19,396 research outputs found
Housing flexibility effects on rotor stability
Preliminary rotordynamic evaluations are performed with a housing stiffness assumption that is typically determined only after the hardware is built. In addressing rotor stability, a rigid housing assumption was shown to predict an instability at a lower spin speed than a comparable flexible housing analysis. This rigid housing assumption therefore provides a conservative estimate of the stability threshold speed. A flexible housing appears to act as an energy absorber and dissipated some of the destabilizing force. The fact that a flexible housing is usually asymmetric and considerably heavier than the rotor was related to this apparent increase in rotor stability. Rigid housing analysis is proposed as a valuable screening criteria and may save time and money in construction of elaborate housing finite element models for linear stability analyses
Synthesis of aromatic secondary diamines
A series of N-methyl substituted aromatic polyamides derived from the secondary aromatic diamines, 4,4'-bis(methylamino)diphenylmethane, 3,3'-bis(methylamino) diphenylmethane, 4,4'-bis(methylamino)benzophenone or 3,3'-bis(methylamino)benzophenone and isophthaloyl dichloride, terphthaloyl dichloride or 3,3'diphenylmethane dicarboxylic acid dichloride was prepared by high temperature solution polymerization in s-tetrachloroethane. Compared to analogous unsubstituted and partially N-methylated aromatic polyamides, the full N-methylated polyamides exhibited significantly lower glass transition temperatures, reduced crystallinity, improved thermal stability and good solubility in chlorinated solvents
Measurement of the Spatial Cross-Correlation Function of Damped Lyman Alpha Systems and Lyman Break Galaxies
We present the first spectroscopic measurement of the spatial
cross-correlation function between damped Lyman alpha systems (DLAs) and Lyman
break galaxies (LBGs). We obtained deep u'BVRI images of nine QSO fields with
11 known z ~ 3 DLAs and spectroscopically confirmed 211 R < 25.5
photometrically selected z > 2 LBGs. We find strong evidence for an overdensity
of LBGs near DLAs versus random, the results of which are similar to that of
LBGs near other LBGs. A maximum likelihood cross-correlation analysis found the
best fit correlation length value of r_0 = 2.9^(+1.4)_(-1.5) h^(-1)Mpc using a
fixed value of gamma = 1.6. The implications of the DLA-LBG clustering
amplitude on the average dark matter halo mass of DLAs are discussed.Comment: 12 pages, 2 figures, accepted for publication in Astrophysical
Journal Letter
The kinetic temperature in a damped Lyman-alpha absorption system in Q2206-199 - an example of the warm neutral medium
By comparing the widths of absorption lines from OI, SiII and FeII in the
redshift z=2.076 single-component damped Lyman alpha absorption system in the
spectrum of Q2206-199 we establish that these absorption lines arise in Warm
Neutral Medium gas at ~12000 +/- 3000K. This is consistent with thermal
equilibrium model estimates of ~ 8000K for the Warm Neutral Medium in galaxies,
but not with the presence of a significant cold component. It is also
consistent with, but not required by, the absence of CII* fine structure
absorption in this system. Some possible implications concerning abundance
estimates in narrow-line WNM absorbers are discussed.Comment: 9 pages, 3 figures. MNRAS accepte
CII* Absorption in Damped Lyman Alpha Systems: (II) A New Window on the Star Formation History of the Universe
Starting from the SFR per unit physical area, determined for DLAs using the C
II* method, we obtain the SFR per unit comoving volume at 3, and
find that it agrees with that for the Lyman Break Galaxies (LBGs). Though the
mass of produced stars indicated by the SFRs is consistent with the current
densities of known stellar populations, the mass of metals produced by =2.5
is 30 times larger than detected in absorption in DLAs. The most likely
solutions to this ``missing metals'' problem is that star formation occurs in
compact bulge regions. We search for evidence of feedback and find no
correlations between the SFR per unit area and N(H I), but possible
correlations between SFR per unit area and low-ion velocity width and SFR per
unit area and metal abundance. We show that (a) the correlation between cooling
rate and dust-to-gas ratio is positive evidence for grain photoelectric
heating, (b) the CMB does not significantly populate the C II excited
fine-structure states, and (c) the ratio of CII* to resonance-line optical
depths is a sensitive probe of the multi-phase structure of the DLA gas. We
address recent arguments that DLAs are comprised only of WNM gas, and show them
to be inconclusive. Despite the rough agreement between SFR per unit comoving
volume for DLAs and LBGs, current evidence indicates these are distinct
populations
Nucleic Acid Sequence Design via Efficient Ensemble Defect Optimization
We describe an algorithm for designing the sequence of one or more interacting nucleic acid strands intended to adopt a target secondary structure at equilibrium. Sequence design is formulated as an optimization problem with the goal of reducing the ensemble defect below a user-specified stop condition. For a candidate sequence and a given target secondary structure, the ensemble defect is the average number of incorrectly paired nucleotides at equilibrium evaluated over the ensemble of unpseudoknotted secondary structures. To reduce the computational cost of accepting or rejecting mutations to a random initial sequence, candidate mutations are evaluated on the leaf nodes of a tree-decomposition of the target structure. During leaf optimization, defect-weighted mutation sampling is used to select each candidate mutation position with probability proportional to its contribution to the ensemble defect of the leaf. As subsequences are merged moving up the tree, emergent structural defects resulting from crosstalk between sibling sequences are eliminated via reoptimization within the defective subtree starting from new random subsequences. Using a Î(N^3) dynamic program to evaluate the ensemble defect of a target structure with N nucleotides, this hierarchical approach implies an asymptotic optimality bound on design time: for sufficiently large N, the cost of sequence design is bounded below by 4/3 the cost of a single evaluation of the ensemble defect for the full sequence. Hence, the design algorithm has time complexity Ω(N^3). For target structures containing N â{100,200,400,800,1600,3200} nucleotides and duplex stems ranging from 1 to 30 base pairs, RNA sequence designs at 37°C typically succeed in satisfying a stop condition with ensemble defect less than N/100. Empirically, the sequence design algorithm exhibits asymptotic optimality and the exponent in the time complexity bound is shar
Report on opportunities and/or techniques for high-caliber experimental research (other) proposals for SSPEX
Brief discriptions of the following 13 experiments are included: ultrahigh vacuum petrology facility; artificial comet free flyer; artificial comet (tethered); cosmic dust detector; cosmic dust collector; dust collection using tethered satellites; artificial magnetosphere; microgravity petrological studies; slitless ultraviolet spectrometer; orbital determination and capture experiment (ODACE); high velocity sputtering of amorphous silicates; particle release experiments; and calibration of gamma and X-ray remote sensingprobes
Genomic prediction and quantitative trait locus discovery in a cassava training population constructed from multiple breeding stages
Open Access Article; Published online: 11 Dec 2019Assembly of a training population (TP) is an important component of effective genomic selectionâbased breeding programs. In this study, we examined the power of diverse germplasm assembled from two cassava (Manihot esculenta Crantz) breeding programs in Tanzania at different breeding stages to predict traits and discover quantitative trait loci (QTL). This is the first genomic selection and genomeâwide association study (GWAS) on Tanzanian cassava data. We detected QTL associated with cassava mosaic disease (CMD) resistance on chromosomes 12 and 16; QTL conferring resistance to cassava brown streak disease (CBSD) on chromosomes 9 and 11; and QTL on chromosomes 2, 3, 8, and 10 associated with resistance to CBSD for root necrosis. We detected a QTL on chromosome 4 and two QTL on chromosome 12 conferring dual resistance to CMD and CBSD. The use of clones in the same stage to construct TPs provided higher trait prediction accuracy than TPs with a mixture of clones from multiple breeding stages. Moreover, clones in the early breeding stage provided more reliable trait prediction accuracy and are better candidates for constructing a TP. Although larger TP sizes have been associated with improved accuracy, in this study, adding clones from Kibaha to those from Ukiriguru and vice versa did not improve the prediction accuracy of either population. Including the Ugandan TP in either population did not improve trait prediction accuracy. This study applied genomic prediction to understand the implications of constructing TP from clones at different breeding stages pooled from different locations on trait accuracy
- âŠ