526 research outputs found
Geometrical multilayers: coercivity in magnetic 3-D nanostructures
Electrodeposition of magnetic metals through self-assembly templates from polystyrene spheres is used for fabrication of magnetic nanostructures with 3-D architectures. These arrays demonstrate unusual properties including an oscillatory dependence of the coercive field on film thickness. Numerical simulations reveal that the ratio between the array period and the hole diameter in anti-dot array is a crucial parameter giving rise to qualitatively distinct magnetization reversal regimes
Electrodeposition of Ni-Si Schottky barriers
Electrodeposition is being used to fabricate magnetic microstructures directly on patterned n-type Si wafers of various substrate resistivities. The Ni-Si Schottky barrier is characterized and found to be of high quality for relatively low Si resistivities (1-2 Omega(.)cm), with extremely low reverse leakage. It is shown that a direct correlation exists among the electrodeposition potential, the roughness, and the coercivity of the films. A conductive seed layer or a back contact is not compulsory for electrodeposition on Si with resistivities up to 15 Omega(.)cm. This shows that electrodeposition of magnetic materials on Si might be a viable fabrication technique for magnetoresistance and spintronics applications
Self-assembly routes towards creating superconducting and magnetic arrays
Using self-assembly from colloidal suspensions of polystyrene latex spheres we prepared well-ordered templates. By electrochemical deposition of magnetic and superconducting metals in the pores of such templates highly ordered magnetic and superconducting anti-dot nano-structures with 3D architectures were created. Further developments of this template preparation method allow us to obtain dot arrays and even more complicated structures. In magnetic anti-dot arrays we observe a large increase in coercive field produced by nanoscale (50–1000nm) holes. We also find the coercive field to demonstrate an oscillatory dependence on film thickness. In magnetic dot arrays we have explored the genesis of 3D magnetic vortices and determined the critical dot size. Superconducting Pb anti-dot arrays show pronounced Little-Parks oscillations in Tc and matching effects in magnetization and magnetic susceptibility. The spherical shape of the holes results in significantly reduced pinning strength as compared to standard lithographic samples. Our results demonstrate that self-assembly template methods are emerging as a viable, low cost route to prepare sub-micron structures
Shape-induced anisotropy in antidot arrays from self-assembled templates
Using self-assembly of polystyrene spheres, well-ordered templates have been prepared on glass and silicon substrates. Strong guiding of self-assembly is obtained on photolithographically structured silicon substrates. Magnetic antidot arrays with three-dimensional architecture have been prepared by electrodeposition in the pores of these templates. The shape anisotropy demonstrates a crucial impact on magnetization reversal processes
Making Rules to Dispose of Manifestly Unfounded Assertions: An Exorcism of the Bogy of Non-Trans-Substantive Rules of Civil Procedure
Since the concept of universal design is already extending the boundary of disabilities, it is significant to include different aspects of information technology where universal design enabled efforts can contribute towards better designed systems, products and services. Sustainability is an important and growing public concern in today’s world. Nevertheless, attempts of designing IT system that can be called sustainable in nature are not so evident at present. In this paper we propose a framework originating from sustainable IT system design principles (also described in the paper). The universal design principles are used as a foundation upon which the resultant sustainable IT system design principles were derived. The concept of ‘sustainable IT system’ addressed in this research paper is beyond the common phenomenon of sustainability like green IT, CO2 emission etc. Rather, the framework proposed in this paper incorporates more user inclusion and increased user satisfaction together towards higher usability. And an IT system designed in this manner is a sustainable IT system according to the argument of this paper which can therefore be designed by following the proposed design principles and framework
Electrodeposition of Ni-Si Schottky barriers
Electrodeposition is being used to fabricate magnetic microstructures directly on patterned n-type Si wafers of various substrate resistivities. The Ni-Si Schottky barrier is characterized and found to be of high quality for relatively low Si resistivities (1-2 Omega(.)cm), with extremely low reverse leakage. It is shown that a direct correlation exists among the electrodeposition potential, the roughness, and the coercivity of the films. A conductive seed layer or a back contact is not compulsory for electrodeposition on Si with resistivities up to 15 Omega(.)cm. This shows that electrodeposition of magnetic materials on Si might be a viable fabrication technique for magnetoresistance and spintronics applications
High-Order Coupled Cluster Method (CCM) Calculations for Quantum Magnets with Valence-Bond Ground States
In this article, we prove that exact representations of dimer and plaquette
valence-bond ket ground states for quantum Heisenberg antiferromagnets may be
formed via the usual coupled cluster method (CCM) from independent-spin product
(e.g. N\'eel) model states. We show that we are able to provide good results
for both the ground-state energy and the sublattice magnetization for dimer and
plaquette valence-bond phases within the CCM. As a first example, we
investigate the spin-half -- model for the linear chain, and we show
that we are able to reproduce exactly the dimerized ground (ket) state at
. The dimerized phase is stable over a range of values for
around 0.5. We present evidence of symmetry breaking by considering
the ket- and bra-state correlation coefficients as a function of . We
then consider the Shastry-Sutherland model and demonstrate that the CCM can
span the correct ground states in both the N\'eel and the dimerized phases.
Finally, we consider a spin-half system with nearest-neighbor bonds for an
underlying lattice corresponding to the magnetic material CaVO (CAVO).
We show that we are able to provide excellent results for the ground-state
energy in each of the plaquette-ordered, N\'eel-ordered, and dimerized regimes
of this model. The exact plaquette and dimer ground states are reproduced by
the CCM ket state in their relevant limits.Comment: 34 pages, 13 figures, 2 table
Evidence of Color Coherence Effects in W+jets Events from ppbar Collisions at sqrt(s) = 1.8 TeV
We report the results of a study of color coherence effects in ppbar
collisions based on data collected by the D0 detector during the 1994-1995 run
of the Fermilab Tevatron Collider, at a center of mass energy sqrt(s) = 1.8
TeV. Initial-to-final state color interference effects are studied by examining
particle distribution patterns in events with a W boson and at least one jet.
The data are compared to Monte Carlo simulations with different color coherence
implementations and to an analytic modified-leading-logarithm perturbative
calculation based on the local parton-hadron duality hypothesis.Comment: 13 pages, 6 figures. Submitted to Physics Letters
- …