Coupling Matrix Representation of Nonreciprocal Filters Based on Time Modulated Resonators

This paper addresses the analysis and design of non-reciprocal filters based on time modulated resonators. We analytically show that time modulating a resonator leads to a set of harmonic resonators composed of the unmodulated lumped elements plus a frequency invariant element that accounts for differences in the resonant frequencies. We then demonstrate that harmonic resonators of different order are coupled through non-reciprocal admittance inverters whereas harmonic resonators of the same order couple with the admittance inverter coming from the unmodulated filter network. This coupling topology provides useful insights to understand and quickly design non-reciprocal filters and permits their characterization using an asynchronously tuned coupled resonators network together with the coupling matrix formalism. Two designed filters, of orders three and four, are experimentally demonstrated using quarter wavelength resonators implemented in microstrip technology and terminated by a varactor on one side. The varactors are biased using coplanar waveguides integrated in the ground plane of the device. Measured results are found to be in good agreement with numerical results, validating the proposed theory

Nonreciprocal Wavefront Engineering with Time-Modulated Gradient Metasurfaces

We propose a paradigm to realize nonreciprocal wavefront engineering using time-modulated gradient metasurfaces. The essential building block of these surfaces is a subwavelength unit cell whose reflection coefficient oscillates at low frequency. We demonstrate theoretically and experimentally that such modulation permits tailoring the phase and amplitude of any desired nonlinear harmonic and determines the behavior of all other emerging fields. By appropriately adjusting the phase delay applied to the modulation of each unit cell, we realize time-modulated gradient metasurfaces that provide efficient conversion between two desired frequencies and enable nonreciprocity by (i) imposing drastically different phase gradients during the up/down conversion processes and (ii) exploiting the interplay between the generation of certain nonlinear surface and propagative waves. To demonstrate the performance and broad reach of the proposed platform, we design and analyze metasurfaces able to implement various functionalities, including beam steering and focusing, while exhibiting strong and angle-insensitive nonreciprocal responses. Our findings open an alternative direction in the field of gradient metasurfaces, in which wavefront control and magnetic-free nonreciprocity are locally merged to manipulate the scattered fields

Analysis of Finite Microstrip Structures Using an Efficient Implementation of the Integral Equation Technique

An efficient numerical implementation of the Integral Equation technique (IE) has been developed for the analysis of the electrical characteristics of finite microstrip structures. The technique formulates a volume version of the IE for the finite dielectric objects, and a standard surface IE technique for the metallic areas. The system of integral equations formu- lated are solved with special numerical techniques described in this paper. The input impedances of several microstrip antennas have been computed, showing good agreement with respect mea- surements. The technique has shown to be accurate even for complex geometries containing several stacked dielectric layers. The radiation patterns of the structures have also been com- puted, and measured results from real manufactured hardware confirm that backside radiation and secondary lobes are accurately predicted by the theoretical model. The paper also discuss a suitable excitation model for finite size ground planes, and investigates the possibilities for an independent meshing of the metallic areas and the dielectric objects inside a given geom- etry. The practical value of the approach derived is that microstrip circuits can be designed minimizing the volume and size of the dielectric substrates.This work has been supported bythe Spanish National Project ESP2001-4546-PE, and RegionalSeneca Project PB/4/FS/02

Synthesis and design of suspended substrate stripline filters for digital microwave power amplifiers

In this paper, a synthesis method for suspended substrate stripline filters for digital microwave power amplifier applications is presented. The synthesis method combines a lumped element and full-wave mixed approach in a very efficient way. In order to achieve high amplifier efficiency the filter must exhibit a high input impedance in the stopband. This has been implemented for the first time by using a capacitively end coupled filter combined with stepped impedance resonators. A third order filter was designed. Simulations show that the final stage drain efficiency of the power amplifier and suppression of out-of-band frequency components can be significantly improved when the new structure is used

Wide-band full-wave electromagnetic modal analysis of the coupling between dark-matter axions and photons in microwave resonators

The electromagnetic coupling axion-photon in a microwave cavity is revisited with the Boundary Integral - Resonant Mode Expansion (BI-RME) 3D technique. Such full-wave modal technique has been applied for the rigorous analysis of the excitation of a microwave cavity with an axion field. In this scenario, the electromagnetic field generated by the axion-photon coupling can be assumed to be driven by equivalent electrical charge and current densities. These densities have been inserted in the general BI-RME 3D equations, which express the RF electromagnetic field existing within a cavity as an integral involving the Dyadic Green functions of the cavity (under Coulomb gauge) as well as such densities. This method is able to take into account any arbitrary spatial and temporal variation of both magnitude and phase of the axion field. Next, we have obtained a simple network driven by the axion current source, which represents the coupling between the axion field and the resonant modes of the cavity. With this approach, it is possible to calculate the extracted and dissipated RF power as a function of frequency along a broad band and without Cauchy-Lorentz approximations, obtaining the spectrum of the electromagnetic field generated in the cavity, and dealing with modes relatively close to the axion resonant mode. Moreover, with this technique we have a complete knowledge of the signal extracted from the cavity, not only in magnitude but also in phase. This can be an interesting issue for future analysis where the axion phase is an important parameter.Comment: 37 pages, 14 figures, 40 reference