имеет гибкую систему настроек и является автономным и мобильным санитарным устройством для дезинфекции закрытых помещений до 500 м³. Разработан микропроцессорный контроллер для управления работой озонатора. Представлены результаты инактивации бактерий в двух различных помещениях для хирургических операций
Functional protective ZrN coatings on implants for trauma surgery
The nano-crystalline films of zirconium nitride have been synthesized on implants for trauma surgery made of AISI 316 L stainles steel by using vacuum-arc deposition under RF-biasing mode in “Bulat” type device. Structure examinations – X-ray diffraction analysis (XRD), X-ray fluoriscent analysis (XRF), scanning electron microscopy (SEM) with microanalysis (EDX), nanoidentation method – were performed to study phase and chemical composition, surface morphology, microstructure and nanohardness of ZrN coatings. The corrosion resistance of coatings has been tested in 0.9% quasiphysiological NaCl solution.Нанокристалічні плівки нітриду цирконію були синтезовані на імплантах для травматології, які виготовлені з нержавіючої сталі AISI 316 L, за допомогою вакуумно-дугового осадження в режимі ВЧ-зміщення в установці типу «Булат». Структурні дослідження – рентгенівський дифракційний аналіз (XRD), рентгенівський флуоресцентний аналіз (XRF), скануюча електронна мікроскопія (SEM) з мікроаналізом (EDX), метод наноідентифікації – були виконані для вивчення фазового та хімічного складів, морфології поверхні, мікроструктури та нанотвердості покриттів ZrN. Корозійну стійкість покриттів було досліджено в 0,9% квазіфізіологічному розчині NaCl.Нанокристаллические пленки нитрида циркония были синтезированы на имплантах для травматологии, изготовленных из нержавеющей стали AISI 316 L, с использованием вакуумно-дугового напыления в режиме ВЧ-смещения в установке «Булат». Структурные исследования – рентгеноструктурный анализ (XRD), рентгенофлуоресцентный анализ (XRF), сканирующая электронная микроскопия (SEM) с микроанализом (EDX), метод наноидентификации – были выполнены для изучения фазового и химического составов, морфологии поверхности, микроструктуры и нанотвердости покрытий ZrN. Коррозионная стойкость покрытий исследовалась в 0,9% квазифизиологическом растворе NaCl
Polygonal Structures in the Gaseous Disk: Numerical Simulations
The results of numerical simulations of a gaseous disk in the potential of a
stellar spiral density wave are presented. The conditions under which
straightened spiral arm segments (rows) form in the gas component are studied.
These features of the spiral structure were identified in a series of works by
A.D. Chernin with coauthors. Gas-dynamic simulations have been performed for a
wide range of model parameters: the pitch angle of the spiral pattern, the
amplitude of the stellar spiral density wave, the disk rotation speed, and the
temperature of the gas component. The results of 2D- and 3D-disk simulations
are compared. The rows in the numerical simulations are shown to be an
essentially nonstationary phenomenon. A statistical analysis of the
distribution of geometric parameters for spiral patterns with rows in the
observed galaxies and the constructed hydrodynamic models shows good agreement.
In particular, the numerical simulations and observations of galaxies give
for the average angles between straight segments.Comment: 22 pages, 10 figure
Renormalization group analysis of competing orders and the pairing symmetry in Fe-based superconductors
We analyze antiferromagnetism and superconductivity in novel Fe-based
superconductors within the weak-coupling, itinerant model of electron and hole
pockets near (0,0) and (\pi,\pi) in the folded Brillouin zone. We discuss the
interaction Hamiltonian, the nesting, the RG flow of the couplings at energies
above and below the Fermi energy, and the interplay between SDW magnetism,
superconductivity and charge orbital order. We argue that SDW
antiferromagnetism wins at zero doping but looses to superconductivity upon
doping. We show that the most likely symmetry of the superconducting gap is
A_{1g} in the folded zone. This gap has no nodes on the Fermi surface but
changes sign between hole and electron pockets. We also argue that at weak
coupling, this pairing predominantly comes not from a spin fluctuation exchange
but from a direct pair hopping between hole and electron pockets.Comment: A review on RG approach for the special issue of Physica C on
Fe-based superconductors. 15 pp, 8 figure
Influence of s± symmetry on unconventional superconductivity in pnictides above the Pauli limit – two-band model study
Tides in colliding galaxies
Long tails and streams of stars are the most noticeable upshots of galaxy
collisions. Their origin as gravitational, tidal, disturbances has however been
recognized only less than fifty years ago and more than ten years after their
first observations. This Review describes how the idea of galactic tides
emerged, in particular thanks to the advances in numerical simulations, from
the first ones that included tens of particles to the most sophisticated ones
with tens of millions of them and state-of-the-art hydrodynamical
prescriptions. Theoretical aspects pertaining to the formation of tidal tails
are then presented. The third part of the review turns to observations and
underlines the need for collecting deep multi-wavelength data to tackle the
variety of physical processes exhibited by collisional debris. Tidal tails are
not just stellar structures, but turn out to contain all the components usually
found in galactic disks, in particular atomic / molecular gas and dust. They
host star-forming complexes and are able to form star-clusters or even
second-generation dwarf galaxies. The final part of the review discusses what
tidal tails can tell us (or not) about the structure and content of present-day
galaxies, including their dark components, and explains how tidal tails may be
used to probe the past evolution of galaxies and their mass assembly history.
On-going deep wide-field surveys disclose many new low-surface brightness
structures in the nearby Universe, offering great opportunities for attempting
galactic archeology with tidal tails.Comment: 46 pages, 13 figures, Review to be published in "Tidal effects in
Astronomy and Astrophysics", Lecture Notes in Physics. Comments are most
welcom
- …