Dynamic modeling of a human-inspired robot based on a Newton-Euler approach

This work deals with the modeling process of a new three dimensional human-like robot for an inverse dynamic analysis. This robot intends to be utilized by caregivers to assist persons with reduced mobility (such as the elderly). The model under analysis is composed by 24 rigid bodies: 3 to represent the robot’s base and locomotion, 4 for the lower limbs and torso, 7 for each arm, and 3 for the head. The resulting multibody system has 19 degrees-of-freedom driven by 4 linear actuators and 15 revolute motors. The proposed approach was implemented using an in-house computational code, and validated against a commercial software for a general spatial motion. The outcomes achieved show that the proposed formulation is computationally effective both in terms of efficiency and accuracy. The general findings of this study are promising and useful for the mechanical design and construction of a real human-like robot prototype

Trends in the control of hexapod robots: a survey

The static stability of hexapods motivates their design for tasks in which stable locomotion is required, such as navigation across complex environments. This task is of high interest due to the possibility of replacing human beings in exploration, surveillance and rescue missions. For this application, the control system must adapt the actuation of the limbs according to their surroundings to ensure that the hexapod does not tumble during locomotion. The most traditional approach considers their limbs as robotic manipulators and relies on mechanical models to actuate them. However, the increasing interest in model-free models for the control of these systems has led to the design of novel solutions. Through a systematic literature review, this paper intends to overview the trends in this field of research and determine in which stage the design of autonomous and adaptable controllers for hexapods is.The first author received funding through a doctoral scholarship from the Portuguese Foundation for Science and Technology (FCT) (Grant No. SFRH/BD/145818/2019), with funds from the Portuguese Ministry of Science, Technology and Higher Education and the European Social Fund through the Programa Operacional Regional Norte. This work has been supported by the FCT national funds, under the national support to R&D units grant, through the reference project UIDB/04436/2020 and UIDP/04436/2020

Multibody model of the collaborative human-inspired robot charmie

With the worldwide ageing of population, domestic robots can provide important aid by assisting elderly persons with mobility limitations, increasing their autonomy, while reducing caretaker fatigue. Currently, a human-like mobile system, called CHARMIE, is being assembled, which can be applied for those situations. For this purpose, a full multibody model has been developed, which allows for the assessment of the robot’s performance as well as its structural analysis and actuators’ selection. The robot multibody model consists of 40 rigid bodies, interconnected by 34 ideal revolute joints, 10 translational joints, and three rigid joints, resulting in a total of 21 degrees of freedom, namely three for the locomotion, two for the hip, seven for each arm and two for the neck. The system is driven by four linear actuators and 17 motors. The multibody dynamic simulations use an in-house software structured around two approaches: a recursive forward kinematics algorithm based on Euler angles, and a recursive Newton-Euler formulation for solving inverse dynamics. For implementing these approaches, the robot has been modelled as three serial kinematic chains, all starting from its base and finishing in the left end-effector, right end-effector, and head respectively. This work focuses on the model developed for the motion simulation of CHARMIE. The proposed methodology includes seven main steps: (i) identify the main bodies and kinematic chains; (ii) convert the body properties into the required software inputs; (iii) analyze the geometry of the indirectly actuated joints; (iv) model the kinematics of the main bodies with the first recursive algorithm; (v) determine the kinematics of additional bodies; (vi) solve the inverse dynamics of the main bodies with the second recursive algorithm; (vii) manually compute the dynamics of the closed and overconstrained loops. The overall outcomes produced have been validated against those obtained by a commercial software

Hexapod posture control for navigation across complex environments

Hexapod locomotion in unstructured environments relies on an efficient posture adjustment with the terrain topology. This paper presents a strategy to adapt the hexapod torso orientation through ground plane estimation. With an Inertial Measurement Unit (IMU) and the robot kinematic model, the current supporting feet coordinates are calculated, and the relative inclination between the ground and the torso angular position can be obtained. This information is used to adjust the novel foothold positions, in order to ensure the hexapod posture remains stable. The torso height is also controlled to avoid collisions with the ground asperities and decrease its deviation during motion. The proposed method is evaluated in a complex terrain made of 0.1×0.1 m blocks with variable height, causing different slopes across the field. Through result analysis, a significant behavior improvement is observed, due to the reduction of the torso posture oscillation and the increase of its locomotion efficiency.The first author received funding through a doctoral scholarship from the Portuguese Foundation for Science and Technology (FCT) (Grant No. SFRH/BD/145818/2019), with funds from the Portuguese Ministry of Science, Technology and Higher Education and the European Social Fund through the Programa Operacional Regional Norte. This work has been supported by FCT within the R&D Units Project Scope: UIDB/00319/2020, UIDB/04436/2020 and UIDP/04436/2020

The Influence of Parental Dietary Behaviors and Practices on Children’s Eating Habits

Poor dietary habits established during childhood might persist into adulthood, increasing the risk of developing obesity and obesity-related complications such as Type 2 Diabetes Mellitus. It has been found that early modifications in eating habits, especially during childhood, might promote health and decrease the risk of developing diseases during later life. Various studies found a great influence of parental dietary habits on dietary behaviors of their children regardless of demographic characteristics such as gender, age, socioeconomic status and country; however, the exact mechanism is still not clear. Therefore, in this review, we aimed to investigate both parents' and children's dietary behaviors, and to provide evidence for the potential influence of parents' dietary behaviors and practices on certain children's eating habits. Family meals were found to contribute the most in modeling children's dietary habits as they represent an important moment of control and interaction between parents and their children. The parental practices that influenced their children most were role modeling and moderate restriction, suggesting that the increase of parental encouragement and decrease of excessive pressure could have a positive impact in their children's dietary behaviors. This narrative review highlights that parental child-feeding behaviors should receive more attention in research studies as modifiable risk factors, which could help to design future dietary interventions and policies to prevent dietary-related diseases

Study of the locomotion of a hexapod using CoppeliaSim and ROS

Generating adaptive locomotion has seen a growing interest for the design of hexapods due to improving the autonomy of these robots, allowing them to execute tasks in more demanding environments. Data from the robot’s surrounding must be acquired and processed to adjust the locomotion, and aid with the actuation of the six limbs. This paper aims at using force sensors placed on the feet of a hexapod to control the changes of the gait phase of each limb. These sensors also assist in the search of new footholds when no contact forces are established with the ground. The system is tested in a smooth irregular terrain with obstacles, steps, and ramps, using CoppeliaSim and ROS (Robot Operating System), to dynamically evaluate the behavior of the hexapod.(undefined

Raman threshold for nth-order cascade Raman amplification

We study theoretically and experimentally Raman threshold for 1, 2, ... , n orders Stokes in a free running configuration. Using alternative way to solve the differential coupled equations that describe the stimulate Raman scattering, we find simple mathematical expressions that allow calculating the necessary pumping power to obtain Raman threshold for nth-order Stokes and the maximum output power available in each Stokes. The theoretical calculations coincide with the results obtained experimentally

Toughening of Nb2O5 doped zirconia biomaterial fabricated by microwave sintering technology

Pòster presentat a Euromat 2017, Thessaloniki (Greece), 17-22 september 2017The aim of this research is to investigate the characteristics and mechanical properties of Nb2O5 doped zirconia. Samples of partially stabilized-zirconia (3Y-TZP) with Nb2O5 in amounts of 0.15-1.5 mol.% were prepared by sol–gel technique and sintered by non-conventional microwave process